include/configs/iocon.h

   1 /*
   2  * (C) Copyright 2010
   3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #define CONFIG_405EP            1       /* this is a PPC405 CPU */
  12 #define CONFIG_IOCON            1       /*  on a IoCon board */
  13
  14 #define CONFIG_SYS_TEXT_BASE    0xFFFC0000
  15
  16 /*
  17  * Include common defines/options for all AMCC eval boards
  18  */
  19 #define CONFIG_HOSTNAME         iocon
  20 #define CONFIG_IDENT_STRING     " iocon 0.05"
  21 #include "amcc-common.h"
  22
  23 #define CONFIG_BOARD_EARLY_INIT_F
  24 #define CONFIG_BOARD_EARLY_INIT_R
  25 #define CONFIG_LAST_STAGE_INIT
  26
  27 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
  28
  29 /*
  30  * Configure PLL
  31  */
  32 #define PLLMR0_DEFAULT PLLMR0_266_133_66
  33 #define PLLMR1_DEFAULT PLLMR1_266_133_66
  34
  35 #undef CONFIG_ZERO_BOOTDELAY_CHECK      /* ignore keypress on bootdelay==0 */
  36 #define CONFIG_AUTOBOOT_KEYED           /* use key strings to stop autoboot */
  37 #define CONFIG_AUTOBOOT_STOP_STR " "
  38
  39 /* new uImage format support */
  40 #define CONFIG_FIT
  41 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
  42
  43 #define CONFIG_ENV_IS_IN_FLASH  /* use FLASH for environment vars */
  44
  45 /*
  46  * Default environment variables
  47  */
  48 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  49         CONFIG_AMCC_DEF_ENV                                             \
  50         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
  51         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
  52         "kernel_addr=fc000000\0"                                        \
  53         "fdt_addr=fc1e0000\0"                                           \
  54         "ramdisk_addr=fc200000\0"                                       \
  55         ""
  56
  57 #define CONFIG_PHY_ADDR         4       /* PHY address                  */
  58 #define CONFIG_HAS_ETH0
  59 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ
  60
  61 /*
  62  * Commands additional to the ones defined in amcc-common.h
  63  */
  64 #define CONFIG_CMD_CACHE
  65 #define CONFIG_CMD_FPGAD
  66 #undef CONFIG_CMD_EEPROM
  67
  68 /*
  69  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
  70  */
  71 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0 */
  72
  73 /* SDRAM timings used in datasheet */
  74 #define CONFIG_SYS_SDRAM_CL             3       /* CAS latency */
  75 #define CONFIG_SYS_SDRAM_tRP           20       /* PRECHARGE command period */
  76 #define CONFIG_SYS_SDRAM_tRC           66       /* ACTIVE-to-ACTIVE period */
  77 #define CONFIG_SYS_SDRAM_tRCD          20       /* ACTIVE-to-READ delay */
  78 #define CONFIG_SYS_SDRAM_tRFC          66       /* Auto refresh period */
  79
  80 /*
  81  * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
  82  * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
  83  * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
  84  * The Linux BASE_BAUD define should match this configuration.
  85  *    baseBaud = cpuClock/(uartDivisor*16)
  86  * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  87  * set Linux BASE_BAUD to 403200.
