include/configs/edminiv2.h

   1 /*
   2  * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
   3  *
   4  * Based on original Kirkwood support which is
   5  * (C) Copyright 2009
   6  * Marvell Semiconductor <www.marvell.com>
   7  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_EDMINIV2_H
  13 #define _CONFIG_EDMINIV2_H
  14
  15 /* general settings */
  16 #define CONFIG_SYS_GENERIC_BOARD
  17
  18 /*
  19  * SPL
  20  */
  21
  22 #define CONFIG_SPL_FRAMEWORK
  23 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  24 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  25 #define CONFIG_SPL_SERIAL_SUPPORT
  26 #define CONFIG_SPL_NOR_SUPPORT
  27 #define CONFIG_SPL_TEXT_BASE            0xffff0000
  28 #define CONFIG_SPL_MAX_SIZE             0x0000fff0
  29 #define CONFIG_SPL_STACK                0x00020000
  30 #define CONFIG_SPL_BSS_START_ADDR       0x00020000
  31 #define CONFIG_SPL_BSS_MAX_SIZE         0x0001ffff
  32 #define CONFIG_SYS_SPL_MALLOC_START     0x00040000
  33 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x0001ffff
  34 #define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/orion5x/u-boot-spl.lds"
  35 #define CONFIG_SPL_BOARD_INIT
  36 #define CONFIG_SYS_UBOOT_BASE           0xfff90000
  37 #define CONFIG_SYS_UBOOT_START          0x00800000
  38 #define CONFIG_SYS_TEXT_BASE            0x00800000
  39
  40 /*
  41  * Version number information
  42  */
  43
  44 #define CONFIG_IDENT_STRING     " EDMiniV2"
  45
  46 /*
  47  * High Level Configuration Options (easy to change)
  48  */
  49
  50 #define CONFIG_MARVELL          1
  51 #define CONFIG_FEROCEON         1       /* CPU Core subversion */
  52 #define CONFIG_88F5182          1       /* SOC Name */
  53 #define CONFIG_MACH_EDMINIV2    1       /* Machine type */
  54
  55 #include <asm/arch/orion5x.h>
  56 /*
  57  * CLKs configurations
  58  */
  59
  60 /*
  61  * Board-specific values for Orion5x MPP low level init:
  62  * - MPPs 12 to 15 are SATA LEDs (mode 5)
  63  * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for
  64  *   MPP16 to MPP19, mode 0 for others
  65  */
  66
  67 #define ORION5X_MPP0_7          0x00000003
  68 #define ORION5X_MPP8_15         0x55550000
  69 #define ORION5X_MPP16_23        0x00005555
  70
  71 /*
  72  * Board-specific values for Orion5x GPIO low level init:
  73  * - GPIO3 is input (RTC interrupt)
  74  * - GPIO16 is Power LED control (0 = on, 1 = off)
  75  * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
  76  * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
  77  * - GPIO19 is SATA disk power toggle (toggles on 0-to-1)
  78  * - GPIO22 is SATA disk power status ()
  79  * - GPIO23 is supply status for SATA disk ()
  80  * - GPIO24 is supply control for board (write 1 to power off)
  81  * Last GPIO is 25, further bits are supposed to be 0.
  82  * Enable mask has ones for INPUT, 0 for OUTPUT.
  83  * Default is LED ON, board ON :)
  84  */
  85
  86 #define ORION5X_GPIO_OUT_ENABLE         0xfef4f0ca
  87 #define ORION5X_GPIO_OUT_VALUE          0x00000000
  88 #define ORION5X_GPIO_IN_POLARITY        0x000000d0
  89
  90 /*
  91  * NS16550 Configuration
  92  */
  93
  94 #define CONFIG_SYS_NS16550
  95 #define CONFIG_SYS_NS16550_SERIAL
  96 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  97 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
  98 #define CONFIG_SYS_NS16550_COM1         ORION5X_UART0_BASE
  99
 100 /*
 101  * Serial Port configuration
 102  * The following definitions let you select what serial you want to use
 103  * for your console driver.
 104  */
 105
 106 #define CONFIG_CONS_INDEX       1       /*Console on UART0 */
 107 #define CONFIG_BAUDRATE                 115200
 108 #define CONFIG_SYS_BAUDRATE_TABLE \
 109         { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
 110
 111 /*
 112  * FLASH configuration
 113  */
 114
 115 #define CONFIG_SYS_FLASH_CFI
 116 #define CONFIG_FLASH_CFI_DRIVER
 117 #define CONFIG_SYS_MAX_FLASH_BANKS      1  /* max num of flash banks       */
 118 #define CONFIG_SYS_MAX_FLASH_SECT       11 /* max num of sects on one chip */
 119 #define CONFIG_SYS_FLASH_BASE           0xfff80000
 120
 121 /* auto boot */
 122 #define CONFIG_BOOTDELAY        3       /* default enable autoboot */
 123
 124 /*
 125  * For booting Linux, the board info and command line data
 126  * have to be in the first 8 MB of memory, since this is
 127  * the maximum mapped by the Linux kernel during initialization.
