include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 /* Location in NAND to read U-Boot from */
  13 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  14
  15 /* Falcon Mode */
  16 #define CONFIG_CMD_SPL
  17 #define CONFIG_SPL_OS_BOOT
  18 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  19 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  20
  21 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  22 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  23 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  24
  25 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  26 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  27 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  28 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  29
  30 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  31 #include "mx6_common.h"
  32 #undef CONFIG_DISPLAY_BOARDINFO
  33 #define CONFIG_DISPLAY_BOARDINFO_LATE
  34
  35 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  36
  37 /* Serial ATAG */
  38 #define CONFIG_SERIAL_TAG
  39
  40 /* Size of malloc() pool */
  41 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  42
  43 /* Init Functions */
  44 #define CONFIG_BOARD_EARLY_INIT_F
  45 #define CONFIG_MISC_INIT_R
  46
  47 /* Driver Model */
  48 #ifndef CONFIG_SPL_BUILD
  49 #define CONFIG_DM_GPIO
  50 #define CONFIG_DM_THERMAL
  51 #endif
  52
  53 /* Thermal */
  54 #define CONFIG_IMX_THERMAL
  55
  56 /* Serial */
  57 #define CONFIG_MXC_UART
  58 #define CONFIG_MXC_UART_BASE           UART2_BASE
  59
  60 #ifdef CONFIG_SPI_FLASH
  61
  62 /* SPI */
  63 #ifdef CONFIG_CMD_SF
  64   #define CONFIG_MXC_SPI
  65   #define CONFIG_SPI_FLASH_MTD
  66   #define CONFIG_SPI_FLASH_BAR
  67   #define CONFIG_SF_DEFAULT_BUS              0
  68   #define CONFIG_SF_DEFAULT_CS               0
  69                                              /* GPIO 3-19 (21248) */
  70   #define CONFIG_SF_DEFAULT_SPEED            30000000
  71   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  72 #endif
  73
  74 #else
  75 /* Enable NAND support */
  76 #define CONFIG_CMD_NAND
  77 #define CONFIG_CMD_NAND_TRIMFFS
  78 #ifdef CONFIG_CMD_NAND
  79   #define CONFIG_NAND_MXS
  80   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  81   #define CONFIG_SYS_NAND_BASE          0x40000000
  82   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  83   #define CONFIG_SYS_NAND_ONFI_DETECTION
  84
  85   /* DMA stuff, needed for GPMI/MXS NAND support */
  86   #define CONFIG_APBH_DMA
  87   #define CONFIG_APBH_DMA_BURST
  88   #define CONFIG_APBH_DMA_BURST8
  89 #endif
  90
  91 #endif /* CONFIG_SPI_FLASH */
  92
  93 /* I2C Configs */
  94 #define CONFIG_SYS_I2C
  95 #define CONFIG_SYS_I2C_MXC
  96 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  97 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  98 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  99 #define CONFIG_SYS_I2C_SPEED            100000
 100 #define CONFIG_I2C_GSC                  0
 101 #define CONFIG_I2C_PMIC                 1
 102 #define CONFIG_I2C_EDID
 103
 104 /* MMC Configs */
 105 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 106 #define CONFIG_SYS_FSL_USDHC_NUM       1
 107
 108 /* Filesystem support */
 109 #define CONFIG_CMD_UBIFS
 110
 111 /*
 112  * SATA Configs
 113  */
 114 #define CONFIG_CMD_SATA
 115 #ifdef CONFIG_CMD_SATA
 116   #define CONFIG_DWC_AHSATA
 117   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 118   #define CONFIG_DWC_AHSATA_PORT_ID     0
 119   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 120   #define CONFIG_LBA48
 121   #define CONFIG_LIBATA
 122 #endif
 123
 124 /*
 125  * PCI express
 126  */
 127 #define CONFIG_CMD_PCI
 128 #ifdef CONFIG_CMD_PCI
 129 #define CONFIG_PCI
 130 #define CONFIG_PCI_PNP
 131 #define CONFIG_PCI_SCAN_SHOW
 132 #define CONFIG_PCI_FIXUP_DEV
 133 #define CONFIG_PCIE_IMX
 134 #endif
 135
 136 /*
 137  * PMIC
 138  */
 139 #define CONFIG_POWER
 140 #define CONFIG_POWER_I2C
 141 #define CONFIG_POWER_PFUZE100
 142 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 143 #define CONFIG_POWER_LTC3676
 144 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 145
 146 /* Various command support */
 147 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 148 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 149 #define CONFIG_CMD_GSC
 150 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 151 #define CONFIG_CMD_UBI
 152 #define CONFIG_RBTREE
 153
 154 /* Ethernet support */
 155 #define CONFIG_FEC_MXC
 156 #define CONFIG_MII
 157 #define IMX_FEC_BASE             ENET_BASE_ADDR
 158 #define CONFIG_FEC_XCV_TYPE      RGMII
 159 #define CONFIG_FEC_MXC_PHYADDR   0
 160 #define CONFIG_PHYLIB
 161 #define CONFIG_ARP_TIMEOUT       200UL
 162
 163 /* USB Configs */
 164 #define CONFIG_USB_EHCI
 165 #define CONFIG_USB_EHCI_MX6
 166 #define CONFIG_USB_HOST_ETHER
 167 #define CONFIG_USB_ETHER_ASIX
 168 #define CONFIG_USB_ETHER_SMSC95XX
 169 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 170 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 171 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 172 #define CONFIG_MXC_USB_FLAGS      0
 173 #define CONFIG_USB_KEYBOARD
 174 #define CONFIG_USBD_HS
 175 #define CONFIG_USB_ETHER
 176 #define CONFIG_USB_ETH_CDC
 177 #define CONFIG_NETCONSOLE
 178 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 179
 180 /* USB Mass Storage Gadget */
 181 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 182
 183 /* Framebuffer and LCD */
 184 #define CONFIG_VIDEO
