]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/kc1.h
f172472afd0231281a2b5b65ca304090c1ff8a5a
[people/ms/u-boot.git] / include / configs / kc1.h
1 /*
2 * Amazon Kindle Fire (first generation) codename kc1 config
3 *
4 * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
14
15 /*
16 * Build
17 */
18
19 /*
20 * CPU
21 */
22
23 #define CONFIG_SYS_L2_PL310 1
24 #define CONFIG_SYS_PL310_BASE 0x48242000
25
26 /*
27 * Board
28 */
29
30 #define CONFIG_MISC_INIT_R
31
32 /*
33 * Clocks
34 */
35
36 #define CONFIG_SYS_TIMERBASE GPT2_BASE
37 #define CONFIG_SYS_PTV 2
38
39 /*
40 * DRAM
41 */
42
43 #define CONFIG_NR_DRAM_BANKS 1
44
45 /*
46 * Memory
47 */
48
49 #define CONFIG_SYS_SDRAM_BASE 0x80000000
50 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
51 GENERATED_GBL_DATA_SIZE)
52
53 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
54
55 /*
56 * I2C
57 */
58
59 #define CONFIG_SYS_I2C
60 #define CONFIG_I2C_MULTI_BUS
61
62 /*
63 * Power
64 */
65
66 #define CONFIG_TWL6030_POWER
67
68 /*
69 * Input
70 */
71
72 #define CONFIG_TWL6030_INPUT
73
74 /*
75 * SPL
76 */
77
78 #define CONFIG_SPL_FRAMEWORK
79
80 #define CONFIG_SPL_TEXT_BASE 0x40300000
81 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
82 CONFIG_SPL_TEXT_BASE)
83 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
84 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
85 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
86 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
87
88 /*
89 * Console
90 */
91
92 #define CONFIG_AUTO_COMPLETE
93
94 #define CONFIG_SYS_LONGHELP
95
96 #define CONFIG_SYS_CBSIZE 512
97
98 /*
99 * Serial
100 */
101
102 #define CONFIG_SYS_NS16550_SERIAL
103 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
104 #define CONFIG_SYS_NS16550_CLK 48000000
105 #define CONFIG_SYS_NS16550_COM3 UART3_BASE
106 #define CONFIG_CONS_INDEX 3
107
108 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
109 115200 }
110
111 /*
112 * USB gadget
113 */
114
115 /*
116 * Environment
117 */
118
119 #define CONFIG_ENV_SIZE (128 * 1024)
120
121 #define CONFIG_ENV_OVERWRITE
122
123 #define CONFIG_EXTRA_ENV_SETTINGS \
124 "kernel_addr_r=0x82000000\0" \
125 "loadaddr=0x82000000\0" \
126 "fdt_addr_r=0x88000000\0" \
127 "fdtaddr=0x88000000\0" \
128 "ramdisk_addr_r=0x88080000\0" \
129 "pxefile_addr_r=0x80100000\0" \
130 "scriptaddr=0x80000000\0" \
131 "bootm_size=0x10000000\0" \
132 "boot_mmc_dev=0\0" \
133 "kernel_mmc_part=7\0" \
134 "recovery_mmc_part=5\0" \
135 "fdtfile=omap4-kc1.dtb\0" \
136 "bootfile=/boot/extlinux/extlinux.conf\0" \
137 "bootargs=console=ttyO2,115200 mem=512M\0"
138
139 /*
140 * ATAGs
141 */
142
143 #define CONFIG_SETUP_MEMORY_TAGS
144 #define CONFIG_CMDLINE_TAG
145 #define CONFIG_INITRD_TAG
146 #define CONFIG_REVISION_TAG
147 #define CONFIG_SERIAL_TAG
148
149 /*
150 * Boot
151 */
152
153 #define CONFIG_SYS_LOAD_ADDR 0x82000000
154
155 #define CONFIG_BOOTCOMMAND \
156 "setenv boot_mmc_part ${kernel_mmc_part}; " \
157 "if test reboot-${reboot-mode} = reboot-r; then " \
158 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
159 "if test reboot-${reboot-mode} = reboot-b; then " \
160 "echo fastboot; fastboot 0; fi; " \
161 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
162 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
163 "mmc dev ${boot_mmc_dev}; " \
164 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
165 "bootm ${kernel_addr_r};"
166
167 /*
168 * Defaults
169 */
170
171 #include <config_defaults.h>
172 #include <config_distro_defaults.h>
173
174 #endif