include/configs/dockstar.h

   1 /*
   2  * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
   3  *
   4  * Based on sheevaplug.h originally written by
   5  * Prafulla Wadaskar <prafulla@marvell.com>
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_DOCKSTAR_H
  13 #define _CONFIG_DOCKSTAR_H
  14
  15 #define CONFIG_SYS_GENERIC_BOARD
  16
  17 /*
  18  * Version number information
  19  */
  20 #define CONFIG_IDENT_STRING     "\nSeagate FreeAgent DockStar"
  21
  22 /*
  23  * High Level Configuration Options (easy to change)
  24  */
  25 #define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  26 #define CONFIG_KW88F6281        1       /* SOC Name */
  27 #define CONFIG_MACH_DOCKSTAR    /* Machine type */
  28 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  29
  30 /*
  31  * Commands configuration
  32  */
  33 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  34 #include <config_cmd_default.h>
  35 #define CONFIG_CMD_DHCP
  36 #define CONFIG_CMD_ENV
  37 #define CONFIG_CMD_MII
  38 #define CONFIG_CMD_NAND
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_USB
  41 /*
  42  * mv-common.h should be defined after CMD configs since it used them
  43  * to enable certain macros
  44  */
  45 #include "mv-common.h"
  46
  47 #undef CONFIG_SYS_PROMPT        /* previously defined in mv-common.h */
  48 #define CONFIG_SYS_PROMPT       "DockStar> "    /* Command Prompt */
  49
  50 /*
  51  *  Environment variables configurations
  52  */
  53 #ifdef CONFIG_CMD_NAND
  54 #define CONFIG_ENV_IS_IN_NAND           1
  55 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  56 #else
  57 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  58 #endif
  59 /*
  60  * max 4k env size is enough, but in case of nand
  61  * it has to be rounded to sector size
  62  */
  63 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  64 #define CONFIG_ENV_ADDR                 0x60000
  65 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  66
  67 /*
  68  * Default environment variables
  69  */
  70 #define CONFIG_BOOTCOMMAND \
  71         "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "     \
  72         "ubi part root; " \
  73         "ubifsmount ubi:root; " \
  74         "ubifsload 0x800000 ${kernel}; " \
  75         "ubifsload 0x1100000 ${initrd}; " \
  76         "bootm 0x800000 0x1100000"
  77
  78 #define CONFIG_MTDPARTS         "mtdparts=orion_nand:1m(uboot),-(root)\0"
  79
  80 #define CONFIG_EXTRA_ENV_SETTINGS \
  81         "console=console=ttyS0,115200\0" \
  82         "mtdids=nand0=orion_nand\0" \
  83         "mtdparts="CONFIG_MTDPARTS \
  84         "kernel=/boot/uImage\0" \
  85         "initrd=/boot/uInitrd\0" \
  86         "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0"
  87
  88 /*
  89  * Ethernet Driver configuration
  90  */
  91 #ifdef CONFIG_CMD_NET
  92 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  93 #define CONFIG_PHY_BASE_ADR     0
  94 #endif /* CONFIG_CMD_NET */
  95
  96 /*
  97  * File system
  98  */
  99 #define CONFIG_CMD_EXT2
 100 #define CONFIG_CMD_FAT
 101 #define CONFIG_CMD_JFFS2
 102 #define CONFIG_CMD_UBI
 103 #define CONFIG_CMD_UBIFS
 104 #define CONFIG_RBTREE
 105 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 106 #define CONFIG_MTD_PARTITIONS
 107 #define CONFIG_CMD_MTDPARTS
 108 #define CONFIG_LZO
 109
 110 #endif /* _CONFIG_DOCKSTAR_H */