include/configs/guruplug.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Written-by: Siddarth Gore <gores@marvell.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef _CONFIG_GURUPLUG_H
  10 #define _CONFIG_GURUPLUG_H
  11
  12 /*
  13  * Version number information
  14  */
  15 #define CONFIG_IDENT_STRING     "\nMarvell-GuruPlug"
  16
  17 /*
  18  * High Level Configuration Options (easy to change)
  19  */
  20 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  21 #define CONFIG_KW88F6281        1       /* SOC Name */
  22 #define CONFIG_MACH_GURUPLUG    /* Machine type */
  23 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  24
  25 /*
  26  * Commands configuration
  27  */
  28 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  29 #include <config_cmd_default.h>
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_ENV
  32 #define CONFIG_CMD_FAT
  33 #define CONFIG_CMD_NAND
  34 #define CONFIG_CMD_PING
  35 #define CONFIG_CMD_USB
  36 #define CONFIG_CMD_IDE
  37
  38 /*
  39  * mv-common.h should be defined after CMD configs since it used them
  40  * to enable certain macros
  41  */
  42 #include "mv-common.h"
  43
  44 /*
  45  *  Environment variables configurations
  46  */
  47 #ifdef CONFIG_CMD_NAND
  48 #define CONFIG_ENV_IS_IN_NAND           1
  49 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  50 #else
  51 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  52 #endif
  53 /*
  54  * max 4k env size is enough, but in case of nand
  55  * it has to be rounded to sector size
  56  */
  57 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  58 #define CONFIG_ENV_ADDR                 0x60000
  59 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  60
  61 /*
  62  * Default environment variables
  63  */
  64 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  65         "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  66         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  67         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  68         "bootm 0x6400000;"
  69
  70 #define CONFIG_EXTRA_ENV_SETTINGS       \
  71         "x_bootcmd_ethernet=ping 192.168.2.1\0" \
  72         "x_bootcmd_usb=usb start\0"     \
  73         "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
  74         "x_bootargs=console=ttyS0,115200\0"     \
  75         "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
  76
  77 /*
  78  * Ethernet Driver configuration
  79  */
  80 #ifdef CONFIG_CMD_NET
  81 #define CONFIG_MVGBE_PORTS      {1, 1}  /* enable both ports */
  82 #define CONFIG_PHY_BASE_ADR     0
  83 #endif /* CONFIG_CMD_NET */
  84
  85 /*
  86  * SATA Driver configuration
  87  */
  88 #ifdef CONFIG_MVSATA_IDE
  89 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  90 #endif /*CONFIG_MVSATA_IDE*/
  91
  92 #define CONFIG_SYS_ALT_MEMTEST
  93
  94 #endif /* _CONFIG_GURUPLUG_H */