include/configs/dns325.h

   1 /*
   2  * Copyright (C) 2011
   3  * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_DNS325_H
  14 #define _CONFIG_DNS325_H
  15
  16 /*
  17  * Machine number definition
  18  */
  19 #define MACH_TYPE_DNS325                3800
  20 #define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  21 #define CONFIG_IDENT_STRING             "\nD-Link DNS-325"
  22
  23 /*
  24  * High Level Configuration Options (easy to change)
  25  */
  26 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  27 #define CONFIG_KW88F6281                /* SOC Name */
  28 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  29 #define CONFIG_SYS_GENERIC_BOARD
  30
  31 /*
  32  * Commands configuration
  33  */
  34 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  35 #include <config_cmd_default.h>
  36 #define CONFIG_CMD_DHCP
  37 #define CONFIG_CMD_ENV
  38 #define CONFIG_CMD_NAND
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_USB
  41 #define CONFIG_CMD_IDE
  42 #define CONFIG_CMD_DATE
  43 #define CONFIG_SYS_MVFS
  44
  45 #define CONFIG_NR_DRAM_BANKS            1
  46
  47 /*
  48  * mv-common.h should be defined after CMD configs since it used them
  49  * to enable certain macros
  50  */
  51 #include "mv-common.h"
  52
  53 /* Remove or override few declarations from mv-common.h */
  54 #undef CONFIG_SYS_PROMPT
  55
  56 /*
  57  * Ethernet Driver configuration
  58  */
  59 #ifdef CONFIG_CMD_NET
  60 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  61 #define CONFIG_NETCONSOLE
  62 #endif
  63
  64 /*
  65  * SATA Driver configuration
  66  */
  67 #ifdef CONFIG_MVSATA_IDE
  68 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  69 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  70 #endif
  71
  72 /*
  73  * RTC driver configuration
  74  */
  75 #ifdef CONFIG_CMD_DATE
  76 #define CONFIG_RTC_MV
  77 #endif
  78
  79 /*
  80  * Enable GPI0 support
  81  */
  82 #define CONFIG_KIRKWOOD_GPIO
  83
  84 /*
  85  * Use the HUSH parser
  86  */
  87 #define CONFIG_SYS_HUSH_PARSER
  88
  89 /*
  90  * Console configuration
  91  */
  92 #define CONFIG_CONSOLE_MUX
  93 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  94
  95 /*
  96  * Enable device tree support
  97  */
  98 #define CONFIG_OF_LIBFDT
  99
 100 /*
 101  * Display cpu info at boot
 102  */
 103 #define CONFIG_DISPLAY_CPUINFO
 104
 105 /*
 106  * Environment variables configurations
 107  */
 108 #ifdef CONFIG_CMD_NAND
 109 #define CONFIG_ENV_IS_IN_NAND
 110 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
 111 #else
 112 #define CONFIG_ENV_IS_NOWHERE
 113 #endif
 114
 115 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
 116 #define CONFIG_ENV_ADDR                 0xe0000
 117 #define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
 118
 119 /*
 120  * Default environment variables
 121  */
 122 #define MTDIDS_DEFAULT                  "nand0=orion_nand"
 123
 124 #define MTDPARTS_DEFAULT                "mtdparts=orion_nand:" \
 125         "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
 126
 127 #define CONFIG_EXTRA_ENV_SETTINGS \
 128         "stdin=serial\0" \
 129         "stdout=serial\0" \
 130         "stderr=serial\0" \
 131         "loadaddr=0x800000\0" \
 132         "autoload=no\0" \
 133         "console=ttyS0,115200\0" \
 134         "mtdparts="MTDPARTS_DEFAULT \
 135         "optargs=\0" \
 136         "bootenv=uEnv.txt\0" \
 137         "importbootenv=echo Importing environment ...; " \
 138                 "env import -t ${loadaddr} ${filesize}\0" \
 139         "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
 140         "setbootargs=setenv bootargs console=${console} " \
 141                 "${optargs} " \
 142                 "${mtdparts} " \
 143                 "root=${bootenvroot} " \
 144                 "rootfstype=${bootenvrootfstype}\0" \
 145         "subbootcmd=run setbootargs; " \
 146                 "if run bootenvloadimage; then " \
 147                         "bootm ${loadaddr};" \
 148                 "fi;\0" \
 149         "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 150         "nandrootfstype=ubifs\0" \
 151         "nandloadimage=nand read ${loadaddr} kernel\0" \
 152         "setnandbootenv=echo Booting from nand ...; " \
 153                 "setenv bootenvroot ${nandroot}; " \
 154                 "setenv bootenvrootfstype ${nandrootfstype}; " \
 155                 "setenv bootenvloadimage ${nandloadimage}\0"
 156
 157 #define CONFIG_BOOTCOMMAND \
 158         "if test -n ${bootenv} && usb start; then " \
 159                 "if run loadbootenv; then " \
 160                         "echo Loaded environment ${bootenv} from usb;" \
 161                         "run importbootenv;" \
 162                 "fi;" \
 163                 "if test -n ${bootenvcmd}; then " \
 164                         "echo Running bootenvcmd ...;" \
 165                         "run bootenvcmd;" \
 166                 "fi;" \
 167         "fi;" \
 168         "run setnandbootenv subbootcmd;"
 169
 170 #endif /* _CONFIG_DNS325_H */