include/configs/ipek01.h

   1 /*
   2  * (C) Copyright 2006
   3  * MicroSys GmbH
   4  *
   5  * (C) Copyright 2009
   6  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  */
  33
  34 #define CONFIG_MPC5200
  35 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  36 #define CONFIG_MPX5200          1       /* ... on MPX5200 board */
  37 #define CONFIG_MPC5200_DDR      1       /* ... use DDR RAM */
  38 #define CONFIG_IPEK01                   /* Motherboard is ipek01 */
  39
  40 #define CONFIG_SYS_TEXT_BASE    0xfc000000
  41
  42 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33MHz */
  43
  44 #define CONFIG_MISC_INIT_R
  45
  46 #define CONFIG_SYS_CACHELINE_SIZE       32 /* For MPC5xxx CPUs */
  47 #ifdef CONFIG_CMD_KGDB
  48 #define CONFIG_SYS_CACHELINE_SHIFT      5  /* log base 2 of the above value */
  49 #endif
  50
  51 /*
  52  * Serial console configuration
  53  */
  54 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  55 #define CONFIG_BAUDRATE         115200  /* ... at 9600 bps */
  56 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
  57
  58 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
  59
  60 /*
  61  * Video configuration for LIME GDC
  62  */
  63 #define CONFIG_VIDEO
  64 #ifdef CONFIG_VIDEO
  65 #define CONFIG_VIDEO_MB862xx
  66 #define CONFIG_VIDEO_MB862xx_ACCEL
  67 #define VIDEO_FB_16BPP_WORD_SWAP
  68 #define CONFIG_CFB_CONSOLE
  69 #define CONFIG_VIDEO_LOGO
  70 #define CONFIG_VIDEO_BMP_LOGO
  71 #define CONFIG_CONSOLE_EXTRA_INFO
  72 #define CONFIG_VGA_AS_SINGLE_DEVICE
  73 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  74 #define CONFIG_VIDEO_SW_CURSOR
  75 #define CONFIG_SPLASH_SCREEN
  76 #define CONFIG_VIDEO_BMP_GZIP
  77 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)       /* decompressed img */
  78 /* Lime clock frequency */
  79 #define CONFIG_SYS_MB862xx_CCF  0x90000 /* geo 166MHz other 133MHz */
  80 /* SDRAM parameter */
  81 #define CONFIG_SYS_MB862xx_MMR  0x41c767e3
  82 #endif
  83
  84 /*
  85  * PCI Mapping:
  86  * 0x40000000 - 0x4fffffff - PCI Memory
  87  * 0x50000000 - 0x50ffffff - PCI IO Space
  88  */
  89 #define CONFIG_PCI              1
  90 #define CONFIG_PCI_PNP          1
  91 #define CONFIG_PCI_SCAN_SHOW    1
  92
  93 #define CONFIG_PCI_MEM_BUS      0x40000000
  94 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  95 #define CONFIG_PCI_MEM_SIZE     0x10000000
  96
  97 #define CONFIG_PCI_IO_BUS       0x50000000
  98 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  99 #define CONFIG_PCI_IO_SIZE      0x01000000
 100
 101 #define CONFIG_NET_MULTI        1
 102 #define CONFIG_MII              1
 103 #define CONFIG_EEPRO100         1
 104 #define CONFIG_SYS_RX_ETH_BUFFER        8  /* use 8 rx buffer on eepro100  */
 105
 106 /* Partitions */
 107 #define CONFIG_DOS_PARTITION
 108
 109 /* USB */
 110 #define CONFIG_USB_OHCI_NEW
 111 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 112 #define CONFIG_USB_STORAGE
 113
 114 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 115 #define CONFIG_SYS_USB_OHCI_REGS_BASE           MPC5XXX_USB
 116 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "mpc5200"
 117 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
 118
 119 /*
 120  * Command line configuration.