  88  */
  89 #define CONFIG_CONS_INDEX               1       /* Use UART0 */
  90 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK             /* external serial clock */
  91 #undef  CONFIG_SYS_405_UART_ERRATA_59           /* 405GP/CR Rev. D silicon */
  92 #define CONFIG_SYS_BASE_BAUD            691200
  93
  94 /*
  95  * I2C stuff
  96  */
  97 #define CONFIG_SYS_I2C
  98 #define CONFIG_SYS_I2C_PPC4XX
  99 #define CONFIG_SYS_I2C_PPC4XX_CH0
 100 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 101 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0           0x7F
 102
 103 #define CONFIG_SYS_I2C_SPEED            400000
 104
 105 #define CONFIG_PCA953X                  /* NXP PCA9554 */
 106 #define CONFIG_PCA9698                  /* NXP PCA9698 */
 107
 108 /*
 109  * Software (bit-bang) I2C driver configuration
 110  */
 111 #define CONFIG_SYS_I2C_SOFT
 112 #define CONFIG_SYS_I2C_SOFT_SPEED               50000
 113 #define CONFIG_SYS_I2C_SOFT_SLAVE               0x7F
 114 #define I2C_SOFT_DECLARATIONS2
 115 #define CONFIG_SYS_I2C_SOFT_SPEED_2             50000
 116 #define CONFIG_SYS_I2C_SOFT_SLAVE_2             0x7F
 117 #define I2C_SOFT_DECLARATIONS3
 118 #define CONFIG_SYS_I2C_SOFT_SPEED_3             50000
 119 #define CONFIG_SYS_I2C_SOFT_SLAVE_3             0x7F
 120 #define I2C_SOFT_DECLARATIONS4
 121 #define CONFIG_SYS_I2C_SOFT_SPEED_4             50000
 122 #define CONFIG_SYS_I2C_SOFT_SLAVE_4             0x7F
 123
 124 #define CONFIG_SYS_CH7301_I2C                   {1, 2, 3, 4}
 125
 126 #ifndef __ASSEMBLY__
 127 void fpga_gpio_set(unsigned int bus, int pin);
 128 void fpga_gpio_clear(unsigned int bus, int pin);
 129 int fpga_gpio_get(unsigned int bus, int pin);
 130 #endif
 131
 132 #define I2C_ACTIVE      { }
 133 #define I2C_TRISTATE    { }
 134 #define I2C_READ \
 135         (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0)
 136 #define I2C_SDA(bit) \
 137         do { \
 138                 if (bit) \
 139                         fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \
 140                 else \
 141                         fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \
 142         } while (0)
 143 #define I2C_SCL(bit) \
 144         do { \
 145                 if (bit) \
 146                         fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \
 147                 else \
 148                         fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \
 149         } while (0)
 150 #define I2C_DELAY       udelay(25)      /* 1/4 I2C clock duration */
 151
 152 /*
 153  * OSD hardware
 154  */
 155 #define CONFIG_SYS_MPC92469AC
 156 #define CONFIG_SYS_CH7301
 157
 158 /*
 159  * FLASH organization
 160  */
 161 #define CONFIG_SYS_FLASH_CFI            /* The flash is CFI compatible  */
 162 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
 163
 164 #define CONFIG_SYS_FLASH_BASE           0xFC000000
 165 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 166
 167 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks */
 168 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max num of sectors per chip*/
 169
 170 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase/ms */
 171 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write/ms */
 172
 173 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buff'd writes */
 174
 175 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* 'E' for empty sector on flinfo */
 176 #define CONFIG_SYS_FLASH_QUIET_TEST     1       /* no warn upon unknown flash */
 177
 178 #ifdef CONFIG_ENV_IS_IN_FLASH
 179 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector */
 180 #define CONFIG_ENV_ADDR         ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
 181 #define CONFIG_ENV_SIZE         0x2000  /* Total Size of Environment Sector */
 182
 183 /* Address and size of Redundant Environment Sector     */
 184 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 185 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 186 #endif
 187
 188 /*
 189  * PPC405 GPIO Configuration
 190  */
 191 #define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO     Alternate1      */ \
 192 { \
 193 /* GPIO Core 0 */ \
 194 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0   PerBLast */ \
 195 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO1   TS1E */ \
 196 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO2   TS2E */ \
 197 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO3   TS1O */ \