 185 #define CONFIG_VIDEO_IPUV3
 186 #define CONFIG_CFB_CONSOLE
 187 #define CONFIG_VGA_AS_SINGLE_DEVICE
 188 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 189 #define CONFIG_VIDEO_LOGO
 190 #define CONFIG_IPUV3_CLK          260000000
 191 #define CONFIG_CMD_HDMIDETECT
 192 #define CONFIG_CONSOLE_MUX
 193 #define CONFIG_IMX_HDMI
 194 #define CONFIG_IMX_VIDEO_SKIP
 195 #define CONFIG_VIDEO_BMP_LOGO
 196 #define CONFIG_SPLASH_SCREEN_ALIGN
 197 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 198
 199 /* Miscellaneous configurable options */
 200 #define CONFIG_HWCONFIG
 201 #define CONFIG_PREBOOT
 202
 203 /* Print Buffer Size */
 204 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 205
 206 /* Memory configuration */
 207 #define CONFIG_SYS_MEMTEST_START       0x10000000
 208 #define CONFIG_SYS_MEMTEST_END         0x10010000
 209 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 210
 211 /* Physical Memory Map */
 212 #define CONFIG_NR_DRAM_BANKS           1
 213 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 214 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 215 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 216 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 217
 218 #define CONFIG_SYS_INIT_SP_OFFSET \
 219         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 220 #define CONFIG_SYS_INIT_SP_ADDR \
 221         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 222
 223 /*
 224  * MTD Command for mtdparts
 225  */
 226 #define CONFIG_LZO
 227 #define CONFIG_CMD_MTDPARTS
 228 #define CONFIG_MTD_DEVICE
 229 #define CONFIG_MTD_PARTITIONS
 230 #ifdef CONFIG_SPI_FLASH
 231 #define MTDIDS_DEFAULT    "nor0=nor"
 232 #define MTDPARTS_DEFAULT  \
 233         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 234 #else
 235 #define MTDIDS_DEFAULT    "nand0=nand"
 236 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 237 #endif
 238
 239 /* Persistent Environment Config */
 240 #ifdef CONFIG_SPI_FLASH
 241 #define CONFIG_ENV_IS_IN_SPI_FLASH
 242 #else
 243 #define CONFIG_ENV_IS_IN_NAND
 244 #endif
 245 #if defined(CONFIG_ENV_IS_IN_MMC)
 246   #define CONFIG_SYS_MMC_ENV_DEV         0
 247   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 248   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 249   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 250 #elif defined(CONFIG_ENV_IS_IN_NAND)
 251   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 252   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 253   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 254   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 255   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 256 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 257   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 258   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 259   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 260   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 261   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 262   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 263   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 264 #endif
 265
 266 /* Environment */
 267 #define CONFIG_IPADDR             192.168.1.1
 268 #define CONFIG_SERVERIP           192.168.1.146
 269
 270 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 271         "pcidisable=1\0" \
 272         "splashpos=m,m\0" \
 273         "usb_pgood_delay=2000\0" \
 274         "console=ttymxc1\0" \
 275         "bootdevs=usb mmc sata flash\0" \
 276         "hwconfig=_UNKNOWN_\0" \
 277         "video=\0" \
 278         \
 279         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 280         "mtdids=" MTDIDS_DEFAULT "\0" \
 281         "disk=0\0" \
 282         "part=1\0" \
 283         \
 284         "fdt_high=0xffffffff\0" \
 285         "fdt_addr=0x18000000\0" \
 286         "initrd_high=0xffffffff\0" \
 287         "fixfdt=" \
 288                 "fdt addr ${fdt_addr}\0" \
 289         "bootdir=boot\0" \
 290         "loadfdt=" \
 291                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 292                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 293                         "run fixfdt; " \
 294                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 295                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 296                         "run fixfdt; " \
 297                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 298                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 299                         "run fixfdt; " \
 300                 "fi\0" \
 301         \
 302         "fs=ext4\0" \
 303         "script=6x_bootscript-ventana\0" \
 304         "loadscript=" \
 305                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 306                         "source ${loadaddr}; " \
 307                 "fi\0" \
 308         \
 309         "uimage=uImage\0" \
 310         "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \
 311         "mmc_boot=" \
 312                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 313                 "mmc dev ${disk} && mmc rescan && " \
 314                 "setenv dtype mmc; run loadscript; " \
 315                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 316                         "setenv bootargs console=${console},${baudrate} " \
 317                                 "root=/dev/mmcblk0p1 rootfstype=${fs} " \
 318                                 "rootwait rw ${video} ${extra}; " \
