include/configs/gplugd.h

   1 /*
   2  * (C) Copyright 2011
   3  * eInfochips Ltd. <www.einfochips.com>
   4  * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
   5  *
   6  * Based on Aspenite:
   7  * (C) Copyright 2010
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  * Contributor: Mahavir Jain <mjain@marvell.com>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_GPLUGD_H
  16 #define __CONFIG_GPLUGD_H
  17
  18 /*
  19  * FIXME: fix for error caused due to recent update to mach-types.h
  20  */
  21 #include <asm/mach-types.h>
  22 #ifdef MACH_TYPE_SHEEVAD
  23 #error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
  24 #else
  25 #define MACH_TYPE_SHEEVAD       2625
  26 #endif
  27
  28 /*
  29  * Version number information
  30  */
  31 #define CONFIG_IDENT_STRING     "\nMarvell-gplugD"
  32
  33 /*
  34  * High Level Configuration Options
  35  */
  36 #define CONFIG_SHEEVA_88SV331xV5        1       /* CPU Core subversion */
  37 #define CONFIG_ARMADA100                1       /* SOC Family Name */
  38 #define CONFIG_ARMADA168                1       /* SOC Used on this Board */
  39 #define CONFIG_MACH_TYPE                MACH_TYPE_SHEEVAD /* Machine type */
  40 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  41
  42 #define CONFIG_SYS_TEXT_BASE    0x00f00000
  43
  44 /*
  45  * There is no internal RAM in ARMADA100, using DRAM
  46  * TBD: dcache to be used for this
  47  */
  48 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - 0x00200000)
  49 #define CONFIG_NR_DRAM_BANKS_MAX        2
  50
  51 /*
  52  * Commands configuration
  53  */
  54 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  55 #define CONFIG_CMD_I2C
  56 #define CONFIG_CMD_USB
  57 #define CONFIG_CMD_EXT2
  58 #define CONFIG_CMD_FAT
  59
  60 /* Disable DCACHE */
  61 #define CONFIG_SYS_DCACHE_OFF
  62
  63 /* Network configuration */
  64 #ifdef CONFIG_CMD_NET
  65 #define CONFIG_CMD_PING
  66 #define CONFIG_ARMADA100_FEC
  67
  68 /* DHCP Support */
  69 #define CONFIG_CMD_DHCP
  70 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY         50000
  71 #endif /* CONFIG_CMD_NET */
  72
  73 /* GPIO Support */
  74 #define CONFIG_MARVELL_GPIO
  75
  76 /* PHY configuration */
  77 #define CONFIG_MII
  78 #define CONFIG_CMD_MII
  79 #define CONFIG_RESET_PHY_R
  80 /* 88E3015 register definition */
  81 #define PHY_LED_PAR_SEL_REG             22
  82 #define PHY_LED_MAN_REG                 25
  83 #define PHY_LED_VAL                     0x5b    /* LINK LED1, ACT LED2 */
  84 /* GPIO Configuration for PHY */
  85 #define CONFIG_SYS_GPIO_PHY_RST         104     /* GPIO104 */
  86
  87 /* SPI Support */
  88 #define CONFIG_ARMADA100_SPI
  89 #define CONFIG_ENV_SPI_CS               110
  90 #define CONFIG_SYS_SSP_PORT             2
  91
  92 /* Flash Support */
  93 #define CONFIG_CMD_SF
  94
  95 /*
  96  * mv-common.h should be defined after CMD configs since it used them
  97  * to enable certain macros
  98  */
  99 #include "mv-common.h"
 100 #undef CONFIG_ARCH_MISC_INIT
 101
 102 #ifdef CONFIG_SYS_NS16550_COM1
 103 #undef CONFIG_SYS_NS16550_COM1
 104 #endif /* CONFIG_SYS_NS16550_COM1 */
 105
 106 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
 107
 108 /*
 109  * Environment variables configurations
 110  */
 111 #define CONFIG_ENV_IS_IN_SPI_FLASH
 112 #define CONFIG_ENV_SECT_SIZE            0x4000
 113 #define CONFIG_ENV_SIZE                 0x4000
 114 #define CONFIG_ENV_OFFSET               0x07C000
 115
 116 #define CONFIG_CMD_ASKENV
 117
 118 #ifdef CONFIG_CMD_USB
 119 #define CONFIG_USB_EHCI
 120 #define CONFIG_USB_EHCI_ARMADA100
 121 #define CONFIG_EHCI_IS_TDI
 122 #define CONFIG_USB_STORAGE
 123 #endif /* CONFIG_CMD_USB */
 124
 125 #define CONFIG_DOS_PARTITION
 126 #define CONFIG_ISO_PARTITION
 127 #define CONFIG_SUPPORT_VFAT
 128
 129 #endif  /* __CONFIG_GPLUGD_H */