include/configs/ipam390.h

   1 /*
   2  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   3  * Based on:
   4  * U-Boot:include/configs/da850evm.h
   5  *
   6  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   7  *
   8  * Based on davinci_dvevm.h. Original Copyrights follow:
   9  *
  10  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 /*
  19  * Board
  20  */
  21 #define CONFIG_DRIVER_TI_EMAC
  22 #define CONFIG_BARIX_IPAM390
  23
  24 /*
  25  * SoC Configuration
  26  */
  27 #define CONFIG_MACH_DAVINCI_DA850_EVM
  28 #define CONFIG_ARM926EJS                /* arm926ejs CPU core */
  29 #define CONFIG_SOC_DA8XX                /* TI DA8xx SoC */
  30 #define CONFIG_SOC_DA850                /* TI DA850 SoC */
  31 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
  32 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  33 #define CONFIG_SYS_OSCIN_FREQ           24000000
  34 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  35 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  36 #define CONFIG_SYS_HZ                   1000
  37 #define CONFIG_SYS_DA850_PLL_INIT
  38 #define CONFIG_SYS_DA850_DDR_INIT
  39 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  40
  41 /*
  42  * Memory Info
  43  */
  44 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 1*1024*1024) /* malloc() len */
  45 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  46 #define PHYS_SDRAM_1_SIZE       (128 << 20) /* SDRAM size 128MB */
  47 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  48
  49 /* memtest start addr */
  50 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  51
  52 /* memtest will be run on 16MB */
  53 #define CONFIG_SYS_MEMTEST_END  (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024)
  54
  55 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  56
  57 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (       \
  58         DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
  59         DAVINCI_SYSCFG_SUSPSRC_UART2 |          \
  60         DAVINCI_SYSCFG_SUSPSRC_UART0 |          \
  61         DAVINCI_SYSCFG_SUSPSRC_EMAC)
  62
  63 /*
  64  * PLL configuration
  65  */
  66 #define CONFIG_SYS_DV_CLKMODE          0
  67 #define CONFIG_SYS_DA850_PLL0_POSTDIV  1
  68 #define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
  69 #define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
  70 #define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
  71 #define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
  72 #define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
  73 #define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
  74 #define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
  75
  76 #define CONFIG_SYS_DA850_PLL1_POSTDIV  1
  77 #define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
  78 #define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
  79 #define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
  80
  81 #define CONFIG_SYS_DA850_PLL0_PLLM     24
  82 #define CONFIG_SYS_DA850_PLL1_PLLM     24
  83
  84 /*
  85  * DDR2 memory configuration
  86  */
  87 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
  88                                         DV_DDR_PHY_EXT_STRBEN | \
  89                                         (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT))
  90 #define CONFIG_SYS_DA850_DDR2_SDRCR     0x00000498
  91
  92 #define CONFIG_SYS_DA850_DDR2_SDBCR2    0x00000004
  93 #define CONFIG_SYS_DA850_DDR2_PBBPR     0x00000020
  94
  95
  96 #define CONFIG_SYS_DA850_DDR2_SDTIMR (          \
  97         (13 << DV_DDR_SDTMR1_RFC_SHIFT) |       \
  98         (2 << DV_DDR_SDTMR1_RP_SHIFT) |         \
  99         (2 << DV_DDR_SDTMR1_RCD_SHIFT) |        \
 100         (2 << DV_DDR_SDTMR1_WR_SHIFT) |         \
 101         (5 << DV_DDR_SDTMR1_RAS_SHIFT) |        \
 102         (8 << DV_DDR_SDTMR1_RC_SHIFT) |         \
 103         (1 << DV_DDR_SDTMR1_RRD_SHIFT) |        \
 104         (1 << DV_DDR_SDTMR1_WTR_SHIFT))
 105
 106 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (         \
 107         (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) |     \
 108         (2 << DV_DDR_SDTMR2_XP_SHIFT) |         \
 109         (0 << DV_DDR_SDTMR2_ODT_SHIFT) |        \
 110         (14 << DV_DDR_SDTMR2_XSNR_SHIFT) |      \
 111         (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) |    \
 112         (1 << DV_DDR_SDTMR2_RTP_SHIFT) |        \
 113         (2 << DV_DDR_SDTMR2_CKE_SHIFT))
 114
 115 #define CONFIG_SYS_DA850_DDR2_SDBCR (           \
 116         (1 << DV_DDR_SDCR_DDR2EN_SHIFT) |       \
 117         (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) |    \
 118         (1 << DV_DDR_SDCR_DDREN_SHIFT) |        \
