include/configs/edminiv2.h

   1 /*
   2  * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
   3  *
   4  * Based on original Kirkwood support which is
   5  * (C) Copyright 2009
   6  * Marvell Semiconductor <www.marvell.com>
   7  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_EDMINIV2_H
  13 #define _CONFIG_EDMINIV2_H
  14
  15 /*
  16  * SPL
  17  */
  18
  19 #define CONFIG_SPL_FRAMEWORK
  20 #define CONFIG_SPL_TEXT_BASE            0xffff0000
  21 #define CONFIG_SPL_MAX_SIZE             0x0000fff0
  22 #define CONFIG_SPL_STACK                0x00020000
  23 #define CONFIG_SPL_BSS_START_ADDR       0x00020000
  24 #define CONFIG_SPL_BSS_MAX_SIZE         0x0001ffff
  25 #define CONFIG_SYS_SPL_MALLOC_START     0x00040000
  26 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x0001ffff
  27 #define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/orion5x/u-boot-spl.lds"
  28 #define CONFIG_SYS_UBOOT_BASE           0xfff90000
  29 #define CONFIG_SYS_UBOOT_START          0x00800000
  30 #define CONFIG_SYS_TEXT_BASE            0x00800000
  31
  32 /*
  33  * High Level Configuration Options (easy to change)
  34  */
  35
  36 #define CONFIG_MARVELL          1
  37 #define CONFIG_FEROCEON         1       /* CPU Core subversion */
  38 #define CONFIG_88F5182          1       /* SOC Name */
  39 #define CONFIG_MACH_EDMINIV2    1       /* Machine type */
  40
  41 #include <asm/arch/orion5x.h>
  42 /*
  43  * CLKs configurations
  44  */
  45
  46 /*
  47  * Board-specific values for Orion5x MPP low level init:
  48  * - MPPs 12 to 15 are SATA LEDs (mode 5)
  49  * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for
  50  *   MPP16 to MPP19, mode 0 for others
  51  */
  52
  53 #define ORION5X_MPP0_7          0x00000003
  54 #define ORION5X_MPP8_15         0x55550000
  55 #define ORION5X_MPP16_23        0x00005555
  56
  57 /*
  58  * Board-specific values for Orion5x GPIO low level init:
  59  * - GPIO3 is input (RTC interrupt)
  60  * - GPIO16 is Power LED control (0 = on, 1 = off)
  61  * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
  62  * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
  63  * - GPIO19 is SATA disk power toggle (toggles on 0-to-1)
  64  * - GPIO22 is SATA disk power status ()
  65  * - GPIO23 is supply status for SATA disk ()
  66  * - GPIO24 is supply control for board (write 1 to power off)
  67  * Last GPIO is 25, further bits are supposed to be 0.
  68  * Enable mask has ones for INPUT, 0 for OUTPUT.
  69  * Default is LED ON, board ON :)
  70  */
  71
  72 #define ORION5X_GPIO_OUT_ENABLE         0xfef4f0ca
  73 #define ORION5X_GPIO_OUT_VALUE          0x00000000
  74 #define ORION5X_GPIO_IN_POLARITY        0x000000d0
  75
  76 /*
  77  * NS16550 Configuration
  78  */
  79
  80 #define CONFIG_SYS_NS16550_SERIAL
  81 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  82 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
  83 #define CONFIG_SYS_NS16550_COM1         ORION5X_UART0_BASE
  84
  85 /*
  86  * Serial Port configuration
  87  * The following definitions let you select what serial you want to use
  88  * for your console driver.
  89  */
  90
  91 #define CONFIG_CONS_INDEX       1       /*Console on UART0 */
  92 #define CONFIG_SYS_BAUDRATE_TABLE \
  93         { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
  94
  95 /*
  96  * FLASH configuration
  97  */
  98
  99 #define CONFIG_SYS_FLASH_CFI
 100 #define CONFIG_FLASH_CFI_DRIVER
 101 #define CONFIG_SYS_MAX_FLASH_BANKS      1  /* max num of flash banks       */
 102 #define CONFIG_SYS_MAX_FLASH_SECT       11 /* max num of sects on one chip */
 103 #define CONFIG_SYS_FLASH_BASE           0xfff80000
 104
 105 /* auto boot */
 106
 107 /*
 108  * For booting Linux, the board info and command line data
 109  * have to be in the first 8 MB of memory, since this is
 110  * the maximum mapped by the Linux kernel during initialization.
