include/configs/imx6_spl.h

   1 /*
   2  * Copyright (C) 2014 Gateworks Corporation
   3  * Author: Tim Harvey <tharvey@gateworks.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7 #ifndef __IMX6_SPL_CONFIG_H
   8 #define __IMX6_SPL_CONFIG_H
   9
  10 #ifdef CONFIG_SPL
  11
  12 #define CONFIG_SPL_FRAMEWORK
  13
  14 /*
  15  * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
  16  *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
  17  *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
  18  *  - BOOT ROM stack is at 0x0091FFB8
  19  *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
  20  *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
  21  *    fit between 0x00907000 and 0x00918000.
  22  *  - Additionally the BOOT ROM loads what they consider the firmware image
  23  *    which consists of a 4K header in front of us that contains the IVT, DCD
  24  *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
  25  *    or 64KB
  26  */
  27 #define CONFIG_SPL_LDSCRIPT     "arch/arm/mach-omap2/u-boot-spl.lds"
  28 #define CONFIG_SPL_TEXT_BASE            0x00908000
  29 #define CONFIG_SPL_MAX_SIZE             0x10000
  30 #define CONFIG_SPL_STACK                0x0091FFB8
  31 /*
  32  * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
  33  * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
  34  * boot media (given that boot media specific offset is configured properly).
  35  */
  36 #define CONFIG_SPL_PAD_TO               0x11000
  37
  38 /* MMC support */
  39 #if defined(CONFIG_SPL_MMC_SUPPORT)
  40 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
  41 #define CONFIG_SYS_MONITOR_LEN                  409600  /* 400 KB */
  42 #endif
  43
  44 /* SATA support */
  45 #if defined(CONFIG_SPL_SATA_SUPPORT)
  46 #define CONFIG_SPL_SATA_BOOT_DEVICE             0
  47 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION      1
  48 #endif
  49
  50 /* Define the payload for FAT/EXT support */
  51 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
  52 # ifdef CONFIG_OF_CONTROL
  53 #  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME       "u-boot-dtb.img"
  54 # else
  55 #  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME       "u-boot.img"
  56 # endif
  57 #endif
  58
  59 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL)
  60 #define CONFIG_SPL_BSS_START_ADDR      0x88200000
  61 #define CONFIG_SPL_BSS_MAX_SIZE        0x100000         /* 1 MB */
  62 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000
  63 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000         /* 1 MB */
  64 #define CONFIG_SYS_TEXT_BASE           0x87800000
  65 #else
  66 #define CONFIG_SPL_BSS_START_ADDR       0x18200000
  67 #define CONFIG_SPL_BSS_MAX_SIZE         0x100000        /* 1 MB */
  68 #define CONFIG_SYS_SPL_MALLOC_START     0x18300000
  69 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
  70 #define CONFIG_SYS_TEXT_BASE            0x17800000
  71 #endif
  72 #endif
  73
  74 #endif