include/configs/imx6_spl.h

   1 /*
   2  * Copyright (C) 2014 Gateworks Corporation
   3  * Author: Tim Harvey <tharvey@gateworks.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7 #ifndef __IMX6_SPL_CONFIG_H
   8 #define __IMX6_SPL_CONFIG_H
   9
  10 #ifdef CONFIG_SPL
  11
  12 #define CONFIG_SPL_FRAMEWORK
  13
  14 /*
  15  * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
  16  *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
  17  *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
  18  *  - BOOT ROM stack is at 0x0091FFB8
  19  *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
  20  *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
  21  *    fit between 0x00907000 and 0x00918000.
  22  *  - Additionally the BOOT ROM loads what they consider the firmware image
  23  *    which consists of a 4K header in front of us that contains the IVT, DCD
  24  *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
  25  *    or 64KB
  26  */
  27 #define CONFIG_SYS_THUMB_BUILD
  28 #define CONFIG_SPL_LDSCRIPT     "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
  29 #define CONFIG_SPL_TEXT_BASE            0x00908000
  30 #define CONFIG_SPL_MAX_SIZE             0x10000
  31 #define CONFIG_SPL_STACK                0x0091FFB8
  32 #define CONFIG_SPL_SERIAL_SUPPORT
  33 #define CONFIG_SPL_WATCHDOG_SUPPORT
  34
  35 /* NAND support */
  36 #if defined(CONFIG_SPL_NAND_SUPPORT)
  37 #define CONFIG_SPL_NAND_MXS
  38 #endif
  39
  40 /* MMC support */
  41 #if defined(CONFIG_SPL_MMC_SUPPORT)
  42 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */
  43 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      800 /* 400 KB */
  44 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
  45 #define CONFIG_SYS_MONITOR_LEN  (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024)
  46 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  47 #endif
  48
  49 /* SATA support */
  50 #if defined(CONFIG_SPL_SATA_SUPPORT)
  51 #define CONFIG_SPL_SATA_BOOT_DEVICE             0
  52 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION      1
  53 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  54 #endif
  55
  56 /* Define the payload for FAT/EXT support */
  57 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
  58 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME  "u-boot.img"
  59 #endif
  60
  61 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL)
  62 #define CONFIG_SPL_BSS_START_ADDR      0x88200000
  63 #define CONFIG_SPL_BSS_MAX_SIZE        0x100000         /* 1 MB */
  64 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000
  65 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000         /* 1 MB */
  66 #define CONFIG_SYS_TEXT_BASE           0x87800000
  67 #else
  68 #define CONFIG_SPL_BSS_START_ADDR       0x18200000
  69 #define CONFIG_SPL_BSS_MAX_SIZE         0x100000        /* 1 MB */
  70 #define CONFIG_SYS_SPL_MALLOC_START     0x18300000
  71 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
  72 #define CONFIG_SYS_TEXT_BASE            0x17800000
  73 #endif
  74 #endif
  75
  76 #endif