include/configs/gplugd.h

   1 /*
   2  * (C) Copyright 2011
   3  * eInfochips Ltd. <www.einfochips.com>
   4  * Written-by: Ajay Bhargav <contact@8051projects.net>
   5  *
   6  * Based on Aspenite:
   7  * (C) Copyright 2010
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  * Contributor: Mahavir Jain <mjain@marvell.com>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_GPLUGD_H
  16 #define __CONFIG_GPLUGD_H
  17
  18 /*
  19  * High Level Configuration Options
  20  */
  21 #define CONFIG_SHEEVA_88SV331xV5        1       /* CPU Core subversion */
  22 #define CONFIG_ARMADA100                1       /* SOC Family Name */
  23 #define CONFIG_ARMADA168                1       /* SOC Used on this Board */
  24 #define CONFIG_MACH_TYPE                MACH_TYPE_GPLUGD /* Machine type */
  25 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  26
  27 #define CONFIG_SYS_TEXT_BASE    0x00f00000
  28
  29 /*
  30  * There is no internal RAM in ARMADA100, using DRAM
  31  * TBD: dcache to be used for this
  32  */
  33 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - 0x00200000)
  34 #define CONFIG_NR_DRAM_BANKS_MAX        2
  35
  36 /*
  37  * Commands configuration
  38  */
  39 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  40
  41 /* Disable DCACHE */
  42 #define CONFIG_SYS_DCACHE_OFF
  43
  44 /* Network configuration */
  45 #ifdef CONFIG_CMD_NET
  46 #define CONFIG_ARMADA100_FEC
  47
  48 /* DHCP Support */
  49 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY         50000
  50 #endif /* CONFIG_CMD_NET */
  51
  52 /* GPIO Support */
  53 #define CONFIG_MARVELL_GPIO
  54
  55 /* PHY configuration */
  56 #define CONFIG_MII
  57 #define CONFIG_RESET_PHY_R
  58 /* 88E3015 register definition */
  59 #define PHY_LED_PAR_SEL_REG             22
  60 #define PHY_LED_MAN_REG                 25
  61 #define PHY_LED_VAL                     0x5b    /* LINK LED1, ACT LED2 */
  62 /* GPIO Configuration for PHY */
  63 #define CONFIG_SYS_GPIO_PHY_RST         104     /* GPIO104 */
  64
  65 /* Flash Support */
  66
  67 /*
  68  * mv-common.h should be defined after CMD configs since it used them
  69  * to enable certain macros
  70  */
  71 #include "mv-common.h"
  72
  73 #ifdef CONFIG_SYS_NS16550_COM1
  74 #undef CONFIG_SYS_NS16550_COM1
  75 #endif /* CONFIG_SYS_NS16550_COM1 */
  76
  77 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
  78
  79 /*
  80  * Environment variables configurations
  81  */
  82 #define CONFIG_ENV_IS_NOWHERE
  83 #define CONFIG_ENV_SIZE                 0x4000
  84
  85 #ifdef CONFIG_CMD_USB
  86 #define CONFIG_USB_EHCI
  87 #define CONFIG_USB_EHCI_ARMADA100
  88 #define CONFIG_EHCI_IS_TDI
  89 #endif /* CONFIG_CMD_USB */
  90
  91 #define CONFIG_SUPPORT_VFAT
  92
  93 #endif  /* __CONFIG_GPLUGD_H */