include/configs/gplugd.h

   1 /*
   2  * (C) Copyright 2011
   3  * eInfochips Ltd. <www.einfochips.com>
   4  * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
   5  *
   6  * Based on Aspenite:
   7  * (C) Copyright 2010
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  * Contributor: Mahavir Jain <mjain@marvell.com>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_GPLUGD_H
  16 #define __CONFIG_GPLUGD_H
  17
  18 /*
  19  * FIXME: fix for error caused due to recent update to mach-types.h
  20  */
  21 #include <asm/mach-types.h>
  22 #ifdef MACH_TYPE_SHEEVAD
  23 #error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
  24 #else
  25 #define MACH_TYPE_SHEEVAD       2625
  26 #endif
  27
  28 /*
  29  * High Level Configuration Options
  30  */
  31 #define CONFIG_SHEEVA_88SV331xV5        1       /* CPU Core subversion */
  32 #define CONFIG_ARMADA100                1       /* SOC Family Name */
  33 #define CONFIG_ARMADA168                1       /* SOC Used on this Board */
  34 #define CONFIG_MACH_TYPE                MACH_TYPE_SHEEVAD /* Machine type */
  35 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  36
  37 #define CONFIG_SYS_TEXT_BASE    0x00f00000
  38
  39 /*
  40  * There is no internal RAM in ARMADA100, using DRAM
  41  * TBD: dcache to be used for this
  42  */
  43 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - 0x00200000)
  44 #define CONFIG_NR_DRAM_BANKS_MAX        2
  45
  46 /*
  47  * Commands configuration
  48  */
  49 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  50
  51 /* Disable DCACHE */
  52 #define CONFIG_SYS_DCACHE_OFF
  53
  54 /* Network configuration */
  55 #ifdef CONFIG_CMD_NET
  56 #define CONFIG_ARMADA100_FEC
  57
  58 /* DHCP Support */
  59 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY         50000
  60 #endif /* CONFIG_CMD_NET */
  61
  62 /* GPIO Support */
  63 #define CONFIG_MARVELL_GPIO
  64
  65 /* PHY configuration */
  66 #define CONFIG_MII
  67 #define CONFIG_RESET_PHY_R
  68 /* 88E3015 register definition */
  69 #define PHY_LED_PAR_SEL_REG             22
  70 #define PHY_LED_MAN_REG                 25
  71 #define PHY_LED_VAL                     0x5b    /* LINK LED1, ACT LED2 */
  72 /* GPIO Configuration for PHY */
  73 #define CONFIG_SYS_GPIO_PHY_RST         104     /* GPIO104 */
  74
  75 /* Flash Support */
  76
  77 /*
  78  * mv-common.h should be defined after CMD configs since it used them
  79  * to enable certain macros
  80  */
  81 #include "mv-common.h"
  82 #undef CONFIG_ARCH_MISC_INIT
  83
  84 #ifdef CONFIG_SYS_NS16550_COM1
  85 #undef CONFIG_SYS_NS16550_COM1
  86 #endif /* CONFIG_SYS_NS16550_COM1 */
  87
  88 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
  89
  90 /*
  91  * Environment variables configurations
  92  */
  93 #define CONFIG_ENV_IS_NOWHERE
  94 #define CONFIG_ENV_SIZE                 0x4000
  95
  96 #ifdef CONFIG_CMD_USB
  97 #define CONFIG_USB_EHCI
  98 #define CONFIG_USB_EHCI_ARMADA100
  99 #define CONFIG_EHCI_IS_TDI
 100 #endif /* CONFIG_CMD_USB */
 101
 102 #define CONFIG_DOS_PARTITION
 103 #define CONFIG_ISO_PARTITION
 104 #define CONFIG_SUPPORT_VFAT
 105
 106 #endif  /* __CONFIG_GPLUGD_H */