 121  */
 122 #include <config_cmd_default.h>
 123
 124 #ifdef CONFIG_VIDEO
 125 #define CONFIG_CMD_BMP          /* BMP support */
 126 #endif
 127 #define CONFIG_CMD_DATE         /* support for RTC, date/time...*/
 128 #define CONFIG_CMD_DHCP         /* DHCP Support */
 129 #define CONFIG_CMD_FAT          /* FAT support */
 130 #define CONFIG_CMD_I2C          /* I2C serial bus support */
 131 #define CONFIG_CMD_IDE          /* IDE harddisk support */
 132 #define CONFIG_CMD_IRQ          /* irqinfo */
 133 #define CONFIG_CMD_MII          /* MII support */
 134 #define CONFIG_CMD_PCI          /* pciinfo */
 135 #define CONFIG_CMD_USB          /* USB Support */
 136
 137 #define CONFIG_SYS_LOWBOOT      1
 138
 139 /*
 140  * Autobooting
 141  */
 142 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
 143
 144 #define CONFIG_PREBOOT  "echo;" \
 145         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 146         "echo"
 147
 148 #undef  CONFIG_BOOTARGS
 149
 150 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 151         "netdev=eth0\0"                                                 \
 152         "consoledev=ttyPSC0\0"                                          \
 153         "hostname=ipek01\0"                                             \
 154         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 155                 "nfsroot=${serverip}:${rootpath}\0"                     \
 156         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 157         "addip=setenv bootargs ${bootargs} "                            \
 158                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 159                 ":${hostname}:${netdev}:off panic=1\0"                  \
 160         "addtty=setenv bootargs ${bootargs} "                           \
 161                 "console=${consoledev},${baudrate}\0"                   \
 162         "flash_nfs=run nfsargs addip addtty;"                           \
 163                 "bootm ${kernel_addr} - ${fdtaddr}\0"                   \
 164         "flash_self=run ramargs addip addtty;"                          \
 165                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0"     \
 166         "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};"  \
 167                 "run nfsargs addip addtty;"                             \
 168                  "bootm ${loadaddr} - ${fdtaddr}\0"                     \
 169         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 170         "bootfile=ipek01/uImage\0"                                      \
 171         "load=tftp 100000 ipek01/u-boot.bin\0"                          \
 172         "update=protect off FC000000 +60000; era FC000000 +60000; "     \
 173                 "cp.b 100000 FC000000 ${filesize}\0"                    \
 174         "upd=run load;run update\0"                                     \
 175         "fdtaddr=800000\0"                                              \
 176         "loadaddr=400000\0"                                             \
 177         "fdtfile=ipek01/ipek01.dtb\0"                                   \
 178         ""
 179
 180 #define CONFIG_BOOTCOMMAND      "run flash_self"
 181
 182 /*
 183  * IPB Bus clocking configuration.
 184  */
 185 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* for 133MHz */
 186 /* PCI clock must be 33, because board will not boot */
 187 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2     /* for 66MHz */
 188
 189 /*
 190  * Open firmware flat tree support
 191  */
 192 #define CONFIG_OF_LIBFDT        1
 193 #define CONFIG_OF_BOARD_SETUP   1
 194
 195 #define OF_CPU                  "PowerPC,5200@0"
 196 #define OF_SOC                  "soc5200@f0000000"
 197 #define OF_TBCLK                (bd->bi_busfreq / 4)
 198
 199 /*
 200  * I2C configuration
 201  */
 202 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 203 #define CONFIG_SYS_I2C_MODULE   2       /* Select I2C module #1 or #2 */
 204
 205 #define CONFIG_SYS_I2C_SPEED    100000  /* 100 kHz */
 206 #define CONFIG_SYS_I2C_SLAVE    0x7F
 207
 208 /*
 209  * EEPROM configuration
 210  */
 211 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 212 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 213 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
 214 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 215
 216 /*
 217  * RTC configuration
 218  */
 219 #define CONFIG_RTC_PCF8563
 220 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 221
 222 #define CONFIG_SYS_FLASH_BASE           0xFC000000
 223 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 224 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + \
 225                                          CONFIG_SYS_MONITOR_LEN)
 226
 227 #define CONFIG_SYS_MAX_FLASH_BANKS      1    /* max num of memory banks */
 228 #define CONFIG_SYS_MAX_FLASH_SECT       256  /* max num of sects on one chip */
 229 #define CONFIG_SYS_FLASH_PROTECTION  /* "Real" (hardware) sectors protection */
 230
 231 /* use CFI flash driver */
 232 #define CONFIG_FLASH_CFI_DRIVER
 233 #define CONFIG_SYS_FLASH_CFI
 234 #define CONFIG_SYS_FLASH_EMPTY_INFO
 235 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
 236
 237 /*
 238  * Environment settings
 239  */
 240 #define CONFIG_ENV_IS_IN_FLASH          1
 241 #define CONFIG_ENV_SIZE                 0x10000
 242 #define CONFIG_ENV_SECT_SIZE            0x20000
 243 #define CONFIG_ENV_OVERWRITE            1
 244 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 245 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 246
 247 /*
 248  * Memory map
 249  */
 250 #define CONFIG_SYS_MBAR                 0xf0000000
 251 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 252 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 253 #define CONFIG_SYS_SRAM_BASE            0xF1000000
 254 #define CONFIG_SYS_SRAM_SIZE            0x00200000
 255 #define CONFIG_SYS_LIME_BASE            0xE4000000
