include/configs/dlvision.h

   1 /*
   2  * (C) Copyright 2009
   3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #define CONFIG_405EP            1       /* this is a PPC405 CPU */
  12 #define CONFIG_DLVISION         1       /*  on a Neo board */
  13
  14 #define CONFIG_SYS_TEXT_BASE    0xFFFC0000
  15
  16 /*
  17  * Include common defines/options for all AMCC eval boards
  18  */
  19 #define CONFIG_HOSTNAME         dlvision
  20 #define CONFIG_IDENT_STRING     " dlvision 0.02"
  21 #include "amcc-common.h"
  22
  23 #define CONFIG_BOARD_EARLY_INIT_F       /* call board_early_init_f */
  24 #define CONFIG_MISC_INIT_R              /* call misc_init_r */
  25
  26 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
  27
  28 /*
  29  * Configure PLL
  30  */
  31 #define PLLMR0_DEFAULT PLLMR0_266_133_66_33
  32 #define PLLMR1_DEFAULT PLLMR1_266_133_66_33
  33
  34 /* new uImage format support */
  35 #define CONFIG_FIT_DISABLE_SHA256
  36
  37 #define CONFIG_ENV_IS_IN_FLASH  /* use FLASH for environment vars */
  38
  39 /*
  40  * Default environment variables
  41  */
  42 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  43         CONFIG_AMCC_DEF_ENV                                             \
  44         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
  45         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
  46         "kernel_addr=fc000000\0"                                        \
  47         "fdt_addr=fc1e0000\0"                                           \
  48         "ramdisk_addr=fc200000\0"                                       \
  49         ""
  50
  51 #define CONFIG_PHY_ADDR         4       /* PHY address                  */
  52 #define CONFIG_HAS_ETH0
  53 #define CONFIG_HAS_ETH1
  54 #define CONFIG_PHY1_ADDR        0xc     /* EMAC1 PHY address            */
  55 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ
  56
  57 /*
  58  * Commands additional to the ones defined in amcc-common.h
  59  */
  60 #define CONFIG_CMD_DTT
  61 #undef CONFIG_CMD_DIAG
  62 #undef CONFIG_CMD_EEPROM
  63 #undef CONFIG_CMD_IRQ
  64
  65 /*
  66  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
  67  */
  68 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0 */
  69
  70 /* SDRAM timings used in datasheet */
  71 #define CONFIG_SYS_SDRAM_CL             3       /* CAS latency */
  72 #define CONFIG_SYS_SDRAM_tRP           20       /* PRECHARGE command period */
  73 #define CONFIG_SYS_SDRAM_tRC           66       /* ACTIVE-to-ACTIVE period */
  74 #define CONFIG_SYS_SDRAM_tRCD          20       /* ACTIVE-to-READ delay */
  75 #define CONFIG_SYS_SDRAM_tRFC          66       /* Auto refresh period */
  76
  77 /*
  78  * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
  79  * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
  80  * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
  81  * The Linux BASE_BAUD define should match this configuration.
  82  *    baseBaud = cpuClock/(uartDivisor*16)
  83  * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  84  * set Linux BASE_BAUD to 403200.
