include/configs/dragonboard410c.h

   1 /*
   2  * Board configuration file for Dragonboard 410C
   3  *
   4  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIGS_DRAGONBOARD410C_H
  10 #define __CONFIGS_DRAGONBOARD410C_H
  11
  12 #include <linux/sizes.h>
  13 #include <asm/arch/sysmap-apq8016.h>
  14
  15 #define CONFIG_MISC_INIT_R /* To stop autoboot */
  16
  17 /* Physical Memory Map */
  18 #define CONFIG_NR_DRAM_BANKS            1
  19 #define PHYS_SDRAM_1                    0x80000000
  20 /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
  21 #define PHYS_SDRAM_1_SIZE               0x3da00000
  22 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  23 #define CONFIG_SYS_TEXT_BASE            0x80080000
  24 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  25 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x80000)
  26 #define CONFIG_SYS_BOOTM_LEN            0x1000000 /* 16MB max kernel size */
  27
  28 /* UART */
  29
  30 /* Generic Timer Definitions */
  31 #define COUNTER_FREQUENCY               19000000
  32
  33 #define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
  34
  35 /* Fixup - in init code we switch from device to host mode,
  36  * it has to be done after each HCD reset */
  37 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  38
  39 /* Support all possible USB ethernet dongles */
  40
  41 /* Extra Commands */
  42 /* Enable that for switching of boot partitions */
  43 /* Disabled by default as some sub-commands can brick eMMC */
  44 /*#define CONFIG_SUPPORT_EMMC_BOOT */
  45
  46 /* Partition table support */
  47 #define HAVE_BLOCK_DEVICE /* Needed for partition commands */
  48
  49 #include <config_distro_defaults.h>
  50
  51 /* BOOTP options */
  52 #define CONFIG_BOOTP_BOOTFILESIZE
  53
  54 #define BOOT_TARGET_DEVICES(func) \
  55         func(USB, usb, 0) \
  56         func(MMC, mmc, 1) \
  57         func(MMC, mmc, 0) \
  58         func(DHCP, dhcp, na)
  59
  60 #include <config_distro_bootcmd.h>
  61
  62 /* Does what recovery does */
  63 #define REFLASH(file, part) \
  64 "part start mmc 0 "#part" start && "\
  65 "part size mmc 0 "#part" size && "\
  66 "tftp $loadaddr "#file" && " \
  67 "mmc write $loadaddr $start $size && "
  68
  69 #define CONFIG_ENV_REFLASH \
  70 "mmc dev 0 && "\
  71 "usb start && "\
  72 "dhcp && "\
  73 "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
  74 "mmc write $loadaddr 0 43 && " \
  75 "mmc rescan && "\
  76 REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
  77 REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
  78 REFLASH(dragonboard/rescue/rpm.mbn, 3)\
  79 REFLASH(dragonboard/rescue/tz.mbn, 4)\
  80 REFLASH(dragonboard/rescue/hyp.mbn, 5)\
  81 REFLASH(dragonboard/rescue/sec.dat, 6)\
  82 REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
  83 REFLASH(dragonboard/u-boot.img, 8)\
  84 "usb stop &&"\
  85 "echo Reflash completed"
  86
  87 /* Environment */
  88 #define CONFIG_EXTRA_ENV_SETTINGS \
  89         "reflash="CONFIG_ENV_REFLASH"\0"\
  90         "loadaddr=0x81000000\0" \
  91         "fdt_high=0xffffffffffffffff\0" \
  92         "initrd_high=0xffffffffffffffff\0" \
  93         "linux_image=Image\0" \
  94         "kernel_addr_r=0x81000000\0"\
  95         "fdtfile=apq8016-sbc.dtb\0" \
  96         "fdt_addr_r=0x83000000\0"\
  97         "ramdisk_addr_r=0x84000000\0"\
  98         "scriptaddr=0x90000000\0"\
  99         "pxefile_addr_r=0x90100000\0"\
 100         BOOTENV
 101
 102 #define CONFIG_ENV_SIZE                 0x2000
 103 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 104
 105 /* Size of malloc() pool */
 106 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + SZ_8M)
 107
 108 /* Monitor Command Prompt */
 109 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 110 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 111
 112 #endif