include/configs/gplugd.h

   1 /*
   2  * (C) Copyright 2011
   3  * eInfochips Ltd. <www.einfochips.com>
   4  * Written-by: Ajay Bhargav <contact@8051projects.net>
   5  *
   6  * Based on Aspenite:
   7  * (C) Copyright 2010
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  * Contributor: Mahavir Jain <mjain@marvell.com>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_GPLUGD_H
  16 #define __CONFIG_GPLUGD_H
  17
  18 /*
  19  * High Level Configuration Options
  20  */
  21 #define CONFIG_SHEEVA_88SV331xV5        1       /* CPU Core subversion */
  22 #define CONFIG_ARMADA100                1       /* SOC Family Name */
  23 #define CONFIG_ARMADA168                1       /* SOC Used on this Board */
  24 #define CONFIG_MACH_TYPE                MACH_TYPE_GPLUGD /* Machine type */
  25 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  26
  27 /*
  28  * There is no internal RAM in ARMADA100, using DRAM
  29  * TBD: dcache to be used for this
  30  */
  31 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - 0x00200000)
  32 #define CONFIG_NR_DRAM_BANKS_MAX        2
  33
  34 /*
  35  * Commands configuration
  36  */
  37
  38 /* Disable DCACHE */
  39 #define CONFIG_SYS_DCACHE_OFF
  40
  41 /* Network configuration */
  42 #ifdef CONFIG_CMD_NET
  43 #define CONFIG_ARMADA100_FEC
  44
  45 /* DHCP Support */
  46 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY         50000
  47 #endif /* CONFIG_CMD_NET */
  48
  49 /* GPIO Support */
  50 #define CONFIG_MARVELL_GPIO
  51
  52 /* PHY configuration */
  53 #define CONFIG_MII
  54 #define CONFIG_RESET_PHY_R
  55 /* 88E3015 register definition */
  56 #define PHY_LED_PAR_SEL_REG             22
  57 #define PHY_LED_MAN_REG                 25
  58 #define PHY_LED_VAL                     0x5b    /* LINK LED1, ACT LED2 */
  59 /* GPIO Configuration for PHY */
  60 #define CONFIG_SYS_GPIO_PHY_RST         104     /* GPIO104 */
  61
  62 /* Flash Support */
  63
  64 /*
  65  * mv-common.h should be defined after CMD configs since it used them
  66  * to enable certain macros
  67  */
  68 #include "mv-common.h"
  69
  70 #ifdef CONFIG_SYS_NS16550_COM1
  71 #undef CONFIG_SYS_NS16550_COM1
  72 #endif /* CONFIG_SYS_NS16550_COM1 */
  73
  74 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
  75
  76 /*
  77  * Environment variables configurations
  78  */
  79 #define CONFIG_ENV_SIZE                 0x4000
  80
  81 #ifdef CONFIG_CMD_USB
  82 #define CONFIG_USB_EHCI_ARMADA100
  83 #define CONFIG_EHCI_IS_TDI
  84 #endif /* CONFIG_CMD_USB */
  85
  86 #endif  /* __CONFIG_GPLUGD_H */