include/configs/imx31_phycore.h

   1 /*
   2  * (C) Copyright 2004
   3  * Texas Instruments.
   4  * Richard Woodruff <r-woodruff2@ti.com>
   5  * Kshitij Gupta <kshitij@ti.com>
   6  *
   7  * Configuration settings for the phyCORE-i.MX31 board.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 /* High Level Configuration Options */
  18 #define CONFIG_MX31                     /* This is a mx31 */
  19 #define CONFIG_MX31_CLK32       32000
  20
  21
  22 #define CONFIG_DISPLAY_CPUINFO
  23 #define CONFIG_DISPLAY_BOARDINFO
  24
  25 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  26 #define CONFIG_SETUP_MEMORY_TAGS
  27 #define CONFIG_INITRD_TAG
  28
  29 /*
  30  * Size of malloc() pool
  31  */
  32 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 512 * 1024)
  33
  34 /*
  35  * Hardware drivers
  36  */
  37
  38 #define CONFIG_SYS_I2C
  39 #define CONFIG_SYS_I2C_MXC
  40 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  41 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  42 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  43 #define CONFIG_SYS_I2C_CLK_OFFSET       I2C2_CLK_OFFSET
  44
  45 #define CONFIG_MXC_UART
  46 #define CONFIG_MXC_UART_BASE            UART1_BASE
  47
  48 /* allow to overwrite serial and ethaddr */
  49 #define CONFIG_ENV_OVERWRITE
  50 #define CONFIG_CONS_INDEX       1
  51 #define CONFIG_BAUDRATE         115200
  52
  53 /***********************************************************
  54  * Command definition
  55  ***********************************************************/
  56 #define CONFIG_CMD_EEPROM
  57
  58 #define CONFIG_BOOTDELAY        3
  59
  60 #define MTDPARTS_DEFAULT        "mtdparts=physmap-flash.0:128k(uboot)ro," \
  61                                         "1536k(kernel),-(root)"
  62
  63 #define CONFIG_NETMASK          255.255.255.0
  64 #define CONFIG_IPADDR           192.168.23.168
  65 #define CONFIG_SERVERIP         192.168.23.2
  66
  67 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  68         "bootargs_base=setenv bootargs console=ttySMX0,115200\0"        \
  69         "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "       \
  70                 "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"     \
  71         "bootargs_flash=setenv bootargs $(bootargs) "                   \
  72                 "root=/dev/mtdblock2 rootfstype=jffs2\0"                \
  73         "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0"        \
  74         "bootcmd=run bootcmd_net\0"                                     \
  75         "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs;"      \
  76                 "tftpboot 0x80000000 $(uimage);bootm\0"                 \
  77         "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash;"  \
  78                 "bootm 0x80000000\0"                                    \
  79         "unlock=yes\0"                                                  \
  80         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
  81         "prg_uboot=tftpboot 0x80000000 $(uboot);"                       \
  82                 "protect off 0xa0000000 +0x20000;"                      \
  83                 "erase 0xa0000000 +0x20000;"                            \
  84                 "cp.b 0x80000000 0xa0000000 $(filesize)\0"              \
  85         "prg_kernel=tftpboot 0x80000000 $(uimage);"                     \
  86                 "erase 0xa0040000 +0x180000;"                           \
  87                 "cp.b 0x80000000 0xa0040000 $(filesize)\0"              \
  88         "prg_jffs2=tftpboot 0x80000000 $(jffs2);"                       \
  89                 "erase 0xa01c0000 0xa1ffffff;"                          \
  90                 "cp.b 0x80000000 0xa01c0000 $(filesize)\0"              \
  91         "videomode=video=ctfb:x:240,y:320,depth:16,mode:0,"             \
  92                 "pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1,"          \
