include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 #define CONFIG_SPL_NAND_SUPPORT
  13 #define CONFIG_SPL_MMC_SUPPORT
  14 #define CONFIG_SPL_POWER_SUPPORT
  15 /* Location in NAND to read U-Boot from */
  16 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  17
  18 /* Falcon Mode */
  19 #define CONFIG_CMD_SPL
  20 #define CONFIG_SPL_OS_BOOT
  21 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  22 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  23
  24 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  25 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  26 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  27
  28 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  29 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  31 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  32
  33 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  34 #include "mx6_common.h"
  35 #undef CONFIG_SPL_EXT_SUPPORT
  36 #undef CONFIG_DISPLAY_BOARDINFO
  37 #define CONFIG_DISPLAY_BOARDINFO_LATE
  38
  39 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  40
  41 /* Serial ATAG */
  42 #define CONFIG_SERIAL_TAG
  43
  44 /* Size of malloc() pool */
  45 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  46
  47 /* Init Functions */
  48 #define CONFIG_BOARD_EARLY_INIT_F
  49 #define CONFIG_MISC_INIT_R
  50
  51 /* Driver Model */
  52 #ifndef CONFIG_SPL_BUILD
  53 #define CONFIG_DM_GPIO
  54 #define CONFIG_DM_THERMAL
  55 #endif
  56
  57 /* Thermal */
  58 #define CONFIG_IMX_THERMAL
  59
  60 /* Serial */
  61 #define CONFIG_MXC_UART
  62 #define CONFIG_MXC_UART_BASE           UART2_BASE
  63
  64 #ifdef CONFIG_SPI_FLASH
  65
  66 /* SPI */
  67 #ifdef CONFIG_CMD_SF
  68   #define CONFIG_MXC_SPI
  69   #define CONFIG_SPI_FLASH_MTD
  70   #define CONFIG_SPI_FLASH_BAR
  71   #define CONFIG_SF_DEFAULT_BUS              0
  72   #define CONFIG_SF_DEFAULT_CS               0
  73                                              /* GPIO 3-19 (21248) */
  74   #define CONFIG_SF_DEFAULT_SPEED            30000000
  75   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  76 #endif
  77
  78 #else
  79 /* Enable NAND support */
  80 #define CONFIG_CMD_NAND
  81 #define CONFIG_CMD_NAND_TRIMFFS
  82 #ifdef CONFIG_CMD_NAND
  83   #define CONFIG_NAND_MXS
  84   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  85   #define CONFIG_SYS_NAND_BASE          0x40000000
  86   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  87   #define CONFIG_SYS_NAND_ONFI_DETECTION
  88
  89   /* DMA stuff, needed for GPMI/MXS NAND support */
  90   #define CONFIG_APBH_DMA
  91   #define CONFIG_APBH_DMA_BURST
  92   #define CONFIG_APBH_DMA_BURST8
  93 #endif
  94
  95 #endif /* CONFIG_SPI_FLASH */
  96
  97 /* I2C Configs */
  98 #define CONFIG_SYS_I2C
  99 #define CONFIG_SYS_I2C_MXC
 100 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 101 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 102 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 103 #define CONFIG_SYS_I2C_SPEED            100000
 104 #define CONFIG_I2C_GSC                  0
 105 #define CONFIG_I2C_PMIC                 1
 106 #define CONFIG_I2C_EDID
 107
 108 /* MMC Configs */
 109 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 110 #define CONFIG_SYS_FSL_USDHC_NUM       1
 111
 112 /* Filesystem support */
 113 #define CONFIG_CMD_UBIFS
 114
 115 /*
 116  * SATA Configs
 117  */
 118 #define CONFIG_CMD_SATA
 119 #ifdef CONFIG_CMD_SATA
 120   #define CONFIG_DWC_AHSATA
 121   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 122   #define CONFIG_DWC_AHSATA_PORT_ID     0
 123   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 124   #define CONFIG_LBA48
 125   #define CONFIG_LIBATA
 126 #endif
 127
 128 /*
 129  * PCI express
 130  */
 131 #define CONFIG_CMD_PCI
 132 #ifdef CONFIG_CMD_PCI
 133 #define CONFIG_PCI
 134 #define CONFIG_PCI_PNP
 135 #define CONFIG_PCI_SCAN_SHOW
 136 #define CONFIG_PCI_FIXUP_DEV
 137 #define CONFIG_PCIE_IMX
 138 #endif
 139
 140 /*
 141  * PMIC
 142  */
 143 #define CONFIG_POWER
 144 #define CONFIG_POWER_I2C
 145 #define CONFIG_POWER_PFUZE100
 146 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 147 #define CONFIG_POWER_LTC3676
 148 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 149
 150 /* Various command support */
 151 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 152 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 153 #define CONFIG_CMD_GSC
 154 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 155 #define CONFIG_CMD_UBI
 156 #define CONFIG_RBTREE
 157
 158 /* Ethernet support */
 159 #define CONFIG_FEC_MXC
 160 #define CONFIG_MII
 161 #define IMX_FEC_BASE             ENET_BASE_ADDR
 162 #define CONFIG_FEC_XCV_TYPE      RGMII
 163 #define CONFIG_FEC_MXC_PHYADDR   0
 164 #define CONFIG_PHYLIB
 165 #define CONFIG_ARP_TIMEOUT       200UL
 166
 167 /* USB Configs */
 168 #define CONFIG_USB_EHCI
 169 #define CONFIG_USB_EHCI_MX6
 170 #define CONFIG_USB_STORAGE
 171 #define CONFIG_USB_HOST_ETHER
 172 #define CONFIG_USB_ETHER_ASIX
 173 #define CONFIG_USB_ETHER_SMSC95XX
 174 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 175 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 176 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 177 #define CONFIG_MXC_USB_FLAGS      0
 178 #define CONFIG_USB_KEYBOARD
 179 #define CONFIG_USBD_HS
 180 #define CONFIG_USB_ETHER
 181 #define CONFIG_USB_ETH_CDC
 182 #define CONFIG_NETCONSOLE
 183 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 184
 185 /* USB Mass Storage Gadget */
