include/configs/ethernut5.h

   1 /*
   2  * (C) Copyright 2011
   3  * egnite GmbH <info@egnite.de>
   4  *
   5  * Configuation settings for Ethernut 5 with AT91SAM9XE.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <asm/hardware.h>
  14
  15 #define CONFIG_SYS_GENERIC_BOARD
  16
  17 /* The first stage boot loader expects u-boot running at this address. */
  18 #define CONFIG_SYS_TEXT_BASE    0x27000000      /* 16MB available */
  19
  20 /* The first stage boot loader takes care of low level initialization. */
  21 #define CONFIG_SKIP_LOWLEVEL_INIT
  22
  23 /* Set our official architecture number. */
  24 #define MACH_TYPE_ETHERNUT5 1971
  25 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
  26
  27 /* CPU information */
  28 #define CONFIG_DISPLAY_CPUINFO          /* Display at console. */
  29 #define CONFIG_ARCH_CPU_INIT
  30
  31 /* ARM asynchronous clock */
  32 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768   /* slow clock xtal */
  33 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000 /* 18.432 MHz crystal */
  34
  35 /* 32kB internal SRAM */
  36 #define CONFIG_SRAM_BASE        0x00300000 /*AT91SAM9XE_SRAM_BASE */
  37 #define CONFIG_SRAM_SIZE        (32 << 10)
  38 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \
  39                                 GENERATED_GBL_DATA_SIZE)
  40
  41 /* 128MB SDRAM in 1 bank */
  42 #define CONFIG_NR_DRAM_BANKS            1
  43 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  44 #define CONFIG_SYS_SDRAM_SIZE           (128 << 20)
  45 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_SDRAM_BASE
  46 #define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
  47 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (1 << 20))
  48 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  49 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_TEXT_BASE \
  50                                         - CONFIG_SYS_MALLOC_LEN)
  51
  52 /* 512kB on-chip NOR flash */
  53 # define CONFIG_SYS_MAX_FLASH_BANKS     1
  54 # define CONFIG_SYS_FLASH_BASE          0x00200000 /* AT91SAM9XE_FLASH_BASE */
  55 # define CONFIG_AT91_EFLASH
  56 # define CONFIG_SYS_MAX_FLASH_SECT      32
  57 # define CONFIG_SYS_FLASH_PROTECTION    /* First stage loader in sector 0 */
  58 # define CONFIG_EFLASH_PROTSECTORS      1
  59
  60 /* 512kB DataFlash at NPCS0 */
  61 #define CONFIG_SYS_MAX_DATAFLASH_BANKS  1
  62 #define CONFIG_HAS_DATAFLASH
  63 #define CONFIG_SPI_FLASH
  64 #define CONFIG_SPI_FLASH_ATMEL
  65 #define CONFIG_ATMEL_DATAFLASH_SPI
  66 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000
  67 #define DATAFLASH_TCSS                  (0x1a << 16)
  68 #define DATAFLASH_TCHS                  (0x1 << 24)
  69
  70 #define CONFIG_ENV_IS_IN_SPI_FLASH
  71 #define CONFIG_ENV_OFFSET               0x3DE000
  72 #define CONFIG_ENV_SECT_SIZE            (132 << 10)
  73 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
  74 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \
  75                                         + CONFIG_ENV_OFFSET)
  76 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \
  77                                         + 0x042000)
  78
  79 /* SPI */
  80 #define CONFIG_ATMEL_SPI