 319                         "if run loadfdt; then " \
 320                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 321                         "else " \
 322                                 "bootm; " \
 323                         "fi; " \
 324                 "fi\0" \
 325         \
 326         "sata_boot=" \
 327                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 328                 "sata init && " \
 329                 "setenv dtype sata; run loadscript; " \
 330                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 331                         "setenv bootargs console=${console},${baudrate} " \
 332                                 "root=/dev/sda1 rootfstype=${fs} " \
 333                                 "rootwait rw ${video} ${extra}; " \
 334                         "if run loadfdt; then " \
 335                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 336                         "else " \
 337                                 "bootm; " \
 338                         "fi; " \
 339                 "fi\0" \
 340         "usb_boot=" \
 341                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 342                 "usb start && usb dev ${disk} && " \
 343                 "setenv dtype usb; run loadscript; " \
 344                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 345                         "setenv bootargs console=${console},${baudrate} " \
 346                                 "root=/dev/sda1 rootfstype=${fs} " \
 347                                 "rootwait rw ${video} ${extra}; " \
 348                         "if run loadfdt; then " \
 349                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 350                         "else " \
 351                                 "bootm; " \
 352                         "fi; " \
 353                 "fi\0"
 354
 355 #ifdef CONFIG_SPI_FLASH
 356         #define CONFIG_EXTRA_ENV_SETTINGS \
 357         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 358         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 359         "image_uboot=ventana/u-boot_spi.imx\0" \
 360         \
 361         "spi_koffset=0x90000\0" \
 362         "spi_klen=0x200000\0" \
 363         \
 364         "spi_updateuboot=echo Updating uboot from " \
 365                 "${serverip}:${image_uboot}...; " \
 366                 "tftpboot ${loadaddr} ${image_uboot} && " \
 367                 "sf probe && sf erase 0 80000 && " \
 368                         "sf write ${loadaddr} 400 ${filesize}\0" \
 369         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 370                 "to ${spi_koffset} ...; " \
 371                 "tftp ${loadaddr} ${image_os} && " \
 372                 "sf probe && " \
 373                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 374         \
 375         "flash_boot=" \
 376                 "if sf probe && " \
 377                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 378                         "setenv bootargs console=${console},${baudrate} " \
 379                                 "root=/dev/mtdblock3 " \
 380                                 "rootfstype=squashfs,jffs2 " \
 381                                 "${video} ${extra}; " \
 382                         "bootm; " \
 383                 "fi\0"
 384 #else
 385         #define CONFIG_EXTRA_ENV_SETTINGS \
 386         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 387         \
 388         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 389         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 390                 "tftp ${loadaddr} ${image_rootfs} && " \
 391                 "nand erase.part rootfs && " \
 392                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 393         \
 394         "flash_boot=" \
 395                 "setenv fsload 'ubifsload'; " \
 396                 "ubi part rootfs; " \
 397                 "if ubi check boot; then " \
 398                         "ubifsmount ubi0:boot; " \
 399                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 400                                 "rootfstype=squashfs,ubifs; " \
 401                         "setenv bootdir; " \
 402                 "elif ubi check rootfs; then " \
 403                         "ubifsmount ubi0:rootfs; " \
 404                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 405                                 "rootfstype=ubifs; " \
 406                 "fi; " \
 407                 "setenv dtype nand; run loadscript; " \
 408                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 409                         "setenv bootargs console=${console},${baudrate} " \
 410                                 "root=${root} ${video} ${extra}; " \
 411                         "if run loadfdt; then " \
 412                                 "ubifsumount; " \
 413                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 414                         "else " \
 415                                 "ubifsumount; bootm; " \
 416                         "fi; " \
 417                 "fi\0"
 418 #endif
 419
 420 #define CONFIG_BOOTCOMMAND \
 421         "for btype in ${bootdevs}; do " \
 422                 "echo; echo Attempting ${btype} boot...; " \
 423                 "if run ${btype}_boot; then; fi; " \
 424         "done"
 425
 426 /* Device Tree Support */
 427 #define CONFIG_FDT_FIXUP_PARTITIONS
 428
 429 #endif                         /* __CONFIG_H */