include/configs/lacie_kw.h

   1 /*
   2  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_LACIE_KW_H
   8 #define _CONFIG_LACIE_KW_H
   9
  10 /*
  11  * Machine number definition
  12  */
  13 #if defined(CONFIG_INETSPACE_V2)
  14 #define CONFIG_MACH_TYPE                MACH_TYPE_INETSPACE_V2
  15 #define CONFIG_IDENT_STRING             " IS v2"
  16 #elif defined(CONFIG_NETSPACE_V2)
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_V2
  18 #define CONFIG_IDENT_STRING             " NS v2"
  19 #elif defined(CONFIG_NETSPACE_LITE_V2)
  20 #define MACH_TYPE_NETSPACE_LITE_V2      2983 /* missing in mach-types.h */
  21 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_LITE_V2
  22 #define CONFIG_IDENT_STRING             " NS v2 Lite"
  23 #elif defined(CONFIG_NETSPACE_MINI_V2)
  24 #define MACH_TYPE_NETSPACE_MINI_V2      2831 /* missing in mach-types.h */
  25 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MINI_V2
  26 #define CONFIG_IDENT_STRING             " NS v2 Mini"
  27 #elif defined(CONFIG_NETSPACE_MAX_V2)
  28 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MAX_V2
  29 #define CONFIG_IDENT_STRING             " NS Max v2"
  30 #elif defined(CONFIG_D2NET_V2)
  31 #define CONFIG_MACH_TYPE                MACH_TYPE_D2NET_V2
  32 #define CONFIG_IDENT_STRING             " D2 v2"
  33 #elif defined(CONFIG_NET2BIG_V2)
  34 #define CONFIG_MACH_TYPE                MACH_TYPE_NET2BIG_V2
  35 #define CONFIG_IDENT_STRING             " 2Big v2"
  36 #else
  37 #error "Unknown board"
  38 #endif
  39
  40 /*
  41  * High Level Configuration Options (easy to change)
  42  */
  43 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  44 /* SoC name */
  45 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  46 #define CONFIG_KW88F6192
  47 #else
  48 #define CONFIG_KW88F6281
  49 #endif
  50 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  51
  52 /*
  53  * Commands configuration
  54  */
  55 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  56 #define CONFIG_CMD_ENV
  57 #define CONFIG_CMD_IDE
  58 #ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */
  59 #endif
  60
  61 /*
  62  * Core clock definition
  63  */
  64 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
  65
  66 /*
  67  * SDRAM configuration
  68  */
  69 #define CONFIG_NR_DRAM_BANKS            1
  70
  71 /*
  72  * Different SDRAM configuration and size for some of the boards derived
  73  * from the Network Space v2
  74  */
  75 #if defined(CONFIG_INETSPACE_V2)
  76 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
  77 #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  78 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
  79 #endif
  80
  81 /*
  82  * mv-common.h should be defined after CMD configs since it used them
  83  * to enable certain macros
  84  */
  85 #include "mv-common.h"
  86
  87 /* Remove or override few declarations from mv-common.h */
  88 #undef CONFIG_RBTREE
  89 #undef CONFIG_ENV_SPI_MAX_HZ
  90 #undef CONFIG_SYS_IDE_MAXBUS
  91 #undef CONFIG_SYS_IDE_MAXDEVICE
  92 #define CONFIG_ENV_SPI_MAX_HZ           20000000 /* 20Mhz */
  93
  94 /*
  95  * Enable platform initialisation via misc_init_r() function
  96  */
  97 #define CONFIG_MISC_INIT_R
  98
  99 /*
 100  * Ethernet Driver configuration
 101  */
 102 #ifdef CONFIG_CMD_NET
 103 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
 104 #define CONFIG_NETCONSOLE
 105 #endif
 106
 107 /*
 108  * SATA Driver configuration
 109  */
 110 #ifdef CONFIG_MVSATA_IDE
 111 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 112 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
 113         defined(CONFIG_NET2BIG_V2)
 114 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 115 #define CONFIG_SYS_IDE_MAXBUS           2
 116 #define CONFIG_SYS_IDE_MAXDEVICE        2
 117 #else
 118 #define CONFIG_SYS_IDE_MAXBUS           1
 119 #define CONFIG_SYS_IDE_MAXDEVICE        1
 120 #endif
 121 #endif /* CONFIG_MVSATA_IDE */
 122
 123 /*
 124  * Enable GPI0 support
 125  */
 126 #define CONFIG_KIRKWOOD_GPIO
 127
 128 /*
 129  * Enable I2C support
 130  */
 131 #ifdef CONFIG_CMD_I2C
 132 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
 133 #define CONFIG_CMD_EEPROM
 134 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 135 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
 136 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
 137 #if defined(CONFIG_NET2BIG_V2)
 138 #define CONFIG_SYS_I2C_G762_ADDR                0x3e
 139 #endif
 140 #endif /* CONFIG_CMD_I2C */
 141
 142 /*
 143  * Partition support
 144  */
 145 #define CONFIG_DOS_PARTITION
 146 #define CONFIG_EFI_PARTITION
 147
 148 /*
 149  * File systems support
 150  */
 151 #define CONFIG_CMD_EXT2
 152 #define CONFIG_CMD_FAT
 153
 154 /*
 155  * Console configuration
 156  */
 157 #define CONFIG_CONSOLE_MUX
 158 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 159
 160 /*
 161  * Environment variables configurations
 162  */
 163 #define CONFIG_ENV_IS_IN_SPI_FLASH
 164 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64KB */
 165 #define CONFIG_ENV_SIZE                 0x1000  /* 4KB */
 166 #define CONFIG_ENV_ADDR                 0x70000
 167 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
 168
 169 /*
 170  * Default environment variables
 171  */
 172 #define CONFIG_BOOTARGS "console=ttyS0,115200"
 173
 174 #define CONFIG_BOOTCOMMAND                                      \
 175         "dhcp && run netconsole; "                              \
 176         "if run usbload || run diskload; then bootm; fi"
 177
 178 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 179         "stdin=serial\0"                                        \
 180         "stdout=serial\0"                                       \
 181         "stderr=serial\0"                                       \
 182         "bootfile=uImage\0"                                     \
 183         "loadaddr=0x800000\0"                                   \
 184         "autoload=no\0"                                         \
 185         "netconsole="                                           \
 186                 "set stdin $stdin,nc; "                         \
 187                 "set stdout $stdout,nc; "                       \
 188                 "set stderr $stderr,nc;\0"                      \
 189         "diskload=ide reset && "                                \
 190                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
 191         "usbload=usb start && "                                 \
 192                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
 193
 194 #endif /* _CONFIG_LACIE_KW_H */