]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/iconnect.h
flash: complete CONFIG_SYS_NO_FLASH move with renaming
[people/ms/u-boot.git] / include / configs / iconnect.h
1 /*
2 * (C) Copyright 2009-2012
3 * Wojciech Dubowik <wojciech.dubowik@neratec.com>
4 * Luka Perkov <luka@openwrt.org>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9 #ifndef _CONFIG_ICONNECT_H
10 #define _CONFIG_ICONNECT_H
11
12 /*
13 * High level configuration options
14 */
15 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
16 #define CONFIG_KW88F6281 /* SOC Name */
17 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
18
19 /*
20 * Machine type
21 */
22 #define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT
23
24 /*
25 * Compression configuration
26 */
27 #define CONFIG_BZIP2
28 #define CONFIG_LZMA
29 #define CONFIG_LZO
30
31 /*
32 * Commands configuration
33 */
34 #define CONFIG_SYS_MVFS
35 #define CONFIG_CMD_ENV
36 #define CONFIG_CMD_NAND
37
38 /*
39 * mv-common.h should be defined after CMD configs since it used them
40 * to enable certain macros
41 */
42 #include "mv-common.h"
43
44 /*
45 * Environment variables configuration
46 */
47 #ifdef CONFIG_CMD_NAND
48 #define CONFIG_ENV_IS_IN_NAND
49 #define CONFIG_ENV_SECT_SIZE 0x20000
50 #else
51 #define CONFIG_ENV_IS_NOWHERE
52 #endif
53 #define CONFIG_ENV_SIZE 0x20000
54 #define CONFIG_ENV_OFFSET 0x80000
55
56 /*
57 * Default environment variables
58 */
59 #define CONFIG_BOOTCOMMAND \
60 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
61 "ubi part rootfs; " \
62 "ubifsmount ubi:rootfs; " \
63 "ubifsload 0x800000 ${kernel}; " \
64 "bootm 0x800000"
65
66 #define CONFIG_MTDPARTS \
67 "mtdparts=orion_nand:" \
68 "0x80000@0x0(uboot)," \
69 "0x20000@0x80000(uboot_env)," \
70 "-@0xa0000(rootfs)\0"
71
72 #define CONFIG_EXTRA_ENV_SETTINGS \
73 "console=console=ttyS0,115200\0" \
74 "mtdids=nand0=orion_nand\0" \
75 "mtdparts="CONFIG_MTDPARTS \
76 "kernel=/boot/uImage\0" \
77 "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
78
79 /*
80 * Ethernet driver configuration
81 */
82 #ifdef CONFIG_CMD_NET
83 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
84 #define CONFIG_PHY_BASE_ADR 11
85 #undef CONFIG_RESET_PHY_R
86 #endif /* CONFIG_CMD_NET */
87
88 /*
89 * File system
90 */
91 #define CONFIG_CMD_JFFS2
92 #define CONFIG_CMD_UBIFS
93 #define CONFIG_RBTREE
94 #define CONFIG_MTD_DEVICE
95 #define CONFIG_MTD_PARTITIONS
96 #define CONFIG_CMD_MTDPARTS
97
98 #endif /* _CONFIG_ICONNECT_H */