include/configs/highbank.h

   1 /*
   2  * Copyright 2010-2011 Calxeda, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <config_distro_defaults.h>
  11
  12 #define CONFIG_SYS_DCACHE_OFF
  13
  14 #define CONFIG_SYS_BOOTMAPSZ            (16 << 20)
  15
  16 #define CONFIG_SYS_TIMER_RATE           (150000000/256)
  17 #define CONFIG_SYS_TIMER_COUNTER        (0xFFF34000 + 0x4)
  18 #define CONFIG_SYS_TIMER_COUNTS_DOWN
  19
  20 /*
  21  * Size of malloc() pool
  22  */
  23 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)
  24
  25 #define CONFIG_PL011_SERIAL
  26 #define CONFIG_PL011_CLOCK              150000000
  27 #define CONFIG_PL01x_PORTS              { (void *)(0xFFF36000) }
  28 #define CONFIG_CONS_INDEX               0
  29
  30 #define CONFIG_BAUDRATE                 115200
  31
  32 #define CONFIG_BOOTCOUNT_LIMIT
  33 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
  34 #define CONFIG_SYS_BOOTCOUNT_LE         /* Use little-endian accessors */
  35 #define CONFIG_SYS_BOOTCOUNT_ADDR       0xfff3cf0c
  36
  37 #define CONFIG_MISC_INIT_R
  38 #define CONFIG_LIBATA
  39 #define CONFIG_SCSI_AHCI
  40 #define CONFIG_SCSI_AHCI_PLAT
  41 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     5
  42 #define CONFIG_SYS_SCSI_MAX_LUN         1
  43 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  44                                         CONFIG_SYS_SCSI_MAX_LUN)
  45
  46 #define CONFIG_CALXEDA_XGMAC
  47
  48 /*
  49  * Command line configuration.
  50  */
  51 #define CONFIG_SCSI
  52
  53 #define CONFIG_BOOT_RETRY_TIME          -1
  54 #define CONFIG_RESET_TO_RETRY
  55
  56 /*
  57  * Miscellaneous configurable options
  58  */
  59 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  60 #define CONFIG_SYS_MAXARGS              16      /* max number of cmd args */
  61 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  62 /* Print Buffer Size */
  63 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  64                                          sizeof(CONFIG_SYS_PROMPT)+16)
  65
  66 #define CONFIG_SYS_LOAD_ADDR            0x800000
  67 #define CONFIG_SYS_64BIT_LBA
  68
  69 /*-----------------------------------------------------------------------
  70  * Physical Memory Map
  71  * The DRAM is already setup, so do not touch the DT node later.
  72  */
  73 #define CONFIG_NR_DRAM_BANKS            0
  74 #define PHYS_SDRAM_1_SIZE               (4089 << 20)
  75 #define CONFIG_SYS_MEMTEST_START        0x100000
  76 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1_SIZE - 0x100000)
  77
  78 /* Environment data setup
  79 */
  80 #define CONFIG_ENV_IS_IN_NVRAM
  81 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xfff88000      /* NVRAM base address */
  82 #define CONFIG_SYS_NVRAM_SIZE           0x8000          /* NVRAM size */
  83 #define CONFIG_ENV_SIZE                 0x2000          /* Size of Environ */
  84 #define CONFIG_ENV_ADDR                 CONFIG_SYS_NVRAM_BASE_ADDR
  85
  86 #define CONFIG_SYS_SDRAM_BASE           0x00000000
  87 #define CONFIG_SYS_TEXT_BASE            0x00008000
  88 #define CONFIG_SYS_INIT_SP_ADDR         0x01000000
  89 #define CONFIG_SKIP_LOWLEVEL_INIT
  90
  91 #endif