include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 #define CONFIG_SPL_NAND_SUPPORT
  13 #define CONFIG_SPL_MMC_SUPPORT
  14 #define CONFIG_SPL_POWER_SUPPORT
  15 /* Location in NAND to read U-Boot from */
  16 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  17
  18 /* Falcon Mode */
  19 #define CONFIG_CMD_SPL
  20 #define CONFIG_SPL_OS_BOOT
  21 #define CONFIG_SPL_ENV_SUPPORT
  22 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  23 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  24
  25 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  26 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  27 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  28
  29 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  31 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  32 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  33
  34 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  35 #include "mx6_common.h"
  36
  37 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  38
  39 /* Serial ATAG */
  40 #define CONFIG_SERIAL_TAG
  41
  42 /* Size of malloc() pool */
  43 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  44
  45 /* Init Functions */
  46 #define CONFIG_BOARD_EARLY_INIT_F
  47 #define CONFIG_MISC_INIT_R
  48
  49 /* Driver Model */
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_DM_GPIO
  52 #define CONFIG_DM_THERMAL
  53 #endif
  54
  55 /* GPIO */
  56 #define CONFIG_MXC_GPIO
  57 #define CONFIG_CMD_GPIO
  58
  59 /* Thermal */
  60 #define CONFIG_IMX6_THERMAL
  61
  62 /* Serial */
  63 #define CONFIG_MXC_UART
  64 #define CONFIG_MXC_UART_BASE           UART2_BASE
  65
  66 #ifdef CONFIG_SPI_FLASH
  67
  68 /* SPI */
  69 #define CONFIG_CMD_SF
  70 #ifdef CONFIG_CMD_SF
  71   #define CONFIG_MXC_SPI
  72   #define CONFIG_SPI_FLASH_MTD
  73   #define CONFIG_SPI_FLASH_BAR
  74   #define CONFIG_SPI_FLASH_WINBOND
  75   #define CONFIG_SF_DEFAULT_BUS              0
  76   #define CONFIG_SF_DEFAULT_CS               0
  77                                              /* GPIO 3-19 (21248) */
  78   #define CONFIG_SF_DEFAULT_SPEED            30000000
  79   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  80 #endif
  81
  82 #else
  83 /* Enable NAND support */
  84 #define CONFIG_CMD_TIME
  85 #define CONFIG_CMD_NAND
  86 #define CONFIG_CMD_NAND_TRIMFFS
  87 #ifdef CONFIG_CMD_NAND
  88   #define CONFIG_NAND_MXS
  89   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  90   #define CONFIG_SYS_NAND_BASE          0x40000000
  91   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  92   #define CONFIG_SYS_NAND_ONFI_DETECTION
  93
  94   /* DMA stuff, needed for GPMI/MXS NAND support */
  95   #define CONFIG_APBH_DMA
  96   #define CONFIG_APBH_DMA_BURST
  97   #define CONFIG_APBH_DMA_BURST8
  98 #endif
  99
 100 #endif /* CONFIG_SPI_FLASH */
 101
 102 /* Flattened Image Tree Suport */
 103 #define CONFIG_FIT
 104 #define CONFIG_FIT_VERBOSE
 105
 106 /* I2C Configs */
 107 #define CONFIG_CMD_I2C
 108 #define CONFIG_SYS_I2C
 109 #define CONFIG_SYS_I2C_MXC
 110 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 111 #define CONFIG_SYS_I2C_SPEED            100000
 112 #define CONFIG_I2C_GSC                  0
 113 #define CONFIG_I2C_PMIC                 1
 114 #define CONFIG_I2C_EDID
 115
 116 /* MMC Configs */
 117 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 118 #define CONFIG_SYS_FSL_USDHC_NUM       1
 119
 120 /* Filesystem support */
 121 #define CONFIG_CMD_UBIFS
 122
 123 /*
 124  * SATA Configs
 125  */
 126 #define CONFIG_CMD_SATA
 127 #ifdef CONFIG_CMD_SATA
 128   #define CONFIG_DWC_AHSATA
 129   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 130   #define CONFIG_DWC_AHSATA_PORT_ID     0
 131   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 132   #define CONFIG_LBA48
 133   #define CONFIG_LIBATA
 134 #endif
 135
 136 /*
 137  * PCI express
 138  */
 139 #define CONFIG_CMD_PCI
 140 #ifdef CONFIG_CMD_PCI
 141 #define CONFIG_PCI
 142 #define CONFIG_PCI_PNP
 143 #define CONFIG_PCI_SCAN_SHOW
 144 #define CONFIG_PCI_FIXUP_DEV
 145 #define CONFIG_PCIE_IMX
 146 #endif
 147
 148 /*
 149  * PMIC
 150  */
 151 #define CONFIG_POWER
 152 #define CONFIG_POWER_I2C
 153 #define CONFIG_POWER_PFUZE100
 154 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 155 #define CONFIG_POWER_LTC3676
 156 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 157
 158 /* Various command support */
 159 #define CONFIG_CMD_PING
 160 #define CONFIG_CMD_DHCP
 161 #define CONFIG_CMD_MII
 162 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 163 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 164 #define CONFIG_CMD_GSC
 165 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 166 #define CONFIG_CMD_UBI
 167 #define CONFIG_RBTREE
 168
 169 /* Ethernet support */
 170 #define CONFIG_FEC_MXC
 171 #define CONFIG_MII
 172 #define IMX_FEC_BASE             ENET_BASE_ADDR
 173 #define CONFIG_FEC_XCV_TYPE      RGMII
 174 #define CONFIG_FEC_MXC_PHYADDR   0
 175 #define CONFIG_PHYLIB
 176 #define CONFIG_ARP_TIMEOUT       200UL
 177
 178 /* USB Configs */
 179 #define CONFIG_CMD_USB
 180 #define CONFIG_USB_EHCI
 181 #define CONFIG_USB_EHCI_MX6
 182 #define CONFIG_USB_STORAGE
 183 #define CONFIG_USB_HOST_ETHER
 184 #define CONFIG_USB_ETHER_ASIX
 185 #define CONFIG_USB_ETHER_SMSC95XX
 186 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 187 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 188 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 189 #define CONFIG_MXC_USB_FLAGS      0
 190 #define CONFIG_USB_KEYBOARD
 191 #define CONFIG_CI_UDC
 192 #define CONFIG_USBD_HS
 193 #define CONFIG_USB_GADGET_DUALSPEED
 194 #define CONFIG_USB_ETHER
