include/configs/dns325.h

   1 /*
   2  * Copyright (C) 2011
   3  * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_DNS325_H
  14 #define _CONFIG_DNS325_H
  15
  16 /*
  17  * Machine number definition
  18  */
  19 #define MACH_TYPE_DNS325                3800
  20 #define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  21
  22 /*
  23  * High Level Configuration Options (easy to change)
  24  */
  25 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  26 #define CONFIG_KW88F6281                /* SOC Name */
  27 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  28
  29 /*
  30  * Commands configuration
  31  */
  32 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  33 #define CONFIG_CMD_ENV
  34 #define CONFIG_CMD_NAND
  35 #define CONFIG_CMD_IDE
  36 #define CONFIG_CMD_DATE
  37 #define CONFIG_SYS_MVFS
  38
  39 #define CONFIG_NR_DRAM_BANKS            1
  40
  41 /*
  42  * mv-common.h should be defined after CMD configs since it used them
  43  * to enable certain macros
  44  */
  45 #include "mv-common.h"
  46
  47 /* Remove or override few declarations from mv-common.h */
  48
  49 /*
  50  * Ethernet Driver configuration
  51  */
  52 #ifdef CONFIG_CMD_NET
  53 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  54 #define CONFIG_NETCONSOLE
  55 #endif
  56
  57 /*
  58  * SATA Driver configuration
  59  */
  60 #ifdef CONFIG_MVSATA_IDE
  61 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  62 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  63 #endif
  64
  65 /*
  66  * RTC driver configuration
  67  */
  68 #ifdef CONFIG_CMD_DATE
  69 #define CONFIG_RTC_MV
  70 #endif
  71
  72 /*
  73  * Enable GPI0 support
  74  */
  75 #define CONFIG_KIRKWOOD_GPIO
  76
  77 /*
  78  * Console configuration
  79  */
  80 #define CONFIG_CONSOLE_MUX
  81 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  82
  83 /*
  84  * Environment variables configurations
  85  */
  86 #ifdef CONFIG_CMD_NAND
  87 #define CONFIG_ENV_IS_IN_NAND
  88 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
  89 #else
  90 #define CONFIG_ENV_IS_NOWHERE
  91 #endif
  92
  93 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
  94 #define CONFIG_ENV_ADDR                 0xe0000
  95 #define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
  96
  97 /*
  98  * Default environment variables
  99  */
 100 #define MTDIDS_DEFAULT                  "nand0=orion_nand"
 101
 102 #define MTDPARTS_DEFAULT                "mtdparts=orion_nand:" \
 103         "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
 104
 105 #define CONFIG_EXTRA_ENV_SETTINGS \
 106         "stdin=serial\0" \
 107         "stdout=serial\0" \
 108         "stderr=serial\0" \
 109         "loadaddr=0x800000\0" \
 110         "autoload=no\0" \
 111         "console=ttyS0,115200\0" \
 112         "mtdparts="MTDPARTS_DEFAULT \
 113         "optargs=\0" \
 114         "bootenv=uEnv.txt\0" \
 115         "importbootenv=echo Importing environment ...; " \
 116                 "env import -t ${loadaddr} ${filesize}\0" \
 117         "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
 118         "setbootargs=setenv bootargs console=${console} " \
 119                 "${optargs} " \
 120                 "${mtdparts} " \
 121                 "root=${bootenvroot} " \
 122                 "rootfstype=${bootenvrootfstype}\0" \
 123         "subbootcmd=run setbootargs; " \
 124                 "if run bootenvloadimage; then " \
 125                         "bootm ${loadaddr};" \
 126                 "fi;\0" \
 127         "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 128         "nandrootfstype=ubifs\0" \
 129         "nandloadimage=nand read ${loadaddr} kernel\0" \
 130         "setnandbootenv=echo Booting from nand ...; " \
 131                 "setenv bootenvroot ${nandroot}; " \
 132                 "setenv bootenvrootfstype ${nandrootfstype}; " \
 133                 "setenv bootenvloadimage ${nandloadimage}\0"
 134
 135 #define CONFIG_BOOTCOMMAND \
 136         "if test -n ${bootenv} && usb start; then " \
 137                 "if run loadbootenv; then " \
 138                         "echo Loaded environment ${bootenv} from usb;" \
 139                         "run importbootenv;" \
 140                 "fi;" \
 141                 "if test -n ${bootenvcmd}; then " \
 142                         "echo Running bootenvcmd ...;" \
 143                         "run bootenvcmd;" \
 144                 "fi;" \
 145         "fi;" \
 146         "run setnandbootenv subbootcmd;"
 147
 148 #endif /* _CONFIG_DNS325_H */