include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 /* Location in NAND to read U-Boot from */
  13 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  14
  15 /* Falcon Mode */
  16 #define CONFIG_CMD_SPL
  17 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  18 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  19
  20 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  21 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  22 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  23
  24 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  26 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  27 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  28
  29 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  30 #include "mx6_common.h"
  31 #define CONFIG_DISPLAY_BOARDINFO_LATE
  32
  33 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  34
  35 /* Serial ATAG */
  36 #define CONFIG_SERIAL_TAG
  37
  38 /* Size of malloc() pool */
  39 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  40
  41 /* Init Functions */
  42 #define CONFIG_BOARD_EARLY_INIT_F
  43 #define CONFIG_MISC_INIT_R
  44
  45 /* Driver Model */
  46 #ifndef CONFIG_SPL_BUILD
  47 #define CONFIG_DM_GPIO
  48 #define CONFIG_DM_THERMAL
  49 #endif
  50
  51 /* Thermal */
  52 #define CONFIG_IMX_THERMAL
  53
  54 /* Serial */
  55 #define CONFIG_MXC_UART
  56 #define CONFIG_MXC_UART_BASE           UART2_BASE
  57
  58 #ifdef CONFIG_SPI_FLASH
  59
  60 /* SPI */
  61 #ifdef CONFIG_CMD_SF
  62   #define CONFIG_MXC_SPI
  63   #define CONFIG_SPI_FLASH_MTD
  64   #define CONFIG_SPI_FLASH_BAR
  65   #define CONFIG_SF_DEFAULT_BUS              0
  66   #define CONFIG_SF_DEFAULT_CS               0
  67                                              /* GPIO 3-19 (21248) */
  68   #define CONFIG_SF_DEFAULT_SPEED            30000000
  69   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  70 #endif
  71
  72 #else
  73 /* Enable NAND support */
  74 #define CONFIG_CMD_NAND
  75 #define CONFIG_CMD_NAND_TRIMFFS
  76 #ifdef CONFIG_CMD_NAND
  77   #define CONFIG_NAND_MXS
  78   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  79   #define CONFIG_SYS_NAND_BASE          0x40000000
  80   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  81   #define CONFIG_SYS_NAND_ONFI_DETECTION
  82
  83   /* DMA stuff, needed for GPMI/MXS NAND support */
  84   #define CONFIG_APBH_DMA
  85   #define CONFIG_APBH_DMA_BURST
  86   #define CONFIG_APBH_DMA_BURST8
  87 #endif
  88
  89 #endif /* CONFIG_SPI_FLASH */
  90
  91 /* I2C Configs */
  92 #define CONFIG_SYS_I2C
  93 #define CONFIG_SYS_I2C_MXC
  94 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  95 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  96 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  97 #define CONFIG_SYS_I2C_SPEED            100000
  98 #define CONFIG_I2C_GSC                  0
  99 #define CONFIG_I2C_PMIC                 1
 100 #define CONFIG_I2C_EDID
 101
 102 /* MMC Configs */
 103 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 104 #define CONFIG_SYS_FSL_USDHC_NUM       1
 105
 106 /* Filesystem support */
 107 #define CONFIG_CMD_UBIFS
 108
 109 /*
 110  * SATA Configs
 111  */
 112 #define CONFIG_CMD_SATA
 113 #ifdef CONFIG_CMD_SATA
 114   #define CONFIG_DWC_AHSATA
 115   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 116   #define CONFIG_DWC_AHSATA_PORT_ID     0
 117   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 118   #define CONFIG_LBA48
 119   #define CONFIG_LIBATA
 120 #endif
 121
 122 /*
 123  * PCI express
 124  */
 125 #define CONFIG_CMD_PCI
 126 #ifdef CONFIG_CMD_PCI
 127 #define CONFIG_PCI
 128 #define CONFIG_PCI_PNP
 129 #define CONFIG_PCI_SCAN_SHOW
 130 #define CONFIG_PCI_FIXUP_DEV
 131 #define CONFIG_PCIE_IMX
 132 #endif
 133
 134 /*
 135  * PMIC
 136  */
 137 #define CONFIG_POWER
 138 #define CONFIG_POWER_I2C
 139 #define CONFIG_POWER_PFUZE100
 140 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 141 #define CONFIG_POWER_LTC3676
 142 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 143
 144 /* Various command support */
 145 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 146 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 147 #define CONFIG_CMD_GSC
 148 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 149 #define CONFIG_RBTREE
 150
 151 /* Ethernet support */
 152 #define CONFIG_FEC_MXC
 153 #define CONFIG_MII
 154 #define IMX_FEC_BASE             ENET_BASE_ADDR
 155 #define CONFIG_FEC_XCV_TYPE      RGMII
 156 #define CONFIG_FEC_MXC_PHYADDR   0
 157 #define CONFIG_PHYLIB
 158 #define CONFIG_ARP_TIMEOUT       200UL
 159
 160 /* USB Configs */
 161 #define CONFIG_USB_EHCI
 162 #define CONFIG_USB_EHCI_MX6
 163 #define CONFIG_USB_HOST_ETHER
 164 #define CONFIG_USB_ETHER_ASIX
 165 #define CONFIG_USB_ETHER_SMSC95XX
 166 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 167 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 168 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 169 #define CONFIG_MXC_USB_FLAGS      0
 170 #define CONFIG_USB_KEYBOARD
 171 #define CONFIG_USBD_HS
 172 #define CONFIG_USB_ETHER
 173 #define CONFIG_USB_ETH_CDC
 174 #define CONFIG_NETCONSOLE
 175 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 176
 177 /* USB Mass Storage Gadget */
 178 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 179
 180 /* Framebuffer and LCD */
 181 #define CONFIG_VIDEO_IPUV3
 182 #define CONFIG_CFB_CONSOLE
 183 #define CONFIG_VGA_AS_SINGLE_DEVICE
