include/configs/integratorap.h

   1 /*
   2  * (C) Copyright 2003
   3  * Texas Instruments.
   4  * Kshitij Gupta <kshitij@ti.com>
   5  * Configuation settings for the TI OMAP Innovator board.
   6  *
   7  * (C) Copyright 2004
   8  * ARM Ltd.
   9  * Philippe Robin, <philippe.robin@arm.com>
  10  * Configuration for Integrator AP board.
  11  *.
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 #include "integrator-common.h"
  19
  20 /* Integrator/AP-specific configuration */
  21 #define CONFIG_SYS_HZ_CLOCK             24000000        /* Timer 1 is clocked at 24Mhz */
  22
  23 /*
  24  * BOOTP options
  25  */
  26 #define CONFIG_BOOTP_BOOTFILESIZE
  27 #define CONFIG_BOOTP_BOOTPATH
  28 #define CONFIG_BOOTP_GATEWAY
  29 #define CONFIG_BOOTP_HOSTNAME
  30
  31 /*
  32  * Command line configuration.
  33  */
  34 #define CONFIG_BOOTARGS         "root=/dev/mtdblock0 console=ttyAM0 console=tty"
  35 #define CONFIG_BOOTCOMMAND      ""
  36
  37 /* Flash settings */
  38 #define CONFIG_SYS_FLASH_SIZE           0x02000000 /* 32 MiB */
  39 #define CONFIG_SYS_MAX_FLASH_SECT       128
  40 #define CONFIG_ENV_IS_NOWHERE           1
  41 #define CONFIG_ENV_SIZE                 32768
  42
  43 /*-----------------------------------------------------------------------
  44  * PCI definitions
  45  */
  46
  47 #define CONFIG_CMD_PCI
  48 #define CONFIG_PCI_PNP
  49
  50 #define CONFIG_TULIP
  51 #define CONFIG_EEPRO100
  52 #define CONFIG_SYS_RX_ETH_BUFFER        8       /* use 8 rx buffer on eepro100  */
  53
  54 /*-----------------------------------------------------------------------
  55  * There are various dependencies on the core module (CM) fitted
  56  * Users should refer to their CM user guide
  57  * - when porting adjust u-boot/Makefile accordingly
  58  *   to define the necessary CONFIG_ s for the CM involved
  59  * see e.g. integratorcp_CM926EJ-S_config
  60  */
  61 #include "armcoremodule.h"
  62
  63 #endif  /* __CONFIG_H */