  93                 "sync:1241513985,vmode:0\0"
  94
  95
  96 #define CONFIG_SMC911X
  97 #define CONFIG_SMC911X_BASE     0xa8000000
  98 #define CONFIG_SMC911X_32_BIT
  99
 100 /*
 101  * Miscellaneous configurable options
 102  */
 103 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 104 /* Console I/O Buffer Size */
 105 #define CONFIG_SYS_CBSIZE               256
 106 /* Print Buffer Size */
 107 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 108                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 109 /* max number of command args */
 110 #define CONFIG_SYS_MAXARGS              16
 111 /* Boot Argument Buffer Size */
 112 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 113
 114 #define CONFIG_SYS_MEMTEST_START        0  /* memtest works on */
 115 #define CONFIG_SYS_MEMTEST_END          0x10000
 116
 117 #define CONFIG_SYS_LOAD_ADDR            0 /* default load address */
 118
 119 #define CONFIG_CMDLINE_EDITING
 120
 121 /*
 122  * Physical Memory Map
 123  */
 124 #define CONFIG_NR_DRAM_BANKS            1
 125 #define PHYS_SDRAM_1                    0x80000000
 126 #define PHYS_SDRAM_1_SIZE               (128 * 1024 * 1024)
 127 #define CONFIG_BOARD_EARLY_INIT_F
 128 #define CONFIG_SYS_TEXT_BASE            0xA0000000
 129
 130 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 131 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 132 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 133 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 134                                                 GENERATED_GBL_DATA_SIZE)
 135 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
 136                                                 CONFIG_SYS_GBL_DATA_OFFSET)
 137
 138 /*
 139  * FLASH and environment organization
 140  */
 141 #define CONFIG_SYS_FLASH_BASE           0xa0000000
 142 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max # of memory banks */
 143 #define CONFIG_SYS_MAX_FLASH_SECT       259     /* max # of sectors/chip */
 144 /* Monitor at beginning of flash */
 145 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 146
 147 #define CONFIG_ENV_IS_IN_EEPROM
 148 #define CONFIG_ENV_OFFSET                       0x00    /* env. starts here */
 149 #define CONFIG_ENV_SIZE                         4096
 150 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x52
 151 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       5       /* 5 bits = 32 octets */
 152 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* 10 ms delay */
 153 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2       /* byte addr. lenght */
 154
 155 /*
 156  * CFI FLASH driver setup
 157  */
 158 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 159 #define CONFIG_FLASH_CFI_DRIVER         /* Use drivers/mtd/cfi_flash.c */
 160 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffered writes (~10x faster) */
 161 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 162
 163 /*
 164  * Timeout for Flash Erase and Flash Write
 165  * timeout values are in ticks
 166  */
 167 #define CONFIG_SYS_FLASH_ERASE_TOUT     (100*CONFIG_SYS_HZ)
 168 #define CONFIG_SYS_FLASH_WRITE_TOUT     (100*CONFIG_SYS_HZ)
 169
 170 /*
 171  * JFFS2 partitions
 172  */
 173 #undef CONFIG_CMD_MTDPARTS
 174 #define CONFIG_JFFS2_DEV        "nor0"
 175
 176 /* EET platform additions */
 177 #ifdef CONFIG_IMX31_PHYCORE_EET
 178 #define CONFIG_BOARD_LATE_INIT
 179
 180 #define CONFIG_MXC_GPIO
 181
 182 #define CONFIG_HARD_SPI
 183 #define CONFIG_MXC_SPI
 184
 185 #define CONFIG_S6E63D6
 186
 187 #define CONFIG_VIDEO
 188 #define CONFIG_CFB_CONSOLE
 189 #define CONFIG_VIDEO_MX3
 190 #define CONFIG_VIDEO_LOGO
 191 #define CONFIG_VIDEO_SW_CURSOR
 192 #define CONFIG_VGA_AS_SINGLE_DEVICE
 193 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 194 #define CONFIG_SPLASH_SCREEN
 195 #define CONFIG_CMD_BMP
 196 #define CONFIG_BMP_16BPP
 197 #endif
 198
 199 #endif /* __CONFIG_H */