 119         (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |      \
 120         (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |    \
 121         (2 << DV_DDR_SDCR_CL_SHIFT) |   \
 122         (3 << DV_DDR_SDCR_IBANK_SHIFT) |        \
 123         (2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
 124
 125 #define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \
 126                                 DAVINCI_ABCR_WSTROBE(2) | \
 127                                 DAVINCI_ABCR_WHOLD(0)   | \
 128                                 DAVINCI_ABCR_RSETUP(1)  | \
 129                                 DAVINCI_ABCR_RSTROBE(2) | \
 130                                 DAVINCI_ABCR_RHOLD(1)   | \
 131                                 DAVINCI_ABCR_TA(0)      | \
 132                                 DAVINCI_ABCR_ASIZE_8BIT)
 133
 134
 135 /*
 136  * Serial Driver info
 137  */
 138 #define CONFIG_SYS_NS16550
 139 #define CONFIG_SYS_NS16550_SERIAL
 140 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
 141 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
 142 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
 143 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
 144 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
 145
 146 /*
 147  * Flash & Environment
 148  */
 149 #define CONFIG_NAND_DAVINCI
 150 #define CONFIG_SYS_NO_FLASH
 151 #define CONFIG_ENV_IS_IN_NAND           /* U-Boot env in NAND Flash  */
 152 #define CONFIG_ENV_OFFSET               0x0 /* Block 0--not used by bootcode */
 153 #define CONFIG_ENV_SIZE                 (128 << 10)
 154 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 155 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 156 #define CONFIG_SYS_NAND_PAGE_2K
 157 #define CONFIG_SYS_NAND_CS              3
 158 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 159 #define CONFIG_SYS_NAND_MASK_CLE                0x10
 160 #define CONFIG_SYS_NAND_MASK_ALE                0x8
 161 #undef CONFIG_SYS_NAND_HW_ECC
 162 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 163 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 164 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
 165 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 166 #define CONFIG_SYS_NAND_PAGE_SIZE       (2 << 10)
 167 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 << 10)
 168 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 169 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x120000
 170 #define CONFIG_SYS_NAND_U_BOOT_DST      0xc1080000
 171 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 172 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
 173                                         CONFIG_SYS_NAND_U_BOOT_SIZE - \
 174                                         CONFIG_SYS_MALLOC_LEN -       \
 175                                         GENERATED_GBL_DATA_SIZE)
 176 #define CONFIG_SYS_NAND_ECCPOS          {                               \
 177                         6,   7,  8,  9, 10,     11, 12, 13, 14, 15,     \
 178                         22, 23, 24, 25, 26,     27, 28, 29, 30, 31,     \
 179                         38, 39, 40, 41, 42,     43, 44, 45, 46, 47,     \
 180                         54, 55, 56, 57, 58,     59, 60, 61, 62, 63}
 181 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 182 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 183 #define CONFIG_SYS_NAND_ECCSIZE         512
 184 #define CONFIG_SYS_NAND_ECCBYTES        10
 185 #define CONFIG_SYS_NAND_OOBSIZE         64
 186 #define CONFIG_SPL_NAND_SUPPORT
 187 #define CONFIG_SPL_NAND_BASE
 188 #define CONFIG_SPL_NAND_DRIVERS
 189 #define CONFIG_SPL_NAND_ECC
 190 #define CONFIG_SPL_NAND_SIMPLE
 191 #define CONFIG_SPL_NAND_LOAD
 192
 193 /*
 194  * Network & Ethernet Configuration
 195  */
 196 #ifdef CONFIG_DRIVER_TI_EMAC
 197 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 198 #define CONFIG_BOOTP_DEFAULT
 199 #define CONFIG_BOOTP_DNS
 200 #define CONFIG_BOOTP_DNS2
 201 #define CONFIG_BOOTP_SEND_HOSTNAME
 202 #define CONFIG_NET_RETRY_COUNT  10
 203 #endif
 204
 205 /*
 206  * U-Boot general configuration
 207  */
 208 #define CONFIG_MISC_INIT_R
 209 #define CONFIG_BOARD_EARLY_INIT_F
 210 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 211 #define CONFIG_SYS_PROMPT       "U-Boot > " /* Command Prompt */
 212 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 213 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 214 #define CONFIG_SYS_MAXARGS      16 /* max number of command args */
 215 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 216 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 217 #define CONFIG_VERSION_VARIABLE
 218 #define CONFIG_AUTO_COMPLETE
 219 #define CONFIG_SYS_HUSH_PARSER
 220 #define CONFIG_CMDLINE_EDITING