  81 #define CONFIG_SYS_SPI_WRITE_TOUT       (5 * CONFIG_SYS_HZ)
  82 #define AT91_SPI_CLK                    15000000
  83
  84 /* Serial port */
  85 #define CONFIG_ATMEL_USART
  86 #define CONFIG_USART3                   /* USART 3 is DBGU */
  87 #define CONFIG_BAUDRATE                 115200
  88 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  89 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  90
  91 /* Misc. hardware drivers */
  92 #define CONFIG_AT91_GPIO
  93
  94 /* Command line configuration */
  95 #include <config_cmd_default.h>
  96 #undef CONFIG_CMD_BDI
  97 #undef CONFIG_CMD_FPGA
  98 #undef CONFIG_CMD_LOADS
  99
 100 #define CONFIG_CMD_JFFS2
 101 #define CONFIG_CMD_MII
 102 #define CONFIG_CMD_MTDPARTS
 103 #define CONFIG_CMD_NAND
 104 #define CONFIG_CMD_SPI
 105
 106 #ifdef MINIMAL_LOADER
 107 #undef CONFIG_CMD_CONSOLE
 108 #undef CONFIG_CMD_EDITENV
 109 #undef CONFIG_CMD_IMI
 110 #undef CONFIG_CMD_ITEST
 111 #undef CONFIG_CMD_IMLS
 112 #undef CONFIG_CMD_LOADB
 113 #undef CONFIG_CMD_LOADS
 114 #undef CONFIG_CMD_NFS
 115 #undef CONFIG_CMD_SETGETDCR
 116 #undef CONFIG_CMD_XIMG
 117 #else
 118 #define CONFIG_CMD_ASKENV
 119 #define CONFIG_CMD_BSP
 120 #define CONFIG_CMD_CACHE
 121 #define CONFIG_CMD_CDP
 122 #define CONFIG_CMD_DATE
 123 #define CONFIG_CMD_DHCP
 124 #define CONFIG_CMD_DNS
 125 #define CONFIG_CMD_EXT2
 126 #define CONFIG_CMD_FAT
 127 #define CONFIG_CMD_I2C
 128 #define CONFIG_CMD_MMC
 129 #define CONFIG_CMD_PING
 130 #define CONFIG_CMD_RARP
 131 #define CONFIG_CMD_REISER
 132 #define CONFIG_CMD_SAVES
 133 #define CONFIG_CMD_SETEXPR
 134 #define CONFIG_CMD_SF
 135 #define CONFIG_CMD_SNTP
 136 #define CONFIG_CMD_UBI
 137 #define CONFIG_CMD_UBIFS
 138 #define CONFIG_CMD_UNZIP
 139 #define CONFIG_CMD_USB
 140 #endif
 141
 142 /* NAND flash */
 143 #ifdef CONFIG_CMD_NAND
 144 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 145 #define CONFIG_SYS_NAND_BASE            0x40000000
 146 #define CONFIG_SYS_NAND_DBW_8
 147 #define CONFIG_NAND_ATMEL
 148 /* our ALE is AD21 */
 149 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
 150 /* our CLE is AD22 */
 151 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
 152 #define CONFIG_SYS_NAND_ENABLE_PIN      GPIO_PIN_PC(14)
 153 #endif
 154
 155 /* JFFS2 */
 156 #ifdef CONFIG_CMD_JFFS2
 157 #define CONFIG_MTD_NAND_ECC_JFFS2
 158 #define CONFIG_JFFS2_CMDLINE
 159 #define CONFIG_JFFS2_NAND
 160 #endif
 161
 162 /* Ethernet */
 163 #define CONFIG_NET_RETRY_COUNT          20
 164 #define CONFIG_MACB
 165 #define CONFIG_RMII
 166 #define CONFIG_PHY_ID                   0
 167 #define CONFIG_MACB_SEARCH_PHY
 168
 169 /* MMC */
 170 #ifdef CONFIG_CMD_MMC
 171 #define CONFIG_MMC
 172 #define CONFIG_GENERIC_MMC
 173 #define CONFIG_GENERIC_ATMEL_MCI
 174 #define CONFIG_SYS_MMC_CD_PIN           AT91_PIO_PORTC, 8
 175 #endif
 176
 177 /* USB */
 178 #ifdef CONFIG_CMD_USB
 179 #define CONFIG_USB_ATMEL
 180 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 181 #define CONFIG_USB_OHCI_NEW
 182 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 183 #define CONFIG_SYS_USB_OHCI_REGS_BASE   0x00500000
 184 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "host"
