include/configs/gdppc440etx.h

   1 /*
   2  * (C) Copyright 2008
   3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
   4  *
   5  * Based on include/configs/yosemite.h
   6  * (C) Copyright 2005-2007
   7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8  *
   9  * See file CREDITS for list of people who contributed to this
  10  * project.
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License as
  14  * published by the Free Software Foundation; either version 2 of
  15  * the License, or (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  25  * MA 02111-1307 USA
  26  */
  27
  28 /*
  29  * gdppc440etx.h - configuration for G&D 440EP/GR ETX-Module
  30  */
  31 #ifndef __CONFIG_H
  32 #define __CONFIG_H
  33
  34 /*
  35  * High Level Configuration Options
  36  */
  37 #define CONFIG_440GR            1               /* Specific PPC440GR support */
  38 #define CONFIG_HOSTNAME         gdppc440etx
  39 #define CONFIG_440              1               /* ... PPC440 family         */
  40 #define CONFIG_4xx              1               /* ... PPC4xx family         */
  41 #define CONFIG_SYS_CLK_FREQ     66666666        /* external freq to pll      */
  42
  43 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
  44
  45 /*
  46  * Include common defines/options for all AMCC eval boards
  47  */
  48 #include "amcc-common.h"
  49
  50 #define CONFIG_BOARD_EARLY_INIT_F       1       /* call board_early_init_f*/
  51 #define CONFIG_MISC_INIT_R              1       /* call misc_init_r()     */
  52
  53 /*
  54  * Base addresses -- Note these are effective addresses where the
  55  * actual resources get mapped (not physical addresses)
  56  */
  57 #define CONFIG_SYS_FLASH_BASE           0xfc000000      /* start of FLASH    */
  58 #define CONFIG_SYS_PCI_MEMBASE          0xa0000000      /* mapped pci memory */
  59 #define CONFIG_SYS_PCI_MEMBASE1         CONFIG_SYS_PCI_MEMBASE  + 0x10000000
  60 #define CONFIG_SYS_PCI_MEMBASE2         CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
  61 #define CONFIG_SYS_PCI_MEMBASE3         CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
  62
  63 /*Don't change either of these*/
  64 #define CONFIG_SYS_PCI_BASE             0xe0000000      /* internal PCI regs */
  65 /*Don't change either of these*/
  66
  67 #define CONFIG_SYS_USB_DEVICE           0x50000000
  68 #define CONFIG_SYS_BOOT_BASE_ADDR       0xf0000000
  69
  70 /*
  71  * Initial RAM & stack pointer (placed in SDRAM)
  72  */
  73 #define CONFIG_SYS_INIT_RAM_DCACHE      1               /* d-cache as init ram*/
  74 #define CONFIG_SYS_INIT_RAM_ADDR        0x70000000      /* DCache             */
  75 #define CONFIG_SYS_INIT_RAM_SIZE                (4 << 10)
  76 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
  77                                          - GENERATED_GBL_DATA_SIZE)
  78 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  79
  80 /*
  81  * Serial Port
  82  */
  83 #define CONFIG_CONS_INDEX       2       /* Use UART1                    */
  84 #define CONFIG_SYS_NS16550
  85 #define CONFIG_SYS_NS16550_SERIAL
  86 #define CONFIG_SYS_NS16550_REG_SIZE     1
  87 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
  88 #define CONFIG_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk */
  89
  90 /*
  91  * Environment
  92  * Define here the location of the environment variables (FLASH or EEPROM).
  93  * Note: DENX encourages to use redundant environment in FLASH.
