include/configs/km/keymile-common.h

   1 /*
   2  * (C) Copyright 2008-2011
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_KEYMILE_H
   9 #define __CONFIG_KEYMILE_H
  10
  11 #define CONFIG_BOOTCOUNT_LIMIT
  12
  13 /*
  14  * Command line configuration.
  15  */
  16 #define CONFIG_CMD_DEFAULTENV_VARS
  17 #define CONFIG_CMD_IMMAP
  18 #define CONFIG_CMD_EEPROM
  19 #define CONFIG_CMD_JFFS2
  20 #define CONFIG_CMD_MTDPARTS
  21
  22 #undef  CONFIG_WATCHDOG         /* disable platform specific watchdog */
  23
  24 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
  25
  26 /*
  27  * Miscellaneous configurable options
  28  */
  29 #define CONFIG_SYS_LONGHELP                     /* undef to save memory   */
  30 #if defined(CONFIG_CMD_KGDB)
  31 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  32 #else
  33 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size  */
  34 #endif
  35 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
  36 #define CONFIG_SYS_MAXARGS              32 /* max number of command args */
  37 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  38 #define CONFIG_CMDLINE_EDITING
  39 #define CONFIG_AUTO_COMPLETE
  40
  41 #define CONFIG_HUSH_INIT_VAR
  42
  43 #define CONFIG_SYS_ALT_MEMTEST          /* memory test, takes time */
  44
  45 #define CONFIG_BAUDRATE                 115200
  46 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
  47
  48 #define CONFIG_LOADS_ECHO
  49 #define CONFIG_SYS_LOADS_BAUD_CHANGE
  50
  51
  52 /* Support the IVM EEprom */
  53 #define CONFIG_SYS_IVM_EEPROM_ADR       0x50
  54 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN   0x400
  55 #define CONFIG_SYS_IVM_EEPROM_PAGE_LEN  0x100
  56
  57 #define CONFIG_SYS_FLASH_PROTECTION
  58
  59 /*
  60  * BOOTP options
  61  */
  62 #define CONFIG_BOOTP_BOOTFILESIZE
  63 #define CONFIG_BOOTP_BOOTPATH
  64 #define CONFIG_BOOTP_GATEWAY
  65 #define CONFIG_BOOTP_HOSTNAME
  66
  67 /* UBI Support for all Keymile boards */
  68 #define CONFIG_CMD_UBI
  69 #define CONFIG_RBTREE
  70 #define CONFIG_MTD_PARTITIONS
  71 #define CONFIG_MTD_DEVICE
  72 #define CONFIG_MTD_CONCAT
  73
  74 #define CONFIG_CMD_CRAMFS
  75
  76 #ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
  77 #define CONFIG_KM_DEF_ENV_BOOTPARAMS \
  78         "actual_bank=0\0"
  79 #endif
  80
  81 #ifndef CONFIG_KM_DEF_NETDEV
  82 #define CONFIG_KM_DEF_NETDEV    \
  83         "netdev=eth0\0"
  84 #endif
  85
  86 #ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT
  87 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT       "ubi0"
  88 #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */
  89
  90 #ifndef CONFIG_KM_UBI_PART_BOOT_OPTS
  91 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ""
  92 #endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */
  93
  94 #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP
  95 /* one flash chip only called boot */
  96 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
  97 # define CONFIG_KM_UBI_LINUX_MTD                                        \
  98         "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT                    \
  99         CONFIG_KM_UBI_PART_BOOT_OPTS
 100 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI                               \
 101         "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0"
 102 #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */
 103 /* two flash chips called boot and app */
 104 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
 105 /* app:  CONFIG_KM_UBI_PARTITION_NAME_APP */
 106 # define CONFIG_KM_UBI_LINUX_MTD                                        \
 107         "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT                    \
 108         CONFIG_KM_UBI_PART_BOOT_OPTS " "                                \
 109         "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP
 110 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI                               \
 111         "ubiattach=if test ${boot_bank} -eq 0; then; "                  \
 112         "ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; "        \
 113         "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
 114 #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
 115
 116 #ifdef CONFIG_NAND_ECC_BCH
 117 #define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
 118 #define CONFIG_KM_ECC_MODE    " eccmode=bch"
 119 #else
 120 #define CONFIG_KM_UIMAGE_NAME "uImage\0"
 121 #define CONFIG_KM_ECC_MODE
 122 #endif
 123
 124 /*
 125  * boottargets
 126  * - set 'subbootcmds'
 127  * - set 'bootcmd' and 'altbootcmd'
 128  * available targets:
 129  * - 'release': for a standalone system         kernel/rootfs from flash
 130  */
 131 #define CONFIG_KM_DEF_ENV_BOOTTARGETS                                   \
 132         "subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt "         \
 133                 "set_fdthigh cramfsloadkernel flashargs add_default "   \
 134                 "addpanic boot\0"                                       \
 135         "develop="                                                      \
 136                 "tftp 200000 scripts/develop-${arch}.txt && "           \
 137                 "env import -t 200000 ${filesize} && "                  \
 138                 "run setup_debug_env\0"                                 \
 139         "ramfs="                                                        \
 140                 "tftp 200000 scripts/ramfs-${arch}.txt && "             \
 141                 "env import -t 200000 ${filesize} && "                  \
