include/configs/gdppc440etx.h

   1 /*
   2  * (C) Copyright 2008
   3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
   4  *
   5  * Based on include/configs/yosemite.h
   6  * (C) Copyright 2005-2007
   7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 /*
  13  * gdppc440etx.h - configuration for G&D 440EP/GR ETX-Module
  14  */
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 /*
  19  * High Level Configuration Options
  20  */
  21 #define CONFIG_440GR            1               /* Specific PPC440GR support */
  22 #define CONFIG_HOSTNAME         gdppc440etx
  23 #define CONFIG_440              1               /* ... PPC440 family         */
  24 #define CONFIG_SYS_CLK_FREQ     66666666        /* external freq to pll      */
  25
  26 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
  27
  28 /*
  29  * Include common defines/options for all AMCC eval boards
  30  */
  31 #include "amcc-common.h"
  32
  33 #define CONFIG_BOARD_EARLY_INIT_F       1       /* call board_early_init_f*/
  34 #define CONFIG_MISC_INIT_R              1       /* call misc_init_r()     */
  35 #define CONFIG_SYS_GENERIC_BOARD
  36
  37 #undef CONFIG_ZERO_BOOTDELAY_CHECK     /* ignore keypress on bootdelay==0 */
  38
  39 /*
  40  * Base addresses -- Note these are effective addresses where the
  41  * actual resources get mapped (not physical addresses)
  42  */
  43 #define CONFIG_SYS_FLASH_BASE           0xfc000000      /* start of FLASH    */
  44 #define CONFIG_SYS_PCI_MEMBASE          0xa0000000      /* mapped pci memory */
  45 #define CONFIG_SYS_PCI_MEMBASE1         CONFIG_SYS_PCI_MEMBASE  + 0x10000000
  46 #define CONFIG_SYS_PCI_MEMBASE2         CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
  47 #define CONFIG_SYS_PCI_MEMBASE3         CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
  48
  49 /*Don't change either of these*/
  50 #define CONFIG_SYS_PCI_BASE             0xe0000000      /* internal PCI regs */
  51 /*Don't change either of these*/
  52
  53 #define CONFIG_SYS_USB_DEVICE           0x50000000
  54 #define CONFIG_SYS_BOOT_BASE_ADDR       0xf0000000
  55
  56 /*
  57  * Initial RAM & stack pointer (placed in SDRAM)
  58  */
  59 #define CONFIG_SYS_INIT_RAM_DCACHE      1               /* d-cache as init ram*/
  60 #define CONFIG_SYS_INIT_RAM_ADDR        0x70000000      /* DCache             */
  61 #define CONFIG_SYS_INIT_RAM_SIZE                (4 << 10)
  62 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
  63                                          - GENERATED_GBL_DATA_SIZE)
  64 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  65
  66 /*
  67  * Serial Port
  68  */
  69 #define CONFIG_CONS_INDEX       2       /* Use UART1                    */
  70 #define CONFIG_SYS_NS16550
  71 #define CONFIG_SYS_NS16550_SERIAL
  72 #define CONFIG_SYS_NS16550_REG_SIZE     1
  73 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
  74 #define CONFIG_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk */
  75
  76 /*
  77  * Environment
  78  * Define here the location of the environment variables (FLASH or EEPROM).
  79  * Note: DENX encourages to use redundant environment in FLASH.
  80  */
  81 #define CONFIG_ENV_IS_IN_FLASH          1               /* FLASH for env. vars*/
  82
  83 /*
  84  * FLASH related
  85  */
  86 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible*/
  87 #define CONFIG_FLASH_CFI_DRIVER                 /* Use common CFI driver      */
  88 #define CONFIG_SYS_FLASH_CFI_AMD_RESET  1       /* AMD RESET for STM 29W320DB!*/
  89
  90 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
  91 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors/chip */
  92
  93 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout/Flash Erase (in ms)*/
  94 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout/Flash Write (in ms)*/
  95
  96 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1/* use buffered writes (20x faster)*/
  97
  98 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
  99
 100 #ifdef CONFIG_ENV_IS_IN_FLASH
 101 #define CONFIG_ENV_SECT_SIZE            0x20000 /* size of one complete sector*/
 102 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
 103 #define CONFIG_ENV_SIZE                 0x2000 /* Total Size of Env. Sector */
 104
 105 /* Address and size of Redundant Environment Sector */
 106 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 107 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
 108 #endif /* CONFIG_ENV_IS_IN_FLASH */
 109
 110 /*
 111  * DDR SDRAM
 112  */
 113 #undef CONFIG_SPD_EEPROM                /* Don't use SPD EEPROM for setup*/
 114 #define CONFIG_SYS_KBYTES_SDRAM         (128 * 1024)    /* 128MB         */
 115 #define CONFIG_SYS_SDRAM_BANKS          (2)
 116
 117 #define CONFIG_SDRAM_BANK0
 118 #define CONFIG_SDRAM_BANK1
 119
 120 #define CONFIG_SYS_SDRAM0_TR0           0x410a4012
 121 #define CONFIG_SYS_SDRAM0_WDDCTR        0x40000000
 122 #define CONFIG_SYS_SDRAM0_RTR           0x04080000
 123 #define CONFIG_SYS_SDRAM0_CFG0          0x80000000
 124
 125 #undef CONFIG_SDRAM_ECC
 126
 127 /*
 128  * I2C
 129  */
 130 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 131
 132 /*
 133  * Default environment variables
 134  */
 135 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 136         CONFIG_AMCC_DEF_ENV                                             \
 137         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 138         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 139         "kernel_addr=fc000000\0"                                        \
 140         "ramdisk_addr=fc180000\0"                                       \
 141         ""
 142
 143 #define CONFIG_HAS_ETH1                 1       /* add support for "eth1addr" */
 144 #define CONFIG_PHY_ADDR                 1
 145 #define CONFIG_PHY1_ADDR                3
 146
 147 #ifdef DEBUG
 148 #define CONFIG_PANIC_HANG
 149 #endif
 150
 151 /*
 152  * Commands additional to the ones defined in amcc-common.h
 153  */
 154 #define CONFIG_CMD_PCI
 155 #undef CONFIG_CMD_EEPROM
 156
 157 /*
 158  * PCI stuff
 159  */
 160
 161 /* General PCI */
 162 #define CONFIG_PCI                              /* include pci support        */
 163 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 164 #undef  CONFIG_PCI_PNP                          /* do (not) pci plug-and-play */
 165 #define CONFIG_PCI_SCAN_SHOW                    /* show pci devices on startup*/
 166 #define CONFIG_SYS_PCI_TARGBASE         0x80000000      /* PCIaddr mapped to \
 167                                                         CONFIG_SYS_PCI_MEMBASE*/
 168
 169 /* Board-specific PCI */
 170 #define CONFIG_SYS_PCI_TARGET_INIT
 171 #define CONFIG_SYS_PCI_MASTER_INIT
 172
 173 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x10e8  /* AMCC */
 174 #define CONFIG_SYS_PCI_SUBSYS_ID        0xcafe  /* tbd */
 175
 176 /*
 177  * External Bus Controller (EBC) Setup
 178  */
 179 #define CONFIG_SYS_FLASH                CONFIG_SYS_FLASH_BASE
 180
 181 /* Memory Bank 0 (NOR-FLASH) initialization */
 182 #define CONFIG_SYS_EBC_PB0AP            0x03017200
 183 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_FLASH | 0xda000)
 184
 185 #endif  /* __CONFIG_H */