 195 #define CONFIG_USB_ETH_CDC
 196 #define CONFIG_NETCONSOLE
 197 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 198
 199 /* USB Mass Storage Gadget */
 200 #define CONFIG_USB_GADGET
 201 #define CONFIG_CMD_USB_MASS_STORAGE
 202 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 203 #define CONFIG_USB_GADGET_DOWNLOAD
 204 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 205
 206 /* Netchip IDs */
 207 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 208 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 209 #define CONFIG_G_DNL_MANUFACTURER "Gateworks"
 210
 211 /* Framebuffer and LCD */
 212 #define CONFIG_VIDEO
 213 #define CONFIG_VIDEO_IPUV3
 214 #define CONFIG_CFB_CONSOLE
 215 #define CONFIG_VGA_AS_SINGLE_DEVICE
 216 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 217 #define CONFIG_VIDEO_BMP_RLE8
 218 #define CONFIG_SPLASH_SCREEN
 219 #define CONFIG_BMP_16BPP
 220 #define CONFIG_VIDEO_LOGO
 221 #define CONFIG_IPUV3_CLK          260000000
 222 #define CONFIG_CMD_HDMIDETECT
 223 #define CONFIG_CONSOLE_MUX
 224 #define CONFIG_IMX_HDMI
 225 #define CONFIG_IMX_VIDEO_SKIP
 226
 227 /* Miscellaneous configurable options */
 228 #define CONFIG_HWCONFIG
 229
 230 /* Print Buffer Size */
 231 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 232
 233 /* Memory configuration */
 234 #define CONFIG_SYS_MEMTEST_START       0x10000000
 235 #define CONFIG_SYS_MEMTEST_END         0x10010000
 236 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 237
 238 /* Physical Memory Map */
 239 #define CONFIG_NR_DRAM_BANKS           1
 240 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 241 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 242 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 243 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 244
 245 #define CONFIG_SYS_INIT_SP_OFFSET \
 246         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 247 #define CONFIG_SYS_INIT_SP_ADDR \
 248         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 249
 250 /*
 251  * MTD Command for mtdparts
 252  */
 253 #define CONFIG_LZO
 254 #define CONFIG_CMD_MTDPARTS
 255 #define CONFIG_MTD_DEVICE
 256 #define CONFIG_MTD_PARTITIONS
 257 #ifdef CONFIG_SPI_FLASH
 258 #define MTDIDS_DEFAULT    "nor0=nor"
 259 #define MTDPARTS_DEFAULT  \
 260         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 261 #else
 262 #define MTDIDS_DEFAULT    "nand0=nand"
 263 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 264 #endif
 265
 266 /* Persistent Environment Config */
 267 #ifdef CONFIG_SPI_FLASH
 268 #define CONFIG_ENV_IS_IN_SPI_FLASH
 269 #else
 270 #define CONFIG_ENV_IS_IN_NAND
 271 #endif
 272 #if defined(CONFIG_ENV_IS_IN_MMC)
 273   #define CONFIG_SYS_MMC_ENV_DEV         0
 274   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 275   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 276   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 277 #elif defined(CONFIG_ENV_IS_IN_NAND)
 278   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 279   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 280   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 281   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 282   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 283 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 284   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 285   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 286   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 287   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 288   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 289   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 290   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 291 #endif
 292
 293 /* Environment */
 294 #define CONFIG_IPADDR             192.168.1.1
 295 #define CONFIG_SERVERIP           192.168.1.146
 296 #define HWCONFIG_DEFAULT \
 297         "hwconfig=rs232;" \
 298         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 299
 300 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 301         "usb_pgood_delay=2000\0" \
 302         "console=ttymxc1\0" \
 303         "bootdevs=usb mmc sata flash\0" \
 304         HWCONFIG_DEFAULT \
 305         "video=\0" \
 306         \
 307         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 308         "mtdids=" MTDIDS_DEFAULT "\0" \
 309         \
 310         "fdt_high=0xffffffff\0" \
 311         "fdt_addr=0x18000000\0" \
 312         "initrd_high=0xffffffff\0" \
 313         "bootdir=boot\0" \
 314         "loadfdt=" \
 315                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 316                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 317                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 318                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 319                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 320                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 321                 "fi\0" \
 322         \
 323         "script=6x_bootscript-ventana\0" \
 324         "loadscript=" \
 325                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 326                         "source; " \
 327                 "fi\0" \
 328         \
 329         "uimage=uImage\0" \
 330         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 331         "mmc_boot=" \
 332                 "setenv fsload 'ext2load mmc 0:1'; " \
 333                 "mmc dev 0 && mmc rescan && " \
 334                 "setenv dtype mmc; run loadscript; " \
 335                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 336                         "setenv bootargs console=${console},${baudrate} " \
