include/configs/dreamplug.h

   1 /*
   2  * (C) Copyright 2011
   3  * Jason Cooper <u-boot@lakedaemon.net>
   4  *
   5  * Based on work by:
   6  * Marvell Semiconductor <www.marvell.com>
   7  * Written-by: Siddarth Gore <gores@marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_DREAMPLUG_H
  13 #define _CONFIG_DREAMPLUG_H
  14
  15 /*
  16  * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
  17  * from Linus' kernel.org tree.  This hasn't been updated primarily due to
  18  * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
  19  * here.
  20  */
  21 #include <asm/mach-types.h>
  22 #ifdef MACH_TYPE_DREAMPLUG
  23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
  24 #else
  25 #define MACH_TYPE_DREAMPLUG            3550
  26 #endif
  27
  28 /*
  29  * High Level Configuration Options (easy to change)
  30  */
  31 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  32 #define CONFIG_MACH_TYPE        MACH_TYPE_DREAMPLUG
  33
  34 /*
  35  * Commands configuration
  36  */
  37
  38 /*
  39  * mv-plug-common.h should be defined after CMD configs since it used them
  40  * to enable certain macros
  41  */
  42 #include "mv-plug-common.h"
  43
  44 /*
  45  *  Environment variables configurations
  46  */
  47 #ifdef CONFIG_SPI_FLASH
  48 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  49 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  50 #else
  51 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  52 #endif
  53
  54 #ifdef CONFIG_CMD_SF
  55 #define CONFIG_HARD_SPI                 1
  56 #define CONFIG_KIRKWOOD_SPI             1
  57 #define CONFIG_ENV_SPI_BUS              0
  58 #define CONFIG_ENV_SPI_CS               0
  59 #define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  60 #endif
  61
  62 /*
  63  * max 4k env size is enough, but in case of nand
  64  * it has to be rounded to sector size
  65  */
  66 #define CONFIG_ENV_SIZE                 0x1000  /* 4k */
  67 #define CONFIG_ENV_ADDR                 0x100000
  68 #define CONFIG_ENV_OFFSET               0x100000 /* env starts here */
  69
  70 /*
  71  * Default environment variables
  72  */
  73 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  74         "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  75         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  76         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  77         "bootm 0x6400000;"
  78
  79 #define CONFIG_EXTRA_ENV_SETTINGS       \
  80         "x_bootcmd_ethernet=ping 192.168.2.1\0" \
  81         "x_bootcmd_usb=usb start\0"     \
  82         "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  83         "x_bootargs=console=ttyS0,115200\0"     \
  84         "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
  85
  86 /*
  87  * Ethernet Driver configuration
  88  */
  89 #ifdef CONFIG_CMD_NET
  90 #define CONFIG_MVGBE_PORTS      {1, 1}  /* enable both ports */
  91 #define CONFIG_PHY_BASE_ADR     0
  92 #endif /* CONFIG_CMD_NET */
  93
  94 /*
  95  * SATA Driver configuration
  96  */
  97 #ifdef CONFIG_MVSATA_IDE
  98 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  99 #endif /*CONFIG_MVSATA_IDE*/
 100
 101 #endif /* _CONFIG_DREAMPLUG_H */