 221 #define CONFIG_SYS_LONGHELP
 222 #define CONFIG_CRC32_VERIFY
 223 #define CONFIG_MX_CYCLIC
 224
 225 /*
 226  * Linux Information
 227  */
 228 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 229 #define CONFIG_HWCONFIG         /* enable hwconfig */
 230 #define CONFIG_CMDLINE_TAG
 231 #define CONFIG_REVISION_TAG
 232 #define CONFIG_SETUP_MEMORY_TAGS
 233 #define CONFIG_BOOTDELAY        2
 234 #define CONFIG_EXTRA_ENV_SETTINGS \
 235         "defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \
 236                 "root=/dev/mtdblock5 rw noinitrd " \
 237                 "rootfstype=jffs2 noinitrd\0" \
 238         "hwconfig=dsp:wake=yes\0" \
 239         "bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \
 240         "bootfile=uImage\0" \
 241         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"      \
 242         "mtddevname=uboot-env\0" \
 243         "mtddevnum=0\0" \
 244         "mtdids=" MTDIDS_DEFAULT "\0"                           \
 245         "mtdparts=" MTDPARTS_DEFAULT "\0"                       \
 246         "u-boot=/tftpboot/ipam390/u-boot.ais\0"                 \
 247         "upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
 248                 "nand write c0000000 20000 ${filesize}\0"       \
 249         "setbootparms=nand read c0100000 200000 400000;"        \
 250                 "run defbootargs addmtd;"                       \
 251                 "spl export atags c0100000;"                    \
 252                 "nand erase.part bootparms;"                    \
 253                 "nand write c0000100 180000 20000\0"            \
 254         "\0"
 255
 256 /*
 257  * U-Boot commands
 258  */
 259 #include <config_cmd_default.h>
 260 #define CONFIG_CMD_ENV
 261 #define CONFIG_CMD_ASKENV
 262 #define CONFIG_CMD_DHCP
 263 #define CONFIG_CMD_DIAG
 264 #define CONFIG_CMD_MII
 265 #define CONFIG_CMD_PING
 266 #define CONFIG_CMD_SAVES
 267 #define CONFIG_CMD_MEMORY
 268
 269 #ifdef CONFIG_CMD_BDI
 270 #define CONFIG_CLOCKS
 271 #endif
 272
 273 #ifndef CONFIG_DRIVER_TI_EMAC
 274 #undef CONFIG_CMD_NET
 275 #undef CONFIG_CMD_DHCP
 276 #undef CONFIG_CMD_MII
 277 #undef CONFIG_CMD_PING
 278 #endif
 279
 280 #define CONFIG_CMD_NAND
 281 #define CONFIG_CMD_NAND_TRIMFFS
 282
 283 #define CONFIG_CMD_MTDPARTS
 284 #define CONFIG_MTD_DEVICE
 285 #define CONFIG_MTD_PARTITIONS
 286 #define CONFIG_LZO
 287 #define CONFIG_RBTREE
 288 #define CONFIG_CMD_UBI
 289 #define CONFIG_CMD_UBIFS
 290
 291 #define MTDIDS_NAME_STR         "davinci_nand.0"
 292 #define MTDIDS_DEFAULT          "nand0=" MTDIDS_NAME_STR
 293 #define MTDPARTS_DEFAULT        "mtdparts=" MTDIDS_NAME_STR ":" \
 294                                         "128k(u-boot-env),"     \
 295                                         "1408k(u-boot),"        \
 296                                         "128k(bootparms),"      \
 297                                         "384k(factory-info),"   \
 298                                         "4M(kernel),"   \
 299                                         "-(rootfs)"
 300
 301 /* defines for SPL */
 302 #define CONFIG_SPL
 303 #define CONFIG_SPL_FRAMEWORK
 304 #define CONFIG_SPL_BOARD_INIT
 305 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 306                                                 CONFIG_SYS_MALLOC_LEN)
 307 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 308 #define CONFIG_SPL_SERIAL_SUPPORT
 309 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 310 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 311 #define CONFIG_SPL_LDSCRIPT     "board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
 312 #define CONFIG_SPL_STACK        0x8001ff00
 313 #define CONFIG_SPL_TEXT_BASE    0x80000000
 314 #define CONFIG_SPL_MAX_SIZE     0x20000
 315 #define CONFIG_SPL_MAX_FOOTPRINT        32768
 316
 317 /* additions for new relocation code, must added to all boards */
 318 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 319
 320 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 321                                         GENERATED_GBL_DATA_SIZE)
 322
 323 /* add FALCON boot mode */
 324 #define CONFIG_CMD_SPL
 325 #define CONFIG_SPL_OS_BOOT
 326 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
 327 #define CONFIG_SYS_SPL_ARGS_ADDR        LINUX_BOOT_PARAM_ADDR
 328 #define CONFIG_CMD_SPL_NAND_OFS         0x00180000
 329 #define CONFIG_CMD_SPL_WRITE_SIZE       0x400
 330
 331 /* GPIO support */
 332 #define CONFIG_SPL_GPIO_SUPPORT
 333 #define CONFIG_DA8XX_GPIO
 334 #define CONFIG_IPAM390_GPIO_BOOTMODE    ((16 * 7) + 14)
 335
 336 #define CONFIG_SHOW_BOOT_PROGRESS
 337 #define CONFIG_IPAM390_GPIO_LED_RED     ((16 * 7) + 11)
 338 #define CONFIG_IPAM390_GPIO_LED_GREEN   ((16 * 7) + 12)
 339
 340 #endif /* __CONFIG_H */