 128  */
 129 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs  */
 130 #define CONFIG_INITRD_TAG       1       /* enable INITRD tag */
 131 #define CONFIG_SETUP_MEMORY_TAGS 1      /* enable memory tag */
 132
 133 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
 134 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 135                 +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
 136 /*
 137  * Commands configuration
 138  */
 139 #define CONFIG_CMD_IDE
 140 #define CONFIG_CMD_I2C
 141 #define CONFIG_CMD_USB
 142
 143 /*
 144  * Network
 145  */
 146
 147 #ifdef CONFIG_CMD_NET
 148 #define CONFIG_MVGBE                            /* Enable Marvell GbE Driver */
 149 #define CONFIG_MVGBE_PORTS      {1}             /* enable port 0 only */
 150 #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION     /* don't randomize MAC */
 151 #define CONFIG_PHY_BASE_ADR     0x8
 152 #define CONFIG_RESET_PHY_R      /* use reset_phy() to init mv8831116 PHY */
 153 #define CONFIG_NETCONSOLE       /* include NetConsole support   */
 154 #define CONFIG_MII              /* expose smi ove miiphy interface */
 155 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
 156 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
 157 #endif
 158
 159 /*
 160  * IDE
 161  */
 162 #ifdef CONFIG_CMD_IDE
 163 #define __io
 164 #define CONFIG_IDE_PREINIT
 165 #define CONFIG_DOS_PARTITION
 166 #define CONFIG_CMD_EXT2
 167 /* ED Mini V has an IDE-compatible SATA connector for port 1 */
 168 #define CONFIG_MVSATA_IDE
 169 #define CONFIG_MVSATA_IDE_USE_PORT1
 170 /* Needs byte-swapping for ATA data register */
 171 #define CONFIG_IDE_SWAP_IO
 172 /* Data, registers and alternate blocks are at the same offset */
 173 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0100)
 174 #define CONFIG_SYS_ATA_REG_OFFSET       (0x0100)
 175 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x0100)
 176 /* Each 8-bit ATA register is aligned to a 4-bytes address */
 177 #define CONFIG_SYS_ATA_STRIDE           4
 178 /* Controller supports 48-bits LBA addressing */
 179 #define CONFIG_LBA48
 180 /* A single bus, a single device */
 181 #define CONFIG_SYS_IDE_MAXBUS           1
 182 #define CONFIG_SYS_IDE_MAXDEVICE        1
 183 /* ATA registers base is at SATA controller base */
 184 #define CONFIG_SYS_ATA_BASE_ADDR        ORION5X_SATA_BASE
 185 /* ATA bus 0 is orion5x port 1 on ED Mini V2 */
 186 #define CONFIG_SYS_ATA_IDE0_OFFSET      ORION5X_SATA_PORT1_OFFSET
 187 /* end of IDE defines */
 188 #endif /* CMD_IDE */
 189
 190 /*
 191  * Common USB/EHCI configuration
 192  */
 193 #ifdef CONFIG_CMD_USB
 194 #define CONFIG_USB_EHCI         /* Enable EHCI USB support */
 195 #define CONFIG_USB_EHCI_MARVELL
 196 #define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
 197 #define CONFIG_USB_STORAGE
 198 #define CONFIG_DOS_PARTITION
 199 #define CONFIG_ISO_PARTITION
 200 #define CONFIG_SUPPORT_VFAT
 201 #endif /* CONFIG_CMD_USB */
 202
 203 /*
 204  * I2C related stuff
 205  */
 206 #ifdef CONFIG_CMD_I2C
 207 #define CONFIG_SYS_I2C
 208 #define CONFIG_SYS_I2C_MVTWSI
 209 #define CONFIG_I2C_MVTWSI_BASE0         ORION5X_TWSI_BASE
 210 #define CONFIG_SYS_I2C_SLAVE            0x0
 211 #define CONFIG_SYS_I2C_SPEED            100000
 212 #endif
 213
 214 /*
 215  *  Environment variables configurations
 216  */
 217 #define CONFIG_ENV_IS_IN_FLASH          1
 218 #define CONFIG_ENV_SECT_SIZE            0x2000  /* 16K */
 219 #define CONFIG_ENV_SIZE                 0x2000
 220 #define CONFIG_ENV_OFFSET               0x4000  /* env starts here */
 221
 222 /*
 223  * Size of malloc() pool
 224  */
 225 #define CONFIG_SYS_MALLOC_LEN   (1024 * 256) /* 256kB for malloc() */
 226
 227 /*
 228  * Other required minimal configurations
 229  */
 230 #define CONFIG_CONSOLE_INFO_QUIET       /* some code reduction */
 231 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
 232 #define CONFIG_ARCH_MISC_INIT           /* call arch_misc_init() */
 233 #define CONFIG_DISPLAY_CPUINFO          /* Display cpu info */
 234 #define CONFIG_NR_DRAM_BANKS            1
 235
 236 #define CONFIG_SYS_LOAD_ADDR            0x00800000
 237 #define CONFIG_SYS_MEMTEST_START        0x00400000
 238 #define CONFIG_SYS_MEMTEST_END          0x007fffff
 239 #define CONFIG_SYS_RESET_ADDRESS        0xffff0000
 240 #define CONFIG_SYS_MAXARGS              16
 241
 242 /* Use the HUSH parser */
 243 #define CONFIG_SYS_HUSH_PARSER
 244
 245 /* Enable command line editing */
 246 #define CONFIG_CMDLINE_EDITING
 247
 248 /* provide extensive help */
 249 #define CONFIG_SYS_LONGHELP
 250
 251 /* additions for new relocation code, must be added to all boards */
 252 #define CONFIG_SYS_SDRAM_BASE           0
 253 #define CONFIG_SYS_INIT_SP_ADDR \
 254         (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
 255
 256 #endif /* _CONFIG_EDMINIV2_H */