 198 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO4   TS2O */ \
 199 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1      }, /* GPIO5   TS3 */ \
 200 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO6   TS4 */ \
 201 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO7   TS5 */ \
 202 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO8   TS6 */ \
 203 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO9   TrcClk */ \
 204 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10  PerCS1 */ \
 205 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11  PerCS2 */ \
 206 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12  PerCS3 */ \
 207 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13  PerCS4 */ \
 208 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14  PerAddr03 */ \
 209 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15  PerAddr04 */ \
 210 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16  PerAddr05 */ \
 211 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17  IRQ0 */ \
 212 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18  IRQ1 */ \
 213 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19  IRQ2 */ \
 214 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO20  IRQ3 */ \
 215 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO21  IRQ4 */ \
 216 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO22  IRQ5 */ \
 217 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO23  IRQ6 */ \
 218 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24  UART0_DCD */ \
 219 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25  UART0_DSR */ \
 220 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26  UART0_RI */ \
 221 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27  UART0_DTR */ \
 222 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28  UART1_Rx */ \
 223 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29  UART1_Tx */ \
 224 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO30  RejectPkt0 */ \
 225 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO31  RejectPkt1 */ \
 226 } \
 227 }
 228
 229 /*
 230  * Definitions for initial stack pointer and data area (in data cache)
 231  */
 232 /* use on chip memory (OCM) for temperary stack until sdram is tested */
 233 #define CONFIG_SYS_TEMP_STACK_OCM        1
 234
 235 /* On Chip Memory location */
 236 #define CONFIG_SYS_OCM_DATA_ADDR        0xF8000000
 237 #define CONFIG_SYS_OCM_DATA_SIZE        0x1000
 238 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
 239 #define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
 240
 241 #define CONFIG_SYS_GBL_DATA_OFFSET \
 242         (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
 243 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 244
 245 /*
 246  * External Bus Controller (EBC) Setup
 247  */
 248
 249 /* Memory Bank 0 (NOR-FLASH) initialization */
 250 #define CONFIG_SYS_EBC_PB0AP            0xa382a880
 251 #define CONFIG_SYS_EBC_PB0CR            0xFC0DA000
 252
 253 /* Memory Bank 1 (NVRAM) initializatio */
 254 #define CONFIG_SYS_EBC_PB1AP            0x92015480
 255 #define CONFIG_SYS_EBC_PB1CR            0xFB858000
 256
 257 /* Memory Bank 2 (FPGA0) initialization */
 258 #define CONFIG_SYS_FPGA0_BASE           0x7f100000
 259 #define CONFIG_SYS_EBC_PB2AP            0x02825080
 260 #define CONFIG_SYS_EBC_PB2CR            (CONFIG_SYS_FPGA0_BASE | 0x1a000)
 261
 262 #define CONFIG_SYS_FPGA_BASE(k)         CONFIG_SYS_FPGA0_BASE
 263 #define CONFIG_SYS_FPGA_DONE(k)         0x0010
 264
 265 #define CONFIG_SYS_FPGA_COUNT           1
 266
 267 #define CONFIG_SYS_MCLINK_MAX           3
 268
 269 #define CONFIG_SYS_FPGA_PTR \
 270         { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL }
 271
 272 /* Memory Bank 3 (Latches) initialization */
 273 #define CONFIG_SYS_LATCH_BASE           0x7f200000
 274 #define CONFIG_SYS_EBC_PB3AP            0x02025080
 275 #define CONFIG_SYS_EBC_PB3CR            0x7f21a000
 276
 277 #define CONFIG_SYS_LATCH0_RESET         0xffef
 278 #define CONFIG_SYS_LATCH0_BOOT          0xffff
 279 #define CONFIG_SYS_LATCH1_RESET         0xffff
 280 #define CONFIG_SYS_LATCH1_BOOT          0xffff
 281
 282 /*
 283  * OSD Setup
 284  */
 285 #define CONFIG_SYS_MPC92469AC
 286 #define CONFIG_SYS_CH7301
 287 #define CONFIG_SYS_OSD_SCREENS          1
 288
 289 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management */
 290 #define CONFIG_BITBANGMII_MULTI
 291
 292 #endif  /* __CONFIG_H */