include/configs/goflexhome.h

   1 /*
   2  * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
   3  *
   4  * Based on dockstar.h originally written by
   5  * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
   6  *
   7  * Based on sheevaplug.h originally written by
   8  * Prafulla Wadaskar <prafulla@marvell.com>
   9  * (C) Copyright 2009
  10  * Marvell Semiconductor <www.marvell.com>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef _CONFIG_GOFLEXHOME_H
  16 #define _CONFIG_GOFLEXHOME_H
  17
  18 #define CONFIG_SYS_GENERIC_BOARD
  19
  20 /*
  21  * Version number information
  22  */
  23 #define CONFIG_IDENT_STRING     "\nSeagate GoFlex Home"
  24
  25 /*
  26  * High Level Configuration Options (easy to change)
  27  */
  28 #define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  29 #define CONFIG_KW88F6281        1       /* SOC Name */
  30 #define CONFIG_MACH_GOFLEXHOME          /* Machine type */
  31 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  32
  33 /*
  34  * Default GPIO configuration and LED status
  35  */
  36 #define GOFLEXHOME_OE_LOW               (~(0))
  37 #define GOFLEXHOME_OE_HIGH              (~(0))
  38 #define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
  39 #define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
  40
  41 /* PHY related */
  42 #define MV88E1116_LED_FCTRL_REG         10
  43 #define MV88E1116_CPRSP_CR3_REG         21
  44 #define MV88E1116_MAC_CTRL_REG          21
  45 #define MV88E1116_PGADR_REG             22
  46 #define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
  47 #define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
  48
  49 /*
  50  * Commands configuration
  51  */
  52 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  53 #define CONFIG_CONSOLE_MUX
  54 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  55
  56 #include <config_cmd_default.h>
  57 #define CONFIG_CMD_DHCP
  58 #define CONFIG_CMD_ENV
  59 #define CONFIG_CMD_MII
  60 #define CONFIG_CMD_NAND
  61 #define CONFIG_CMD_PING
  62 #define CONFIG_CMD_USB
  63 #define CONFIG_CMD_IDE
  64 #define CONFIG_CMD_DATE
  65 #define CONFIG_CMD_EXT4
  66 #define CONFIG_SYS_MVFS         /* Picks up Filesystem from mv-common.h */
  67
  68 /*
  69  * mv-common.h should be defined after CMD configs since it used them
  70  * to enable certain macros
  71  */
  72 #include "mv-common.h"
  73
  74 #undef CONFIG_SYS_PROMPT        /* previously defined in mv-common.h */
  75 #define CONFIG_SYS_PROMPT       "GoFlexHome> "  /* Command Prompt */
  76
  77 /*
  78  *  Environment variables configurations
  79  */
  80 #ifdef CONFIG_CMD_NAND
  81 #define CONFIG_ENV_IS_IN_NAND           1
  82 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  83 #else
  84 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  85 #endif
  86 /*
  87  * max 4k env size is enough, but in case of nand
  88  * it has to be rounded to sector size
  89  */
  90 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  91 #define CONFIG_ENV_ADDR                 0xC0000
  92 #define CONFIG_ENV_OFFSET               0xC0000 /* env starts here */
  93
  94 /*
  95  * Default environment variables
  96  */
  97 #define CONFIG_BOOTCOMMAND \
  98         "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
  99         "ubi part root; " \
 100         "ubifsmount ubi:root; " \
 101         "ubifsload 0x800000 ${kernel}; " \
 102         "bootm 0x800000"
 103
 104 #define CONFIG_MTDPARTS \
 105         "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
 106
 107 #define CONFIG_EXTRA_ENV_SETTINGS \
 108         "console=console=ttyS0,115200\0" \
 109         "mtdids=nand0=orion_nand\0" \
 110         "mtdparts="CONFIG_MTDPARTS \
 111         "kernel=/boot/uImage\0" \
 112         "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 113
 114 /*
 115  * Ethernet Driver configuration
 116  */
 117 #ifdef CONFIG_CMD_NET
 118 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
 119 #define CONFIG_PHY_BASE_ADR     0
 120 #endif /* CONFIG_CMD_NET */
 121
 122 /*
 123  *  * SATA Driver configuration
 124  *   */
 125 #ifdef CONFIG_MVSATA_IDE
 126 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 127 #endif /*CONFIG_MVSATA_IDE*/
 128
 129 /*
 130  *  * RTC driver configuration
 131  *   */
 132 #ifdef CONFIG_CMD_DATE
 133 #define CONFIG_RTC_MV
 134 #endif /* CONFIG_CMD_DATE */
 135
 136 #endif /* _CONFIG_GOFLEXHOME_H */