include/configs/integratorcp.h

   1 /*
   2  * (C) Copyright 2003
   3  * Texas Instruments.
   4  * Kshitij Gupta <kshitij@ti.com>
   5  * Configuation settings for the TI OMAP Innovator board.
   6  *
   7  * (C) Copyright 2004
   8  * ARM Ltd.
   9  * Philippe Robin, <philippe.robin@arm.com>
  10  * Configuration for Compact Integrator board.
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 #include "integrator-common.h"
  19
  20 /* Integrator CP-specific configuration */
  21 #define CONFIG_ARCH_CINTEGRATOR
  22 #define CONFIG_SYS_HZ_CLOCK             1000000 /* Timer 1 is clocked at 1Mhz */
  23
  24 /*
  25  * Hardware drivers
  26  */
  27 #define CONFIG_SMC91111
  28 #define CONFIG_SMC_USE_32_BIT
  29 #define CONFIG_SMC91111_BASE    0xC8000000
  30 #undef CONFIG_SMC91111_EXT_PHY
  31
  32 /* PL011 configuration */
  33 #define CONFIG_PL011_SERIAL
  34 #define CONFIG_PL011_CLOCK      14745600
  35 #define CONFIG_PL01x_PORTS      { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
  36 #define CONFIG_CONS_INDEX       0
  37 #define CONFIG_BAUDRATE         38400
  38 #define CONFIG_SYS_SERIAL0              0x16000000
  39 #define CONFIG_SYS_SERIAL1              0x17000000
  40
  41 /*
  42  * Command line configuration.
  43  */
  44 #include <config_cmd_default.h>
  45
  46 #define CONFIG_BOOTDELAY        2
  47 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
  48 #define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
  49 #define CONFIG_SERVERIP 192.168.1.100
  50 #define CONFIG_IPADDR 192.168.1.104
  51 #define CONFIG_BOOTFILE "uImage"
  52
  53 /*
  54  * Miscellaneous configurable options
  55  */
  56 #define CONFIG_SYS_PROMPT       "Integrator-CP # "      /* Monitor Command Prompt */
  57
  58 #define PHYS_FLASH_SIZE                 0x01000000      /* 16MB */
  59 #define CONFIG_SYS_MAX_FLASH_SECT       64
  60 #define CONFIG_ENV_IS_IN_FLASH  1
  61 #define CONFIG_SYS_MONITOR_LEN          0x00100000
  62
  63 /*
  64  * Move up the U-Boot & monitor area if more flash is fitted.
  65  * If this U-Boot is to be run on Integrators with varying flash sizes,
  66  * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
  67  * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
  68  * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
  69  * embedded in the boot monitor(s) area
  70  */
  71 #if ( PHYS_FLASH_SIZE == 0x04000000 )
  72
  73 #define CONFIG_ENV_ADDR         0x27F00000
  74 #define CONFIG_SYS_MONITOR_BASE 0x27F40000
  75
  76 #elif (PHYS_FLASH_SIZE == 0x02000000 )
  77
  78 #define CONFIG_ENV_ADDR         0x25F00000
  79 #define CONFIG_SYS_MONITOR_BASE 0x25F40000
  80
  81 #else
  82
  83 #define CONFIG_ENV_ADDR         0x24F00000
  84 #define CONFIG_SYS_MONITOR_BASE 0x27F40000
  85
  86 #endif
  87
  88 #define CONFIG_ENV_SECT_SIZE    0x40000         /* 256KB */
  89 #define CONFIG_ENV_SIZE         8192            /* 8KB */
  90
  91 #endif /* __CONFIG_H */