 256 #define CONFIG_SYS_LIME_SIZE            0x04000000
 257 #define CONFIG_SYS_FPGA_BASE            0xC0000000
 258 #define CONFIG_SYS_FPGA_SIZE            0x10000000
 259 #define CONFIG_SYS_MPEG_BASE            0xe2000000
 260 #define CONFIG_SYS_MPEG_SIZE            0x01000000
 261 #define CONFIG_SYS_CF_BASE              0xe1000000
 262 #define CONFIG_SYS_CF_SIZE              0x01000000
 263
 264 /* Use SRAM until RAM will be available */
 265 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 266 /* End of used area in DPRAM */
 267 #define CONFIG_SYS_INIT_RAM_SIZE                MPC5XXX_SRAM_SIZE
 268
 269 /* size in bytes reserved for initial data */
 270 #define CONFIG_SYS_GBL_DATA_SIZE        128
 271
 272 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 273                                          CONFIG_SYS_GBL_DATA_SIZE)
 274 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 275
 276 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 277 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 278 #   define CONFIG_SYS_RAMBOOT           1
 279 #endif
 280
 281 #define CONFIG_SYS_MONITOR_LEN  (384 << 10)  /* Reserve 384 kB for Monitor */
 282 #define CONFIG_SYS_MALLOC_LEN   (4 << 20)    /* Reserve 128 kB for malloc() */
 283 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)    /* Initial Memory map for Linux */
 284
 285 /*
 286  * Ethernet configuration
 287  */
 288 #define CONFIG_MPC5xxx_FEC              1
 289 #define CONFIG_MPC5xxx_FEC_MII100
 290 #define CONFIG_PHY_ADDR                 0x00
 291
 292 /*
 293  * GPIO configuration
 294  */
 295 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1d556624
 296
 297 /*
 298  * Miscellaneous configurable options
 299  */
 300 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 301 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt */
 302 #ifdef CONFIG_CMD_KGDB
 303 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 304 #else
 305 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 306 #endif
 307 /* Print Buffer Size */
 308 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 309                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 310 /* max number of command args */
 311 #define CONFIG_SYS_MAXARGS              16
 312 /* Boot Argument Buffer Size */
 313 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 314
 315 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 316 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1...15 MB in DRAM */
 317
 318 #define CONFIG_SYS_LOAD_ADDR            0x100000 /* default load address */
 319
 320 #define CONFIG_SYS_HZ                   1000 /* decrementer freq: 1 ms ticks */
 321 #define CONFIG_LOOPW
 322
 323 /*
 324  * Various low-level settings
 325  */
 326 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 327 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 328
 329 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 330 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 331 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 332 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 333 #define CONFIG_SYS_CS1_START            CONFIG_SYS_SRAM_BASE
 334 #define CONFIG_SYS_CS1_SIZE             CONFIG_SYS_SRAM_SIZE
 335 #define CONFIG_SYS_CS3_START            CONFIG_SYS_LIME_BASE
 336 #define CONFIG_SYS_CS3_SIZE             CONFIG_SYS_LIME_SIZE
 337 #define CONFIG_SYS_CS6_START            CONFIG_SYS_FPGA_BASE
 338 #define CONFIG_SYS_CS6_SIZE             CONFIG_SYS_FPGA_SIZE
 339 #define CONFIG_SYS_CS5_START            CONFIG_SYS_CF_BASE
 340 #define CONFIG_SYS_CS5_SIZE             CONFIG_SYS_CF_SIZE
 341 #define CONFIG_SYS_CS7_START            CONFIG_SYS_MPEG_BASE
 342 #define CONFIG_SYS_CS7_SIZE             CONFIG_SYS_MPEG_SIZE
 343
 344 #ifdef CONFIG_SYS_PCISPEED_66
 345 #define CONFIG_SYS_BOOTCS_CFG           0x0006F900
 346 #define CONFIG_SYS_CS1_CFG              0x0004FB00
 347 #define CONFIG_SYS_CS2_CFG              0x0006F900
 348 #else
 349 #define CONFIG_SYS_BOOTCS_CFG           0x0002F900
 350 #define CONFIG_SYS_CS1_CFG              0x0001FB00
 351 #define CONFIG_SYS_CS2_CFG              0x0002F90C
 352 #endif
 353
 354 /*
 355  * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0
 356  * waitstates, writeswap and readswap enabled
 357  */
 358 #define CONFIG_SYS_CS3_CFG              0x00FFFB0C
 359 #define CONFIG_SYS_CS6_CFG              0x00FFFB0C
 360 #define CONFIG_SYS_CS7_CFG              0x4040751C
 361
 362 #define CONFIG_SYS_CS_BURST             0x00000000
 363 #define CONFIG_SYS_CS_DEADCYCLE         0x33330000
 364
 365 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 366
 367 /*-----------------------------------------------------------------------
 368  * USB stuff
 369  *-----------------------------------------------------------------------
 370  */
 371 #define CONFIG_USB_CLOCK                0x0001BBBB
 372 #define CONFIG_USB_CONFIG               0x00005000
 373
 374 /*-----------------------------------------------------------------------
 375  * IDE/ATA stuff Supports IDE harddisk
 376  *-----------------------------------------------------------------------
 377  */
 378 #define CONFIG_IDE_PREINIT
 379
 380 #define CONFIG_SYS_IDE_MAXBUS           1 /* max. 1 IDE bus */
 381 #define CONFIG_SYS_IDE_MAXDEVICE        2 /* max. 2 drives per IDE bus */
 382
 383 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 384
 385 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 386
 387 /* Offset for data I/O */
 388 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 389
 390 /* Offset for normal register accesses */
 391 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 392
 393 /* Offset for alternate registers */
 394 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 395
 396 /* Interval between registers */
 397 #define CONFIG_SYS_ATA_STRIDE           4
 398
 399 #endif /* __CONFIG_H */