include/configs/highbank.h

   1 /*
   2  * Copyright 2010-2011 Calxeda, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <config_distro_defaults.h>
  11
  12 #define CONFIG_SYS_DCACHE_OFF
  13 #define CONFIG_SYS_THUMB_BUILD
  14
  15 #define CONFIG_SYS_BOOTMAPSZ            (16 << 20)
  16
  17 #define CONFIG_SYS_TIMER_RATE           (150000000/256)
  18 #define CONFIG_SYS_TIMER_COUNTER        (0xFFF34000 + 0x4)
  19 #define CONFIG_SYS_TIMER_COUNTS_DOWN
  20
  21 /*
  22  * Size of malloc() pool
  23  */
  24 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)
  25
  26 #define CONFIG_PL011_SERIAL
  27 #define CONFIG_PL011_CLOCK              150000000
  28 #define CONFIG_PL01x_PORTS              { (void *)(0xFFF36000) }
  29 #define CONFIG_CONS_INDEX               0
  30
  31 #define CONFIG_BAUDRATE                 115200
  32
  33 #define CONFIG_BOOTCOUNT_LIMIT
  34 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
  35 #define CONFIG_SYS_BOOTCOUNT_LE         /* Use little-endian accessors */
  36 #define CONFIG_SYS_BOOTCOUNT_ADDR       0xfff3cf0c
  37
  38 #define CONFIG_MISC_INIT_R
  39 #define CONFIG_LIBATA
  40 #define CONFIG_SCSI_AHCI
  41 #define CONFIG_SCSI_AHCI_PLAT
  42 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     5
  43 #define CONFIG_SYS_SCSI_MAX_LUN         1
  44 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  45                                         CONFIG_SYS_SCSI_MAX_LUN)
  46
  47 #define CONFIG_CALXEDA_XGMAC
  48
  49 /*
  50  * Command line configuration.
  51  */
  52 #define CONFIG_SCSI
  53
  54 #define CONFIG_BOOT_RETRY_TIME          -1
  55 #define CONFIG_RESET_TO_RETRY
  56
  57 /*
  58  * Miscellaneous configurable options
  59  */
  60 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  61 #define CONFIG_SYS_MAXARGS              16      /* max number of cmd args */
  62 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  63 /* Print Buffer Size */
  64 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  65                                          sizeof(CONFIG_SYS_PROMPT)+16)
  66
  67 #define CONFIG_SYS_LOAD_ADDR            0x800000
  68 #define CONFIG_SYS_64BIT_LBA
  69
  70 /*-----------------------------------------------------------------------
  71  * Physical Memory Map
  72  * The DRAM is already setup, so do not touch the DT node later.
  73  */
  74 #define CONFIG_NR_DRAM_BANKS            0
  75 #define PHYS_SDRAM_1_SIZE               (4089 << 20)
  76 #define CONFIG_SYS_MEMTEST_START        0x100000
  77 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1_SIZE - 0x100000)
  78
  79 /* Environment data setup
  80 */
  81 #define CONFIG_ENV_IS_IN_NVRAM
  82 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xfff88000      /* NVRAM base address */
  83 #define CONFIG_SYS_NVRAM_SIZE           0x8000          /* NVRAM size */
  84 #define CONFIG_ENV_SIZE                 0x2000          /* Size of Environ */
  85 #define CONFIG_ENV_ADDR                 CONFIG_SYS_NVRAM_BASE_ADDR
  86
  87 #define CONFIG_SYS_SDRAM_BASE           0x00000000
  88 #define CONFIG_SYS_TEXT_BASE            0x00008000
  89 #define CONFIG_SYS_INIT_SP_ADDR         0x01000000
  90 #define CONFIG_SKIP_LOWLEVEL_INIT
  91
  92 #endif