  94  */
  95 #define CONFIG_ENV_IS_IN_FLASH          1               /* FLASH for env. vars*/
  96
  97 /*
  98  * FLASH related
  99  */
 100 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible*/
 101 #define CONFIG_FLASH_CFI_DRIVER                 /* Use common CFI driver      */
 102 #define CONFIG_SYS_FLASH_CFI_AMD_RESET  1       /* AMD RESET for STM 29W320DB!*/
 103
 104 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 105 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors/chip */
 106
 107 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout/Flash Erase (in ms)*/
 108 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout/Flash Write (in ms)*/
 109
 110 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1/* use buffered writes (20x faster)*/
 111
 112 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
 113
 114 #ifdef CONFIG_ENV_IS_IN_FLASH
 115 #define CONFIG_ENV_SECT_SIZE            0x20000 /* size of one complete sector*/
 116 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
 117 #define CONFIG_ENV_SIZE                 0x2000 /* Total Size of Env. Sector */
 118
 119 /* Address and size of Redundant Environment Sector */
 120 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 121 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
 122 #endif /* CONFIG_ENV_IS_IN_FLASH */
 123
 124 /*
 125  * DDR SDRAM
 126  */
 127 #undef CONFIG_SPD_EEPROM                /* Don't use SPD EEPROM for setup*/
 128 #define CONFIG_SYS_KBYTES_SDRAM         (128 * 1024)    /* 128MB         */
 129 #define CONFIG_SYS_SDRAM_BANKS          (2)
 130
 131 #define CONFIG_SDRAM_BANK0
 132 #define CONFIG_SDRAM_BANK1
 133
 134 #define CONFIG_SYS_SDRAM0_TR0           0x410a4012
 135 #define CONFIG_SYS_SDRAM0_WDDCTR        0x40000000
 136 #define CONFIG_SYS_SDRAM0_RTR           0x04080000
 137 #define CONFIG_SYS_SDRAM0_CFG0          0x80000000
 138
 139 #undef CONFIG_SDRAM_ECC
 140
 141 /*
 142  * I2C
 143  */
 144 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed+slave address*/
 145
 146 /*
 147  * Default environment variables
 148  */
 149 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 150         CONFIG_AMCC_DEF_ENV                                             \
 151         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 152         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 153         "kernel_addr=fc000000\0"                                        \
 154         "ramdisk_addr=fc180000\0"                                       \
 155         ""
 156
 157 #define CONFIG_HAS_ETH1                 1       /* add support for "eth1addr" */
 158 #define CONFIG_PHY_ADDR                 1
 159 #define CONFIG_PHY1_ADDR                3
 160
 161 #ifdef DEBUG
 162 #define CONFIG_PANIC_HANG
 163 #endif
 164
 165 /*
 166  * Commands additional to the ones defined in amcc-common.h
 167  */
 168 #define CONFIG_CMD_PCI
 169 #undef CONFIG_CMD_EEPROM
 170
 171 /*
 172  * PCI stuff
 173  */
 174
 175 /* General PCI */
 176 #define CONFIG_PCI                              /* include pci support        */
 177 #undef  CONFIG_PCI_PNP                          /* do (not) pci plug-and-play */
 178 #define CONFIG_PCI_SCAN_SHOW                    /* show pci devices on startup*/
 179 #define CONFIG_SYS_PCI_TARGBASE         0x80000000      /* PCIaddr mapped to \
 180                                                         CONFIG_SYS_PCI_MEMBASE*/
 181
 182 /* Board-specific PCI */
 183 #define CONFIG_SYS_PCI_TARGET_INIT
 184 #define CONFIG_SYS_PCI_MASTER_INIT
 185
 186 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x10e8  /* AMCC */
 187 #define CONFIG_SYS_PCI_SUBSYS_ID        0xcafe  /* tbd */
 188
 189 /*
 190  * External Bus Controller (EBC) Setup
 191  */
 192 #define CONFIG_SYS_FLASH                CONFIG_SYS_FLASH_BASE
 193
 194 /* Memory Bank 0 (NOR-FLASH) initialization */
 195 #define CONFIG_SYS_EBC_PB0AP            0x03017200
 196 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_FLASH | 0xda000)
 197
 198 #endif  /* __CONFIG_H */