include/configs/embestmx6boards.h

   1 /*
   2  * Copyright (C) 2014 Eukréa Electromatique
   3  * Author: Eric Bénard <eric@eukrea.com>
   4  *
   5  * Configuration settings for the Embest RIoTboard
   6  *
   7  * based on mx6*sabre*.h which are :
   8  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __RIOTBOARD_CONFIG_H
  14 #define __RIOTBOARD_CONFIG_H
  15
  16 #define CONFIG_MXC_UART_BASE            UART2_BASE
  17 #define CONFIG_CONSOLE_DEV              "ttymxc1"
  18 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"
  19
  20 #define PHYS_SDRAM_SIZE         (1u * 1024 * 1024 * 1024)
  21
  22 #define CONFIG_IMX_THERMAL
  23
  24 /* Size of malloc() pool */
  25 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  26
  27 #define CONFIG_BOARD_EARLY_INIT_F
  28 #define CONFIG_BOARD_LATE_INIT
  29
  30 #define CONFIG_MXC_UART
  31
  32 /* I2C Configs */
  33 #define CONFIG_SYS_I2C
  34 #define CONFIG_SYS_I2C_MXC
  35 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  36 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  37 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  38 #define CONFIG_SYS_I2C_SPEED            100000
  39
  40 /* USB Configs */
  41 #define CONFIG_USB_EHCI
  42 #define CONFIG_USB_EHCI_MX6
  43 #define CONFIG_USB_STORAGE
  44 #define CONFIG_USB_HOST_ETHER
  45 #define CONFIG_USB_ETHER_ASIX
  46 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  47 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  48 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  49 #define CONFIG_MXC_USB_FLAGS    0
  50
  51 /* MMC Configs */
  52 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  53
  54 #define CONFIG_FEC_MXC
  55 #define CONFIG_MII
  56 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  57 #define CONFIG_FEC_XCV_TYPE             RGMII
  58 #define CONFIG_ETHPRIME                 "FEC"
  59 #define CONFIG_FEC_MXC_PHYADDR          4
  60
  61 #define CONFIG_PHYLIB
  62 #define CONFIG_PHY_ATHEROS
  63
  64 #ifdef CONFIG_CMD_SF
  65 #define CONFIG_MXC_SPI
  66 #define CONFIG_SF_DEFAULT_BUS           0
  67 #define CONFIG_SF_DEFAULT_CS            0
  68 #define CONFIG_SF_DEFAULT_SPEED         20000000
  69 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  70 #endif
  71
  72 #define CONFIG_CMD_BMODE
  73
  74 #define CONFIG_ARP_TIMEOUT     200UL
  75
  76 /* Print Buffer Size */
  77 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  78
  79 #define CONFIG_SYS_MEMTEST_START       0x10000000
  80 #define CONFIG_SYS_MEMTEST_END         0x10010000
  81 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
  82
  83 #define CONFIG_STACKSIZE               (128 * 1024)
  84
  85 /* Physical Memory Map */
  86 #define CONFIG_NR_DRAM_BANKS           1
  87 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
  88
  89 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
  90 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  91 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
  92
  93 #define CONFIG_SYS_INIT_SP_OFFSET \
  94         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  95 #define CONFIG_SYS_INIT_SP_ADDR \
  96         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  97
  98 /* Environment organization */
  99 #define CONFIG_ENV_SIZE                 (8 * 1024)
 100
 101 #if defined(CONFIG_ENV_IS_IN_MMC)
 102 /* RiOTboard */
 103 #define CONFIG_FDTFILE  "imx6dl-riotboard.dtb"
 104 #define CONFIG_SYS_FSL_USDHC_NUM        3
 105 #define CONFIG_SYS_MMC_ENV_DEV          2       /* SDHC4 */
 106 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 107 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 108 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 109 /* MarSBoard */
 110 #define CONFIG_FDTFILE  "imx6q-marsboard.dtb"
 111 #define CONFIG_SYS_FSL_USDHC_NUM        2
 112 #define CONFIG_ENV_OFFSET               (768 * 1024)
 113 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 114 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 115 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 116 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 117 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 118 #endif
 119
 120 /* Framebuffer */
 121 #define CONFIG_VIDEO
 122 #define CONFIG_VIDEO_IPUV3
 123 #define CONFIG_CFB_CONSOLE
 124 #define CONFIG_VGA_AS_SINGLE_DEVICE
 125 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 126 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 127 #define CONFIG_VIDEO_BMP_RLE8
 128 #define CONFIG_SPLASH_SCREEN
 129 #define CONFIG_SPLASH_SCREEN_ALIGN
 130 #define CONFIG_BMP_16BPP
 131 #define CONFIG_VIDEO_LOGO
 132 #define CONFIG_VIDEO_BMP_LOGO
 133 #define CONFIG_IPUV3_CLK 260000000
 134 #define CONFIG_IMX_HDMI
 135 #define CONFIG_IMX_VIDEO_SKIP
 136
 137 #include <config_distro_defaults.h>
 138 #include "mx6_common.h"
 139
 140 /* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 141  * 1M script, 1M pxe and the ramdisk at the end */
 142 #define MEM_LAYOUT_ENV_SETTINGS \
 143         "bootm_size=0x10000000\0" \
 144         "kernel_addr_r=0x12000000\0" \
 145         "fdt_addr_r=0x13000000\0" \
 146         "scriptaddr=0x13100000\0" \
 147         "pxefile_addr_r=0x13200000\0" \
 148         "ramdisk_addr_r=0x13300000\0"
 149
 150 #define BOOT_TARGET_DEVICES(func) \
 151         func(MMC, mmc, 0) \
 152         func(MMC, mmc, 1) \
 153         func(MMC, mmc, 2) \
 154         func(USB, usb, 0) \
 155         func(PXE, pxe, na) \
 156         func(DHCP, dhcp, na)
 157
 158 #include <config_distro_bootcmd.h>
 159
 160 #define CONSOLE_STDIN_SETTINGS \
 161         "stdin=serial\0"
 162
 163 #define CONSOLE_STDOUT_SETTINGS \
 164         "stdout=serial\0" \
 165         "stderr=serial\0"
 166
 167 #define CONSOLE_ENV_SETTINGS \
 168         CONSOLE_STDIN_SETTINGS \
 169         CONSOLE_STDOUT_SETTINGS
 170
 171 #define CONFIG_EXTRA_ENV_SETTINGS \
 172         CONSOLE_ENV_SETTINGS \
 173         MEM_LAYOUT_ENV_SETTINGS \
 174         "fdtfile=" CONFIG_FDTFILE "\0" \
 175         BOOTENV
 176
 177 #endif                         /* __RIOTBOARD_CONFIG_H */