 142                 "run setup_debug_env\0"                                 \
 143         ""
 144
 145 /*
 146  * bootargs
 147  * - modify 'bootargs'
 148  *
 149  * - 'add_default': default bootargs common for all arm/ppc boards
 150  * - 'addpanic': add kernel panic options
 151  * - 'flashargs': defaults arguments for flash base boot
 152  *
 153  */
 154 #define CONFIG_KM_DEF_ENV_BOOTARGS                                      \
 155         "add_default="                                                  \
 156                 "setenv bootargs ${bootargs} "                          \
 157                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 158                 ":${hostname}:${netdev}:off:"                           \
 159                 " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}"        \
 160                 " mem=${kernelmem} init=${init}"                        \
 161                 CONFIG_KM_ECC_MODE                                      \
 162                 " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
 163                 " " CONFIG_KM_UBI_LINUX_MTD " "                         \
 164                 CONFIG_KM_DEF_BOOT_ARGS_CPU                             \
 165                 "\0"                                                    \
 166         "addpanic="                                                     \
 167                 "setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0" \
 168         "flashargs="                                                    \
 169                 "setenv bootargs "                                      \
 170                 "root=mtdblock:rootfs${boot_bank} "                     \
 171                 "rootfstype=squashfs ro\0"                              \
 172         ""
 173
 174 /*
 175  * flash_boot
 176  * - commands for booting from flash
 177  *
 178  * - 'cramfsloadkernel': copy kernel from a cramfs to ram
 179  * - 'ubiattach': attach ubi partition
 180  * - 'ubicopy': copy ubi volume to ram
 181  *              - volume names: bootfs0, bootfs1, bootfs2, ...
 182  *
 183  * processor specific settings
 184  * - 'cramfsloadfdt': copy fdt from a cramfs to ram
 185  */
 186 #define CONFIG_KM_DEF_ENV_FLASH_BOOT                                    \
 187         "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0"           \
 188         "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0"        \
 189         "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR)           \
 190                         " bootfs${boot_bank}\0"                         \
 191         "uimage=" CONFIG_KM_UIMAGE_NAME                                 \
 192         CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
 193
 194 /*
 195  * constants
 196  * - KM specific constants and commands
 197  *
 198  * - 'default': setup default environment
 199  */
 200 #define CONFIG_KM_DEF_ENV_CONSTANTS                                     \
 201         "backup_bank=0\0"                                               \
 202         "release=run newenv; reset\0"                                   \
 203         "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0"                \
 204         "testbootcmd=setenv boot_bank ${test_bank}; "                   \
 205                 "run ${subbootcmds}; reset\0"                           \
 206         ""
 207
 208 #ifndef CONFIG_KM_DEF_ENV
 209 #define CONFIG_KM_DEF_ENV       \
 210         CONFIG_KM_DEF_ENV_BOOTPARAMS                                    \
 211         CONFIG_KM_DEF_NETDEV                                            \
 212         CONFIG_KM_DEF_ENV_CPU                                           \
 213         CONFIG_KM_DEF_ENV_BOOTTARGETS                                   \
 214         CONFIG_KM_DEF_ENV_BOOTARGS                                      \
 215         CONFIG_KM_DEF_ENV_FLASH_BOOT                                    \
 216         CONFIG_KM_DEF_ENV_CONSTANTS                                     \
 217         "altbootcmd=run bootcmd\0"                                      \
 218         "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"                   \
 219         "bootcmd=km_checkbidhwk &&  "                                   \
 220                 "setenv bootcmd \'if km_checktestboot; then; "          \
 221                                 "setenv boot_bank ${test_bank}; else; " \
 222                                 "setenv boot_bank ${actual_bank}; fi;"  \
 223                         "run ${subbootcmds}; reset\' && "               \
 224                 "setenv altbootcmd \'setenv boot_bank ${backup_bank}; " \
 225                         "run ${subbootcmds}; reset\' && "               \
 226                 "saveenv && saveenv && boot\0"                          \
 227         "bootlimit=3\0"                                                 \
 228         "cramfsloadfdt="                                                \
 229                 "cramfsload ${fdt_addr_r} "                             \
 230                 "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"             \
 231         "fdt_addr_r="__stringify(CONFIG_KM_FDT_ADDR) "\0"               \
 232         "init=/sbin/init-overlay.sh\0"                                  \
 233         "load_addr_r="__stringify(CONFIG_KM_KERNEL_ADDR) "\0"           \
 234         "load=tftpboot ${load_addr_r} ${u-boot}\0"                      \
 235         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 236         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 237         ""
 238 #endif /* CONFIG_KM_DEF_ENV */
 239
 240 #endif /* __CONFIG_KEYMILE_H */