 184 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 185 #define CONFIG_VIDEO_LOGO
 186 #define CONFIG_IPUV3_CLK          260000000
 187 #define CONFIG_CMD_HDMIDETECT
 188 #define CONFIG_CONSOLE_MUX
 189 #define CONFIG_IMX_HDMI
 190 #define CONFIG_IMX_VIDEO_SKIP
 191 #define CONFIG_VIDEO_BMP_LOGO
 192 #define CONFIG_SPLASH_SCREEN_ALIGN
 193 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 194
 195 /* Miscellaneous configurable options */
 196 #define CONFIG_HWCONFIG
 197 #define CONFIG_PREBOOT
 198
 199 /* Print Buffer Size */
 200 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 201
 202 /* Memory configuration */
 203 #define CONFIG_SYS_MEMTEST_START       0x10000000
 204 #define CONFIG_SYS_MEMTEST_END         0x10010000
 205 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 206
 207 /* Physical Memory Map */
 208 #define CONFIG_NR_DRAM_BANKS           1
 209 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 210 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 211 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 212 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 213
 214 #define CONFIG_SYS_INIT_SP_OFFSET \
 215         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 216 #define CONFIG_SYS_INIT_SP_ADDR \
 217         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 218
 219 /*
 220  * MTD Command for mtdparts
 221  */
 222 #define CONFIG_LZO
 223 #define CONFIG_CMD_MTDPARTS
 224 #define CONFIG_MTD_DEVICE
 225 #define CONFIG_MTD_PARTITIONS
 226 #ifdef CONFIG_SPI_FLASH
 227 #define MTDIDS_DEFAULT    "nor0=nor"
 228 #define MTDPARTS_DEFAULT  \
 229         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 230 #else
 231 #define MTDIDS_DEFAULT    "nand0=nand"
 232 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 233 #endif
 234
 235 /* Persistent Environment Config */
 236 #ifdef CONFIG_SPI_FLASH
 237 #define CONFIG_ENV_IS_IN_SPI_FLASH
 238 #else
 239 #define CONFIG_ENV_IS_IN_NAND
 240 #endif
 241 #if defined(CONFIG_ENV_IS_IN_MMC)
 242   #define CONFIG_SYS_MMC_ENV_DEV         0
 243   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 244   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 245   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 246 #elif defined(CONFIG_ENV_IS_IN_NAND)
 247   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 248   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 249   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 250   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 251   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 252 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 253   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 254   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 255   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 256   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 257   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 258   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 259   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 260 #endif
 261
 262 /* Environment */
 263 #define CONFIG_IPADDR             192.168.1.1
 264 #define CONFIG_SERVERIP           192.168.1.146
 265
 266 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 267         "pcidisable=1\0" \
 268         "splashpos=m,m\0" \
 269         "usb_pgood_delay=2000\0" \
 270         "console=ttymxc1\0" \
 271         "bootdevs=usb mmc sata flash\0" \
 272         "hwconfig=_UNKNOWN_\0" \
 273         "video=\0" \
 274         \
 275         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 276         "mtdids=" MTDIDS_DEFAULT "\0" \
 277         "disk=0\0" \
 278         "part=1\0" \
 279         \
 280         "fdt_high=0xffffffff\0" \
 281         "fdt_addr=0x18000000\0" \
 282         "initrd_high=0xffffffff\0" \
 283         "fixfdt=" \
 284                 "fdt addr ${fdt_addr}\0" \
 285         "bootdir=boot\0" \
 286         "loadfdt=" \
 287                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 288                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 289                         "run fixfdt; " \
 290                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 291                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 292                         "run fixfdt; " \
 293                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 294                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 295                         "run fixfdt; " \
 296                 "fi\0" \
 297         \
 298         "fs=ext4\0" \
 299         "script=6x_bootscript-ventana\0" \
 300         "loadscript=" \
 301                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 302                         "source ${loadaddr}; " \
 303                 "fi\0" \
 304         \
 305         "uimage=uImage\0" \
 306         "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \
 307         "mmc_boot=" \
 308                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 309                 "mmc dev ${disk} && mmc rescan && " \
 310                 "setenv dtype mmc; run loadscript; " \
 311                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 312                         "setenv bootargs console=${console},${baudrate} " \
 313                                 "root=/dev/mmcblk0p1 rootfstype=${fs} " \
 314                                 "rootwait rw ${video} ${extra}; " \