 186 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 187
 188 /* Framebuffer and LCD */
 189 #define CONFIG_VIDEO
 190 #define CONFIG_VIDEO_IPUV3
 191 #define CONFIG_CFB_CONSOLE
 192 #define CONFIG_VGA_AS_SINGLE_DEVICE
 193 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 194 #define CONFIG_VIDEO_BMP_RLE8
 195 #define CONFIG_SPLASH_SCREEN
 196 #define CONFIG_BMP_16BPP
 197 #define CONFIG_VIDEO_LOGO
 198 #define CONFIG_IPUV3_CLK          260000000
 199 #define CONFIG_CMD_HDMIDETECT
 200 #define CONFIG_CONSOLE_MUX
 201 #define CONFIG_IMX_HDMI
 202 #define CONFIG_IMX_VIDEO_SKIP
 203
 204 /* Miscellaneous configurable options */
 205 #define CONFIG_HWCONFIG
 206 #define CONFIG_PREBOOT
 207
 208 /* Print Buffer Size */
 209 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 210
 211 /* Memory configuration */
 212 #define CONFIG_SYS_MEMTEST_START       0x10000000
 213 #define CONFIG_SYS_MEMTEST_END         0x10010000
 214 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 215
 216 /* Physical Memory Map */
 217 #define CONFIG_NR_DRAM_BANKS           1
 218 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 219 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 220 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 221 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 222
 223 #define CONFIG_SYS_INIT_SP_OFFSET \
 224         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 225 #define CONFIG_SYS_INIT_SP_ADDR \
 226         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 227
 228 /*
 229  * MTD Command for mtdparts
 230  */
 231 #define CONFIG_LZO
 232 #define CONFIG_CMD_MTDPARTS
 233 #define CONFIG_MTD_DEVICE
 234 #define CONFIG_MTD_PARTITIONS
 235 #ifdef CONFIG_SPI_FLASH
 236 #define MTDIDS_DEFAULT    "nor0=nor"
 237 #define MTDPARTS_DEFAULT  \
 238         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 239 #else
 240 #define MTDIDS_DEFAULT    "nand0=nand"
 241 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 242 #endif
 243
 244 /* Persistent Environment Config */
 245 #ifdef CONFIG_SPI_FLASH
 246 #define CONFIG_ENV_IS_IN_SPI_FLASH
 247 #else
 248 #define CONFIG_ENV_IS_IN_NAND
 249 #endif
 250 #if defined(CONFIG_ENV_IS_IN_MMC)
 251   #define CONFIG_SYS_MMC_ENV_DEV         0
 252   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 253   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 254   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 255 #elif defined(CONFIG_ENV_IS_IN_NAND)
 256   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 257   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 258   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 259   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 260   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 261 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 262   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 263   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 264   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 265   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 266   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 267   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 268   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 269 #endif
 270
 271 /* Environment */
 272 #define CONFIG_IPADDR             192.168.1.1
 273 #define CONFIG_SERVERIP           192.168.1.146
 274
 275 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 276         "pcidisable=1\0" \
 277         "usb_pgood_delay=2000\0" \
 278         "console=ttymxc1\0" \
 279         "bootdevs=usb mmc sata flash\0" \
 280         "hwconfig=_UNKNOWN_\0" \
 281         "video=\0" \
 282         \
 283         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 284         "mtdids=" MTDIDS_DEFAULT "\0" \
 285         "disk=0\0" \
 286         "part=1\0" \
 287         \
 288         "fdt_high=0xffffffff\0" \
 289         "fdt_addr=0x18000000\0" \
 290         "initrd_high=0xffffffff\0" \
 291         "fixfdt=" \
 292                 "fdt addr ${fdt_addr}\0" \
 293         "bootdir=boot\0" \
 294         "loadfdt=" \
 295                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 296                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 297                         "run fixfdt; " \
 298                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 299                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 300                         "run fixfdt; " \
 301                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 302                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 303                         "run fixfdt; " \
 304                 "fi\0" \
 305         \
 306         "fs=ext4\0" \
 307         "script=6x_bootscript-ventana\0" \
 308         "loadscript=" \
 309                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 310                         "source ${loadaddr}; " \
 311                 "fi\0" \
 312         \
 313         "uimage=uImage\0" \
 314         "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \
 315         "mmc_boot=" \
 316                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 317                 "mmc dev ${disk} && mmc rescan && " \
 318                 "setenv dtype mmc; run loadscript; " \
 319                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 320                         "setenv bootargs console=${console},${baudrate} " \
 321                                 "root=/dev/mmcblk0p1 rootfstype=${fs} " \
