include/configs/gdppc440etx.h

   1 /*
   2  * (C) Copyright 2008
   3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
   4  *
   5  * Based on include/configs/yosemite.h
   6  * (C) Copyright 2005-2007
   7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 /*
  13  * gdppc440etx.h - configuration for G&D 440EP/GR ETX-Module
  14  */
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 /*
  19  * High Level Configuration Options
  20  */
  21 #define CONFIG_440GR            1               /* Specific PPC440GR support */
  22 #define CONFIG_HOSTNAME         gdppc440etx
  23 #define CONFIG_440              1               /* ... PPC440 family         */
  24 #define CONFIG_4xx              1               /* ... PPC4xx family         */
  25 #define CONFIG_SYS_CLK_FREQ     66666666        /* external freq to pll      */
  26
  27 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
  28
  29 /*
  30  * Include common defines/options for all AMCC eval boards
  31  */
  32 #include "amcc-common.h"
  33
  34 #define CONFIG_BOARD_EARLY_INIT_F       1       /* call board_early_init_f*/
  35 #define CONFIG_MISC_INIT_R              1       /* call misc_init_r()     */
  36
  37 #undef CONFIG_ZERO_BOOTDELAY_CHECK     /* ignore keypress on bootdelay==0 */
  38 #define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
  39 #define CONFIG_AUTOBOOT_STOP_STR " "
  40
  41 /*
  42  * Base addresses -- Note these are effective addresses where the
  43  * actual resources get mapped (not physical addresses)
  44  */
  45 #define CONFIG_SYS_FLASH_BASE           0xfc000000      /* start of FLASH    */
  46 #define CONFIG_SYS_PCI_MEMBASE          0xa0000000      /* mapped pci memory */
  47 #define CONFIG_SYS_PCI_MEMBASE1         CONFIG_SYS_PCI_MEMBASE  + 0x10000000
  48 #define CONFIG_SYS_PCI_MEMBASE2         CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
  49 #define CONFIG_SYS_PCI_MEMBASE3         CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
  50
  51 /*Don't change either of these*/
  52 #define CONFIG_SYS_PCI_BASE             0xe0000000      /* internal PCI regs */
  53 /*Don't change either of these*/
  54
  55 #define CONFIG_SYS_USB_DEVICE           0x50000000
  56 #define CONFIG_SYS_BOOT_BASE_ADDR       0xf0000000
  57
  58 /*
  59  * Initial RAM & stack pointer (placed in SDRAM)
  60  */
  61 #define CONFIG_SYS_INIT_RAM_DCACHE      1               /* d-cache as init ram*/
  62 #define CONFIG_SYS_INIT_RAM_ADDR        0x70000000      /* DCache             */
  63 #define CONFIG_SYS_INIT_RAM_SIZE                (4 << 10)
  64 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
  65                                          - GENERATED_GBL_DATA_SIZE)
  66 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  67
  68 /*
  69  * Serial Port
  70  */
  71 #define CONFIG_CONS_INDEX       2       /* Use UART1                    */
  72 #define CONFIG_SYS_NS16550
  73 #define CONFIG_SYS_NS16550_SERIAL
  74 #define CONFIG_SYS_NS16550_REG_SIZE     1
  75 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
  76 #define CONFIG_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk */
  77
  78 /*
  79  * Environment
  80  * Define here the location of the environment variables (FLASH or EEPROM).
  81  * Note: DENX encourages to use redundant environment in FLASH.
  82  */
  83 #define CONFIG_ENV_IS_IN_FLASH          1               /* FLASH for env. vars*/
  84
  85 /*
  86  * FLASH related
  87  */
  88 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible*/
  89 #define CONFIG_FLASH_CFI_DRIVER                 /* Use common CFI driver      */
  90 #define CONFIG_SYS_FLASH_CFI_AMD_RESET  1       /* AMD RESET for STM 29W320DB!*/
  91
  92 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
  93 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors/chip */
  94
  95 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout/Flash Erase (in ms)*/
  96 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout/Flash Write (in ms)*/
  97
  98 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1/* use buffered writes (20x faster)*/
  99
 100 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
 101
 102 #ifdef CONFIG_ENV_IS_IN_FLASH
 103 #define CONFIG_ENV_SECT_SIZE            0x20000 /* size of one complete sector*/
 104 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
 105 #define CONFIG_ENV_SIZE                 0x2000 /* Total Size of Env. Sector */
 106
 107 /* Address and size of Redundant Environment Sector */
 108 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 109 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
 110 #endif /* CONFIG_ENV_IS_IN_FLASH */
 111
 112 /*
 113  * DDR SDRAM
 114  */
 115 #undef CONFIG_SPD_EEPROM                /* Don't use SPD EEPROM for setup*/
 116 #define CONFIG_SYS_KBYTES_SDRAM         (128 * 1024)    /* 128MB         */
 117 #define CONFIG_SYS_SDRAM_BANKS          (2)
 118
 119 #define CONFIG_SDRAM_BANK0
 120 #define CONFIG_SDRAM_BANK1
 121
 122 #define CONFIG_SYS_SDRAM0_TR0           0x410a4012
 123 #define CONFIG_SYS_SDRAM0_WDDCTR        0x40000000
 124 #define CONFIG_SYS_SDRAM0_RTR           0x04080000
 125 #define CONFIG_SYS_SDRAM0_CFG0          0x80000000
 126
 127 #undef CONFIG_SDRAM_ECC
 128
 129 /*
 130  * I2C
 131  */
 132 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 133
 134 /*
 135  * Default environment variables
 136  */
 137 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 138         CONFIG_AMCC_DEF_ENV                                             \
 139         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 140         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 141         "kernel_addr=fc000000\0"                                        \
 142         "ramdisk_addr=fc180000\0"                                       \
 143         ""
 144
 145 #define CONFIG_HAS_ETH1                 1       /* add support for "eth1addr" */
 146 #define CONFIG_PHY_ADDR                 1
 147 #define CONFIG_PHY1_ADDR                3
 148
 149 #ifdef DEBUG
 150 #define CONFIG_PANIC_HANG
 151 #endif
 152
 153 /*
 154  * Commands additional to the ones defined in amcc-common.h
 155  */
 156 #define CONFIG_CMD_PCI
 157 #undef CONFIG_CMD_EEPROM
 158
 159 /*
 160  * PCI stuff
 161  */
 162
 163 /* General PCI */
 164 #define CONFIG_PCI                              /* include pci support        */
 165 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 166 #undef  CONFIG_PCI_PNP                          /* do (not) pci plug-and-play */
 167 #define CONFIG_PCI_SCAN_SHOW                    /* show pci devices on startup*/
 168 #define CONFIG_SYS_PCI_TARGBASE         0x80000000      /* PCIaddr mapped to \
 169                                                         CONFIG_SYS_PCI_MEMBASE*/
 170
 171 /* Board-specific PCI */
 172 #define CONFIG_SYS_PCI_TARGET_INIT
 173 #define CONFIG_SYS_PCI_MASTER_INIT
 174
 175 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x10e8  /* AMCC */
 176 #define CONFIG_SYS_PCI_SUBSYS_ID        0xcafe  /* tbd */
 177
 178 /*
 179  * External Bus Controller (EBC) Setup
 180  */
 181 #define CONFIG_SYS_FLASH                CONFIG_SYS_FLASH_BASE
 182
 183 /* Memory Bank 0 (NOR-FLASH) initialization */
 184 #define CONFIG_SYS_EBC_PB0AP            0x03017200
 185 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_FLASH | 0xda000)
 186
 187 #endif  /* __CONFIG_H */