 111  */
 112 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs  */
 113 #define CONFIG_INITRD_TAG       1       /* enable INITRD tag */
 114 #define CONFIG_SETUP_MEMORY_TAGS 1      /* enable memory tag */
 115
 116 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
 117 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 118                 +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
 119 /*
 120  * Commands configuration
 121  */
 122
 123 /*
 124  * Network
 125  */
 126
 127 #ifdef CONFIG_CMD_NET
 128 #define CONFIG_MVGBE                            /* Enable Marvell GbE Driver */
 129 #define CONFIG_MVGBE_PORTS      {1}             /* enable port 0 only */
 130 #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION     /* don't randomize MAC */
 131 #define CONFIG_PHY_BASE_ADR     0x8
 132 #define CONFIG_RESET_PHY_R      /* use reset_phy() to init mv8831116 PHY */
 133 #define CONFIG_NETCONSOLE       /* include NetConsole support   */
 134 #define CONFIG_MII              /* expose smi ove miiphy interface */
 135 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
 136 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
 137 #endif
 138
 139 /*
 140  * IDE
 141  */
 142 #ifdef CONFIG_IDE
 143 #define __io
 144 #define CONFIG_IDE_PREINIT
 145 /* ED Mini V has an IDE-compatible SATA connector for port 1 */
 146 #define CONFIG_MVSATA_IDE
 147 #define CONFIG_MVSATA_IDE_USE_PORT1
 148 /* Needs byte-swapping for ATA data register */
 149 #define CONFIG_IDE_SWAP_IO
 150 /* Data, registers and alternate blocks are at the same offset */
 151 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0100)
 152 #define CONFIG_SYS_ATA_REG_OFFSET       (0x0100)
 153 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x0100)
 154 /* Each 8-bit ATA register is aligned to a 4-bytes address */
 155 #define CONFIG_SYS_ATA_STRIDE           4
 156 /* Controller supports 48-bits LBA addressing */
 157 #define CONFIG_LBA48
 158 /* A single bus, a single device */
 159 #define CONFIG_SYS_IDE_MAXBUS           1
 160 #define CONFIG_SYS_IDE_MAXDEVICE        1
 161 /* ATA registers base is at SATA controller base */
 162 #define CONFIG_SYS_ATA_BASE_ADDR        ORION5X_SATA_BASE
 163 /* ATA bus 0 is orion5x port 1 on ED Mini V2 */
 164 #define CONFIG_SYS_ATA_IDE0_OFFSET      ORION5X_SATA_PORT1_OFFSET
 165 /* end of IDE defines */
 166 #endif /* CMD_IDE */
 167
 168 /*
 169  * Common USB/EHCI configuration
 170  */
 171 #ifdef CONFIG_CMD_USB
 172 #define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
 173 #define CONFIG_SUPPORT_VFAT
 174 #endif /* CONFIG_CMD_USB */
 175
 176 /*
 177  * I2C related stuff
 178  */
 179 #ifdef CONFIG_CMD_I2C
 180 #define CONFIG_SYS_I2C
 181 #define CONFIG_SYS_I2C_MVTWSI
 182 #define CONFIG_I2C_MVTWSI_BASE0         ORION5X_TWSI_BASE
 183 #define CONFIG_SYS_I2C_SLAVE            0x0
 184 #define CONFIG_SYS_I2C_SPEED            100000
 185 #endif
 186
 187 /*
 188  *  Environment variables configurations
 189  */
 190 #define CONFIG_ENV_SECT_SIZE            0x2000  /* 16K */
 191 #define CONFIG_ENV_SIZE                 0x2000
 192 #define CONFIG_ENV_OFFSET               0x4000  /* env starts here */
 193
 194 /*
 195  * Size of malloc() pool
 196  */
 197 #define CONFIG_SYS_MALLOC_LEN   (1024 * 256) /* 256kB for malloc() */
 198
 199 /*
 200  * Other required minimal configurations
 201  */
 202 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
 203 #define CONFIG_NR_DRAM_BANKS            1
 204
 205 #define CONFIG_SYS_LOAD_ADDR            0x00800000
 206 #define CONFIG_SYS_MEMTEST_START        0x00400000
 207 #define CONFIG_SYS_MEMTEST_END          0x007fffff
 208 #define CONFIG_SYS_RESET_ADDRESS        0xffff0000
 209 #define CONFIG_SYS_MAXARGS              16
 210
 211 /* Enable command line editing */
 212 #define CONFIG_CMDLINE_EDITING
 213
 214 /* provide extensive help */
 215 #define CONFIG_SYS_LONGHELP
 216
 217 /* additions for new relocation code, must be added to all boards */
 218 #define CONFIG_SYS_SDRAM_BASE           0
 219 #define CONFIG_SYS_INIT_SP_ADDR \
 220         (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
 221
 222 #endif /* _CONFIG_EDMINIV2_H */