 322                                 "rootwait rw ${video} ${extra}; " \
 323                         "if run loadfdt; then " \
 324                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 325                         "else " \
 326                                 "bootm; " \
 327                         "fi; " \
 328                 "fi\0" \
 329         \
 330         "sata_boot=" \
 331                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 332                 "sata init && " \
 333                 "setenv dtype sata; run loadscript; " \
 334                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 335                         "setenv bootargs console=${console},${baudrate} " \
 336                                 "root=/dev/sda1 rootfstype=${fs} " \
 337                                 "rootwait rw ${video} ${extra}; " \
 338                         "if run loadfdt; then " \
 339                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 340                         "else " \
 341                                 "bootm; " \
 342                         "fi; " \
 343                 "fi\0" \
 344         "usb_boot=" \
 345                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 346                 "usb start && usb dev ${disk} && " \
 347                 "setenv dtype usb; run loadscript; " \
 348                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 349                         "setenv bootargs console=${console},${baudrate} " \
 350                                 "root=/dev/sda1 rootfstype=${fs} " \
 351                                 "rootwait rw ${video} ${extra}; " \
 352                         "if run loadfdt; then " \
 353                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 354                         "else " \
 355                                 "bootm; " \
 356                         "fi; " \
 357                 "fi\0"
 358
 359 #ifdef CONFIG_SPI_FLASH
 360         #define CONFIG_EXTRA_ENV_SETTINGS \
 361         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 362         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 363         "image_uboot=ventana/u-boot_spi.imx\0" \
 364         \
 365         "spi_koffset=0x90000\0" \
 366         "spi_klen=0x200000\0" \
 367         \
 368         "spi_updateuboot=echo Updating uboot from " \
 369                 "${serverip}:${image_uboot}...; " \
 370                 "tftpboot ${loadaddr} ${image_uboot} && " \
 371                 "sf probe && sf erase 0 80000 && " \
 372                         "sf write ${loadaddr} 400 ${filesize}\0" \
 373         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 374                 "to ${spi_koffset} ...; " \
 375                 "tftp ${loadaddr} ${image_os} && " \
 376                 "sf probe && " \
 377                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 378         \
 379         "flash_boot=" \
 380                 "if sf probe && " \
 381                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 382                         "setenv bootargs console=${console},${baudrate} " \
 383                                 "root=/dev/mtdblock3 " \
 384                                 "rootfstype=squashfs,jffs2 " \
 385                                 "${video} ${extra}; " \
 386                         "bootm; " \
 387                 "fi\0"
 388 #else
 389         #define CONFIG_EXTRA_ENV_SETTINGS \
 390         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 391         \
 392         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 393         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 394                 "tftp ${loadaddr} ${image_rootfs} && " \
 395                 "nand erase.part rootfs && " \
 396                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 397         \
 398         "flash_boot=" \
 399                 "setenv fsload 'ubifsload'; " \
 400                 "ubi part rootfs; " \
 401                 "if ubi check boot; then " \
 402                         "ubifsmount ubi0:boot; " \
 403                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 404                                 "rootfstype=squashfs,ubifs; " \
 405                         "setenv bootdir; " \
 406                 "elif ubi check rootfs; then " \
 407                         "ubifsmount ubi0:rootfs; " \
 408                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 409                                 "rootfstype=ubifs; " \
 410                 "fi; " \
 411                 "setenv dtype nand; run loadscript; " \
 412                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 413                         "setenv bootargs console=${console},${baudrate} " \
 414                                 "root=${root} ${video} ${extra}; " \
 415                         "if run loadfdt; then " \
 416                                 "ubifsumount; " \
 417                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 418                         "else " \
 419                                 "ubifsumount; bootm; " \
 420                         "fi; " \
 421                 "fi\0"
 422 #endif
 423
 424 #define CONFIG_BOOTCOMMAND \
 425         "for btype in ${bootdevs}; do " \
 426                 "echo; echo Attempting ${btype} boot...; " \
 427                 "if run ${btype}_boot; then; fi; " \
 428         "done"
 429
 430 /* Device Tree Support */
 431 #define CONFIG_FDT_FIXUP_PARTITIONS
 432
 433 #endif                         /* __CONFIG_H */