 315                         "if run loadfdt; then " \
 316                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 317                         "else " \
 318                                 "bootm; " \
 319                         "fi; " \
 320                 "fi\0" \
 321         \
 322         "sata_boot=" \
 323                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 324                 "sata init && " \
 325                 "setenv dtype sata; run loadscript; " \
 326                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 327                         "setenv bootargs console=${console},${baudrate} " \
 328                                 "root=/dev/sda1 rootfstype=${fs} " \
 329                                 "rootwait rw ${video} ${extra}; " \
 330                         "if run loadfdt; then " \
 331                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 332                         "else " \
 333                                 "bootm; " \
 334                         "fi; " \
 335                 "fi\0" \
 336         "usb_boot=" \
 337                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 338                 "usb start && usb dev ${disk} && " \
 339                 "setenv dtype usb; run loadscript; " \
 340                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 341                         "setenv bootargs console=${console},${baudrate} " \
 342                                 "root=/dev/sda1 rootfstype=${fs} " \
 343                                 "rootwait rw ${video} ${extra}; " \
 344                         "if run loadfdt; then " \
 345                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 346                         "else " \
 347                                 "bootm; " \
 348                         "fi; " \
 349                 "fi\0"
 350
 351 #ifdef CONFIG_SPI_FLASH
 352         #define CONFIG_EXTRA_ENV_SETTINGS \
 353         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 354         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 355         "image_uboot=ventana/u-boot_spi.imx\0" \
 356         \
 357         "spi_koffset=0x90000\0" \
 358         "spi_klen=0x200000\0" \
 359         \
 360         "spi_updateuboot=echo Updating uboot from " \
 361                 "${serverip}:${image_uboot}...; " \
 362                 "tftpboot ${loadaddr} ${image_uboot} && " \
 363                 "sf probe && sf erase 0 80000 && " \
 364                         "sf write ${loadaddr} 400 ${filesize}\0" \
 365         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 366                 "to ${spi_koffset} ...; " \
 367                 "tftp ${loadaddr} ${image_os} && " \
 368                 "sf probe && " \
 369                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 370         \
 371         "flash_boot=" \
 372                 "if sf probe && " \
 373                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 374                         "setenv bootargs console=${console},${baudrate} " \
 375                                 "root=/dev/mtdblock3 " \
 376                                 "rootfstype=squashfs,jffs2 " \
 377                                 "${video} ${extra}; " \
 378                         "bootm; " \
 379                 "fi\0"
 380 #else
 381         #define CONFIG_EXTRA_ENV_SETTINGS \
 382         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 383         \
 384         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 385         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 386                 "tftp ${loadaddr} ${image_rootfs} && " \
 387                 "nand erase.part rootfs && " \
 388                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 389         \
 390         "flash_boot=" \
 391                 "setenv fsload 'ubifsload'; " \
 392                 "ubi part rootfs; " \
 393                 "if ubi check boot; then " \
 394                         "ubifsmount ubi0:boot; " \
 395                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 396                                 "rootfstype=squashfs,ubifs; " \
 397                         "setenv bootdir; " \
 398                 "elif ubi check rootfs; then " \
 399                         "ubifsmount ubi0:rootfs; " \
 400                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 401                                 "rootfstype=ubifs; " \
 402                 "fi; " \
 403                 "setenv dtype nand; run loadscript; " \
 404                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 405                         "setenv bootargs console=${console},${baudrate} " \
 406                                 "root=${root} ${video} ${extra}; " \
 407                         "if run loadfdt; then " \
 408                                 "ubifsumount; " \
 409                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 410                         "else " \
 411                                 "ubifsumount; bootm; " \
 412                         "fi; " \
 413                 "fi\0"
 414 #endif
 415
 416 #define CONFIG_BOOTCOMMAND \
 417         "for btype in ${bootdevs}; do " \
 418                 "echo; echo Attempting ${btype} boot...; " \
 419                 "if run ${btype}_boot; then; fi; " \
 420         "done"
 421
 422 #endif                         /* __CONFIG_H */