]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/hawkboard.h
configs: Remove unused CONFIG_BOOTP_DEFAULT
[people/ms/u-boot.git] / include / configs / hawkboard.h
1 /*
2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * Based on davinci_dvevm.h. Original Copyrights follow:
5 *
6 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 /*
15 * Board
16 */
17 #define CONFIG_SYS_USE_NAND 1
18
19 /*
20 * SoC Configuration
21 */
22 #define CONFIG_MACH_DAVINCI_HAWK
23 #define CONFIG_ARM926EJS /* arm926ejs CPU core */
24 #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
25 #define CONFIG_SOC_DA850 /* TI DA850 SoC */
26 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
27 #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
28 #define CONFIG_SYS_OSCIN_FREQ 24000000
29 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
30 #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
31 #define CONFIG_SYS_HZ 1000
32 #define CONFIG_SKIP_LOWLEVEL_INIT
33 #define CONFIG_BOARD_EARLY_INIT_F
34 #define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg"
35
36 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
37 DAVINCI_SYSCFG_SUSPSRC_EMAC | \
38 DAVINCI_SYSCFG_SUSPSRC_I2C | \
39 DAVINCI_SYSCFG_SUSPSRC_SPI1 | \
40 DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
41 DAVINCI_SYSCFG_SUSPSRC_UART2)
42
43 #if defined(CONFIG_UART_U_BOOT)
44 #define CONFIG_SYS_TEXT_BASE 0xc1080000
45 #elif !defined(CONFIG_SPL_BUILD)
46 #define CONFIG_SYS_TEXT_BASE 0xc1180000
47 #endif
48
49 /* Spl */
50 #define CONFIG_SPL
51 #define CONFIG_SPL_FRAMEWORK
52 #define CONFIG_SPL_BOARD_INIT
53 #define CONFIG_SPL_NAND_SUPPORT
54 #define CONFIG_SPL_NAND_BASE
55 #define CONFIG_SPL_NAND_DRIVERS
56 #define CONFIG_SPL_NAND_ECC
57 #define CONFIG_SPL_NAND_SIMPLE
58 #define CONFIG_SPL_LIBGENERIC_SUPPORT /* for udelay and __div64_32 for NAND */
59 #define CONFIG_SPL_SERIAL_SUPPORT
60 #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-hawk.lds"
61 #define CONFIG_SPL_TEXT_BASE 0xc1080000
62 #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
63
64 /*
65 * Memory Info
66 */
67 #define CONFIG_SYS_MALLOC_LEN (1*1024*1024) /* malloc() len */
68 #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE
69 #define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */
70 #define CONFIG_SYS_SDRAM_BASE 0xc0000000
71 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20)
72 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 -\
73 GENERATED_GBL_DATA_SIZE)
74 #define CONFIG_SYS_MONITOR_LEN 0x60000
75
76 /* memtest start addr */
77 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1)
78
79 /* memtest will be run on 16MB */
80 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024)
81
82 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
83
84 /*
85 * Serial Driver info
86 */
87 #define CONFIG_SYS_NS16550
88 #define CONFIG_SYS_NS16550_SERIAL
89 #define CONFIG_SYS_NS16550_REG_SIZE -4
90 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE
91 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
92 #define CONFIG_CONS_INDEX 1
93 #define CONFIG_BAUDRATE 115200
94
95 /*
96 * Network & Ethernet Configuration
97 */
98 #define CONFIG_DRIVER_TI_EMAC
99 #define CONFIG_MII
100 #define CONFIG_BOOTP_DNS
101 #define CONFIG_BOOTP_DNS2
102 #define CONFIG_BOOTP_SEND_HOSTNAME
103 #define CONFIG_NET_RETRY_COUNT 10
104
105 /*
106 * Nand Flash
107 */
108 #ifdef CONFIG_SYS_USE_NAND
109 #define CONFIG_SYS_NO_FLASH
110 #define CONFIG_ENV_IS_IN_NAND
111 #define CONFIG_ENV_SIZE (128 << 10)
112 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
113 #define CONFIG_CLE_MASK 0x10
114 #define CONFIG_ALE_MASK 0x8
115 #define CONFIG_SYS_NAND_USE_FLASH_BBT