  85  */
  86 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
  87 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
  88 #undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
  89 #define CONFIG_SYS_BASE_BAUD            691200
  90
  91 /*
  92  * I2C stuff
  93  */
  94 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           100000
  95
  96 /*
  97  * FLASH organization
  98  */
  99 #define CONFIG_SYS_FLASH_CFI            /* The flash is CFI compatible  */
 100 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
 101
 102 #define CONFIG_SYS_FLASH_BASE           0xFC000000
 103 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 104
 105 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks */
 106 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max num of sectors per chip*/
 107
 108 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase/ms */
 109 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write/ms */
 110
 111 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buff'd writes */
 112
 113 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* 'E' for empty sector on flinfo */
 114 #define CONFIG_SYS_FLASH_QUIET_TEST     1       /* no warn upon unknown flash */
 115
 116 #ifdef CONFIG_ENV_IS_IN_FLASH
 117 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector */
 118 #define CONFIG_ENV_ADDR         ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
 119 #define CONFIG_ENV_SIZE         0x2000  /* Total Size of Environment Sector */
 120
 121 /* Address and size of Redundant Environment Sector     */
 122 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 123 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 124 #endif
 125
 126 /*
 127  * PPC405 GPIO Configuration
 128  */
 129 #define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO     Alternate1      */ \
 130 { \
 131 /* GPIO Core 0 */ \
 132 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0   PerBLast */ \
 133 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO1   TS1E */ \
 134 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO2   TS2E */ \
 135 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO3   TS1O */ \
 136 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO4   TS2O */ \
 137 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1      }, /* GPIO5   TS3 */ \
 138 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO6   TS4 */ \
 139 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO7   TS5 */ \
 140 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO8   TS6 */ \
 141 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO9   TrcClk */ \
 142 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10  PerCS1 */ \
 143 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11  PerCS2 */ \
 144 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12  PerCS3 */ \
 145 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13  PerCS4 */ \
 146 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14  PerAddr03 */ \
 147 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15  PerAddr04 */ \
 148 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16  PerAddr05 */ \
 149 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17  IRQ0 */ \
 150 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18  IRQ1 */ \
 151 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19  IRQ2 */ \
 152 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO20  IRQ3 */ \
 153 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO21  IRQ4 */ \
 154 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO22  IRQ5 */ \
 155 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO23  IRQ6 */ \
 156 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24  UART0_DCD */ \
 157 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25  UART0_DSR */ \
 158 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26  UART0_RI */ \
 159 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27  UART0_DTR */ \
 160 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28  UART1_Rx */ \
 161 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29  UART1_Tx */ \
 162 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO30  RejectPkt0 */ \
 163 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO31  RejectPkt1 */ \
 164 } \
 165 }
 166
 167 /*
 168  * Definitions for initial stack pointer and data area (in data cache)
 169  */
 170 /* use on chip memory (OCM) for temperary stack until sdram is tested */
 171 #define CONFIG_SYS_TEMP_STACK_OCM        1
 172
 173 /* On Chip Memory location */
 174 #define CONFIG_SYS_OCM_DATA_ADDR        0xF8000000
 175 #define CONFIG_SYS_OCM_DATA_SIZE        0x1000
 176 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
 177 #define CONFIG_SYS_INIT_RAM_SIZE        CONFIG_SYS_OCM_DATA_SIZE /* Size of used area */
 178
 179 #define CONFIG_SYS_GBL_DATA_OFFSET \
 180         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 181 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 182
 183 /*
 184  * External Bus Controller (EBC) Setup
 185  */
 186
 187 /* Memory Bank 0 (NOR-FLASH) initialization */
 188 #define CONFIG_SYS_EBC_PB0AP            0x92015480
 189 /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */
 190 #define CONFIG_SYS_EBC_PB0CR            0xFC0DA000
 191
 192 /* Memory Bank 1 (NVRAM) initializatio */
 193 #define CONFIG_SYS_EBC_PB1AP            0x92015480
 194 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit  */
 195 #define CONFIG_SYS_EBC_PB1CR            0xFB858000
 196
 197 /* Memory Bank 2 (UART) initialization */
 198 #define CONFIG_UART_BASE                0x7f100000
 199 #define CONFIG_SYS_EBC_PB2AP            0x92015480
 200 /* BAS=0x7f1,BS=1MB,BU=R/W,BW=8bit */
 201 #define CONFIG_SYS_EBC_PB2CR            0x7f118000
 202
 203 /* Memory Bank 3 (Latches) initialization */
 204 #define CONFIG_SYS_LATCH_BASE           0x7f200000
 205 #define CONFIG_SYS_EBC_PB3AP            0x92015480
 206 /* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */
 207 #define CONFIG_SYS_EBC_PB3CR            0x7f21a000
 208
 209 #endif  /* __CONFIG_H */