 185 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 186 #define CONFIG_USB_STORAGE
 187 #endif
 188
 189 /* RTC */
 190 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP)
 191 #define CONFIG_RTC_PCF8563
 192 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 193 #endif
 194
 195 /* I2C */
 196 #define CONFIG_SYS_MAX_I2C_BUS  1
 197
 198 #define CONFIG_SYS_I2C
 199 #define CONFIG_SYS_I2C_SOFT                     /* I2C bit-banged */
 200 #define CONFIG_SYS_I2C_SOFT_SPEED       100000
 201 #define CONFIG_SYS_I2C_SOFT_SLAVE       0
 202
 203 #define I2C_SOFT_DECLARATIONS
 204
 205 #define GPIO_I2C_SCL            AT91_PIO_PORTA, 24
 206 #define GPIO_I2C_SDA            AT91_PIO_PORTA, 23
 207
 208 #define I2C_INIT { \
 209         at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \
 210         at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \
 211         at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \
 212         at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \
 213         at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \
 214 }
 215
 216 #define I2C_ACTIVE      at91_set_pio_output(AT91_PIO_PORTA, 23, 0)
 217 #define I2C_TRISTATE    at91_set_pio_input(AT91_PIO_PORTA, 23, 0)
 218 #define I2C_SCL(bit)    at91_set_pio_value(AT91_PIO_PORTA, 24, bit)
 219 #define I2C_SDA(bit)    at91_set_pio_value(AT91_PIO_PORTA, 23, bit)
 220 #define I2C_DELAY       udelay(100)
 221 #define I2C_READ        at91_get_pio_value(AT91_PIO_PORTA, 23)
 222
 223 /* DHCP/BOOTP options */
 224 #ifdef CONFIG_CMD_DHCP
 225 #define CONFIG_BOOTP_BOOTFILESIZE
 226 #define CONFIG_BOOTP_BOOTPATH
 227 #define CONFIG_BOOTP_GATEWAY
 228 #define CONFIG_BOOTP_HOSTNAME
 229 #define CONFIG_SYS_AUTOLOAD     "n"
 230 #endif
 231
 232 /* File systems */
 233 #define CONFIG_MTD_DEVICE
 234 #define CONFIG_MTD_PARTITIONS
 235 #if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND)
 236 #define MTDIDS_DEFAULT          "nand0=atmel_nand"
 237 #define MTDPARTS_DEFAULT        "mtdparts=atmel_nand:-(root)"
 238 #endif
 239 #if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \
 240         defined(CONFIG_CMD_USB) || defined(CONFIG_MMC)
 241 #define CONFIG_DOS_PARTITION
 242 #endif
 243 #define CONFIG_LZO
 244 #define CONFIG_RBTREE
 245
 246 /* Boot command */
 247 #define CONFIG_BOOTDELAY        3
 248 #define CONFIG_CMDLINE_TAG
 249 #define CONFIG_SETUP_MEMORY_TAGS
 250 #define CONFIG_INITRD_TAG
 251 #define CONFIG_BOOTCOMMAND      "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm"
 252 #if defined(CONFIG_CMD_NAND)
 253 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
 254                                 "root=/dev/mtdblock0 " \
 255                                 MTDPARTS_DEFAULT \
 256                                 " rw rootfstype=jffs2"
 257 #endif
 258
 259 /* Misc. u-boot settings */
 260 #define CONFIG_SYS_PROMPT               "U-Boot> "
 261 #define CONFIG_SYS_HUSH_PARSER
 262 #define CONFIG_SYS_CBSIZE               256
 263 #define CONFIG_SYS_MAXARGS              16
 264 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + 16 \
 265                                         + sizeof(CONFIG_SYS_PROMPT))
 266 #define CONFIG_SYS_LONGHELP
 267 #define CONFIG_CMDLINE_EDITING
 268
 269 #endif