116 #define CONFIG_NAND_DAVINCI
117 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
118 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST /* SPL nand driver configuration */
119 #define CFG_DAVINCI_STD_NAND_LAYOUT
120 #define CONFIG_SYS_NAND_CS 3
121 #define CONFIG_SYS_NAND_PAGE_2K
122 /* Max number of NAND devices */
123 #define CONFIG_SYS_MAX_NAND_DEVICE 1
124 #define CONFIG_SYS_NAND_BASE_LIST { 0x62000000, }
125 /* Block 0--not used by bootcode */
126 #define CONFIG_ENV_OFFSET 0x0
127
128 #define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10)
129 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
130 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000
131 #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000
132 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
133 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
134 CONFIG_SYS_NAND_U_BOOT_SIZE - \
135 CONFIG_SYS_MALLOC_LEN - \
136 GENERATED_GBL_DATA_SIZE)
137 #define CONFIG_SYS_NAND_ECCPOS { \
138 24, 25, 26, 27, 28, \
139 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
140 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
141 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
142 59, 60, 61, 62, 63 }
143 #define CONFIG_SYS_NAND_PAGE_COUNT 64
144 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
145 #define CONFIG_SYS_NAND_ECCSIZE 512
146 #define CONFIG_SYS_NAND_ECCBYTES 10
147 #define CONFIG_SYS_NAND_OOBSIZE 64
148
149 #endif /* CONFIG_SYS_USE_NAND */
150
151 /* USB Configs */
152 #define CONFIG_SYS_USB_OHCI_CPU_INIT
153 #define CONFIG_USB_OHCI_NEW
154 #define CONFIG_USB_OHCI_DA8XX
155 #define CONFIG_USB_STORAGE
156 #define CONFIG_DOS_PARTITION
157 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x01E25000
158 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
159 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "hawkboard"
160
161 /*
162 * U-Boot general configuration
163 */
164 #define CONFIG_MISC_INIT_R
165 #define CONFIG_BOOTFILE "uImage" /* Boot file name */
166 #define CONFIG_SYS_PROMPT "hawkboard > " /* Command Prompt */
167 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
168 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
169 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
170 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
171 #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
172 #define CONFIG_VERSION_VARIABLE
173 #define CONFIG_AUTO_COMPLETE
174 #define CONFIG_SYS_HUSH_PARSER
175 #define CONFIG_CMDLINE_EDITING
176 #define CONFIG_SYS_LONGHELP
177 #define CONFIG_CRC32_VERIFY
178 #define CONFIG_MX_CYCLIC
179
180 /*
181 * Linux Information
182 */
183 #define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100)
184 #define CONFIG_CMDLINE_TAG
185 #define CONFIG_SETUP_MEMORY_TAGS
186 #define CONFIG_BOOTARGS \
187 "mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0xc1180000,"\
188 "4M ip=static"
189 #define CONFIG_BOOTDELAY 3
190
191 /*
192 * U-Boot commands
193 */
194 #include <config_cmd_default.h>
195 #define CONFIG_CMD_ENV
196 #define CONFIG_CMD_ASKENV
197 #define CONFIG_CMD_DHCP
198 #define CONFIG_CMD_DIAG
199 #define CONFIG_CMD_MII
200 #define CONFIG_CMD_PING
201 #define CONFIG_CMD_SAVES
202 #define CONFIG_CMD_MEMORY
203 #define CONFIG_CMD_USB
204 #define CONFIG_CMD_EXT2
205
206 #ifdef CONFIG_CMD_BDI
207 #define CONFIG_CLOCKS
208 #endif
209
210 #ifdef CONFIG_SYS_USE_NAND
211 #undef CONFIG_CMD_FLASH
212 #undef CONFIG_CMD_IMLS
213 #define CONFIG_CMD_NAND
214 #endif
215
216 #ifndef CONFIG_DRIVER_TI_EMAC
217 #undef CONFIG_CMD_NET
218 #undef CONFIG_CMD_DHCP
219 #undef CONFIG_CMD_MII
220 #undef CONFIG_CMD_PING
221 #endif
222
223 #endif /* __CONFIG_H */