 337                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 338                                 "rootwait rw ${video} ${extra}; " \
 339                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 340                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 341                         "else " \
 342                                 "bootm; " \
 343                         "fi; " \
 344                 "fi\0" \
 345         \
 346         "sata_boot=" \
 347                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 348                 "setenv dtype sata; run loadscript; " \
 349                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 350                         "setenv bootargs console=${console},${baudrate} " \
 351                                 "root=/dev/sda1 rootfstype=ext4 " \
 352                                 "rootwait rw ${video} ${extra}; " \
 353                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 354                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 355                         "else " \
 356                                 "bootm; " \
 357                         "fi; " \
 358                 "fi\0" \
 359         "usb_boot=" \
 360                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 361                 "setenv dtype usb; run loadscript; " \
 362                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 363                         "setenv bootargs console=${console},${baudrate} " \
 364                                 "root=/dev/sda1 rootfstype=ext4 " \
 365                                 "rootwait rw ${video} ${extra}; " \
 366                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 367                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 368                         "else " \
 369                                 "bootm; " \
 370                         "fi; " \
 371                 "fi\0"
 372
 373 #ifdef CONFIG_SPI_FLASH
 374         #define CONFIG_EXTRA_ENV_SETTINGS \
 375         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 376         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 377         "image_uboot=ventana/u-boot_spi.imx\0" \
 378         \
 379         "spi_koffset=0x90000\0" \
 380         "spi_klen=0x200000\0" \
 381         \
 382         "spi_updateuboot=echo Updating uboot from " \
 383                 "${serverip}:${image_uboot}...; " \
 384                 "tftpboot ${loadaddr} ${image_uboot} && " \
 385                 "sf probe && sf erase 0 80000 && " \
 386                         "sf write ${loadaddr} 400 ${filesize}\0" \
 387         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 388                 "to ${spi_koffset} ...; " \
 389                 "tftp ${loadaddr} ${image_os} && " \
 390                 "sf probe && " \
 391                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 392         \
 393         "flash_boot=" \
 394                 "if sf probe && " \
 395                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 396                         "setenv bootargs console=${console},${baudrate} " \
 397                                 "root=/dev/mtdblock3 " \
 398                                 "rootfstype=squashfs,jffs2 " \
 399                                 "${video} ${extra}; " \
 400                         "bootm; " \
 401                 "fi\0"
 402 #else
 403         #define CONFIG_EXTRA_ENV_SETTINGS \
 404         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 405         \
 406         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 407         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 408                 "tftp ${loadaddr} ${image_rootfs} && " \
 409                 "nand erase.part rootfs && " \
 410                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 411         \
 412         "flash_boot=" \
 413                 "setenv fsload 'ubifsload'; " \
 414                 "ubi part rootfs; " \
 415                 "if ubi check boot; then " \
 416                         "ubifsmount ubi0:boot; " \
 417                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 418                                 "rootfstype=squashfs,ubifs; " \
 419                         "setenv bootdir; " \
 420                 "elif ubi check rootfs; then " \
 421                         "ubifsmount ubi0:rootfs; " \
 422                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 423                                 "rootfstype=ubifs; " \
 424                 "fi; " \
 425                 "setenv dtype nand; run loadscript; " \
 426                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 427                         "setenv bootargs console=${console},${baudrate} " \
 428                                 "root=${root} ${video} ${extra}; " \
 429                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 430                                 "ubifsumount; " \
 431                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 432                         "else " \
 433                                 "ubifsumount; bootm; " \
 434                         "fi; " \
 435                 "fi\0"
 436 #endif
 437
 438 #define CONFIG_BOOTCOMMAND \
 439         "for btype in ${bootdevs}; do " \
 440                 "echo; echo Attempting ${btype} boot...; " \
 441                 "if run ${btype}_boot; then; fi; " \
 442         "done"
 443
 444 /* Device Tree Support */
 445 #define CONFIG_OF_BOARD_SETUP
 446 #define CONFIG_FDT_FIXUP_PARTITIONS
 447
 448 #endif                         /* __CONFIG_H */