include/configs/integratorap.h

   1 /*
   2  * (C) Copyright 2003
   3  * Texas Instruments.
   4  * Kshitij Gupta <kshitij@ti.com>
   5  * Configuation settings for the TI OMAP Innovator board.
   6  *
   7  * (C) Copyright 2004
   8  * ARM Ltd.
   9  * Philippe Robin, <philippe.robin@arm.com>
  10  * Configuration for Integrator AP board.
  11  *.
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 #include "integrator-common.h"
  19
  20 /* Integrator/AP-specific configuration */
  21 #define CONFIG_ARCH_INTEGRATOR
  22 #define CONFIG_SYS_HZ_CLOCK             24000000        /* Timer 1 is clocked at 24Mhz */
  23
  24 /*
  25  * PL010 Configuration
  26  */
  27 #define CONFIG_PL010_SERIAL
  28 #define CONFIG_CONS_INDEX       0
  29 #define CONFIG_BAUDRATE         38400
  30 #define CONFIG_PL01x_PORTS      { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
  31 #define CONFIG_SYS_SERIAL0              0x16000000
  32 #define CONFIG_SYS_SERIAL1              0x17000000
  33
  34
  35 /*
  36  * BOOTP options
  37  */
  38 #define CONFIG_BOOTP_BOOTFILESIZE
  39 #define CONFIG_BOOTP_BOOTPATH
  40 #define CONFIG_BOOTP_GATEWAY
  41 #define CONFIG_BOOTP_HOSTNAME
  42
  43
  44 /*
  45  * Command line configuration.
  46  */
  47 #include <config_cmd_default.h>
  48
  49 #define CONFIG_BOOTDELAY        2
  50 #define CONFIG_BOOTARGS         "root=/dev/mtdblock0 console=ttyAM0 console=tty"
  51 #define CONFIG_BOOTCOMMAND      ""
  52
  53 /*
  54  * Miscellaneous configurable options
  55  */
  56 #define CONFIG_SYS_PROMPT       "Integrator-AP # "      /* Monitor Command Prompt   */
  57
  58 #define CONFIG_SYS_FLASH_BASE   0x24000000
  59
  60 /*-----------------------------------------------------------------------
  61  * FLASH and environment organization
  62  */
  63 #define CONFIG_SYS_FLASH_CFI            1
  64 #define CONFIG_FLASH_CFI_DRIVER         1
  65 #define CONFIG_ENV_IS_NOWHERE
  66 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* max number of memory banks */
  67 /* timeout values are in ticks */
  68 #define CONFIG_SYS_FLASH_ERASE_TOUT     (2*CONFIG_SYS_HZ)       /* Timeout for Flash Erase */
  69 #define CONFIG_SYS_FLASH_WRITE_TOUT     (2*CONFIG_SYS_HZ)       /* Timeout for Flash Write */
  70 #define CONFIG_SYS_MAX_FLASH_SECT       128
  71 #define CONFIG_ENV_SIZE                 32768
  72
  73
  74 /*-----------------------------------------------------------------------
  75  * PCI definitions
  76  */
  77
  78 #define CONFIG_PCI
  79 #define CONFIG_CMD_PCI
  80 #define CONFIG_PCI_PNP
  81
  82 #define CONFIG_NET_MULTI
  83 #define CONFIG_TULIP
  84 #define CONFIG_EEPRO100
  85 #define CONFIG_SYS_RX_ETH_BUFFER        8       /* use 8 rx buffer on eepro100  */
  86
  87
  88 /*-----------------------------------------------------------------------
  89  * There are various dependencies on the core module (CM) fitted
  90  * Users should refer to their CM user guide
  91  * - when porting adjust u-boot/Makefile accordingly
  92  *   to define the necessary CONFIG_ s for the CM involved
  93  * see e.g. integratorcp_CM926EJ-S_config
  94  */
  95 #include "armcoremodule.h"
  96
  97 #endif  /* __CONFIG_H */