include/configs/ls1021atwr.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_PSCI
  13
  14 #define CONFIG_SYS_FSL_CLK
  15
  16 #define CONFIG_DISPLAY_CPUINFO
  17 #define CONFIG_DISPLAY_BOARDINFO
  18
  19 #define CONFIG_SKIP_LOWLEVEL_INIT
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_DEEP_SLEEP
  22 #ifdef CONFIG_DEEP_SLEEP
  23 #define CONFIG_SILENT_CONSOLE
  24 #endif
  25
  26 /*
  27  * Size of malloc() pool
  28  */
  29 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  30
  31 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  32 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  33
  34 /*
  35  * USB
  36  */
  37
  38 /*
  39  * EHCI Support - disbaled by default as
  40  * there is no signal coming out of soc on
  41  * this board for this controller. However,
  42  * the silicon still has this controller,
  43  * and anyone can use this controller by
  44  * taking signals out on their board.
  45  */
  46
  47 /*#define CONFIG_HAS_FSL_DR_USB*/
  48
  49 #ifdef CONFIG_HAS_FSL_DR_USB
  50 #define CONFIG_USB_EHCI
  51 #define CONFIG_USB_EHCI_FSL
  52 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  53 #endif
  54
  55 /* XHCI Support - enabled by default */
  56 #define CONFIG_HAS_FSL_XHCI_USB
  57
  58 #ifdef CONFIG_HAS_FSL_XHCI_USB
  59 #define CONFIG_USB_XHCI_FSL
  60 #define CONFIG_USB_XHCI_DWC3
  61 #define CONFIG_USB_XHCI
  62 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
  63 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
  64 #endif
  65
  66 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
  67 #define CONFIG_USB_STORAGE
  68 #endif
  69
  70 /*
  71  * Generic Timer Definitions
  72  */
  73 #define GENERIC_TIMER_CLK               12500000
  74
  75 #define CONFIG_SYS_CLK_FREQ             100000000
  76 #define CONFIG_DDR_CLK_FREQ             100000000
  77
  78 #define DDR_SDRAM_CFG                   0x470c0008
  79 #define DDR_CS0_BNDS                    0x008000bf
  80 #define DDR_CS0_CONFIG                  0x80014302
  81 #define DDR_TIMING_CFG_0                0x50550004
  82 #define DDR_TIMING_CFG_1                0xbcb38c56
  83 #define DDR_TIMING_CFG_2                0x0040d120
  84 #define DDR_TIMING_CFG_3                0x010e1000
  85 #define DDR_TIMING_CFG_4                0x00000001
  86 #define DDR_TIMING_CFG_5                0x03401400
  87 #define DDR_SDRAM_CFG_2                 0x00401010
  88 #define DDR_SDRAM_MODE                  0x00061c60
  89 #define DDR_SDRAM_MODE_2                0x00180000
  90 #define DDR_SDRAM_INTERVAL              0x18600618
  91 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  92 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  93 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  94 #define DDR_DDR_CDR1                    0x80040000
  95 #define DDR_DDR_CDR2                    0x00000001
  96 #define DDR_SDRAM_CLK_CNTL              0x02000000
  97 #define DDR_DDR_ZQ_CNTL                 0x89080600
  98 #define DDR_CS0_CONFIG_2                0
  99 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
 100 #define SDRAM_CFG2_D_INIT               0x00000010
 101 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
 102 #define SDRAM_CFG2_FRC_SR               0x80000000
 103 #define SDRAM_CFG_BI                    0x00000001
 104
 105 #ifdef CONFIG_RAMBOOT_PBL
 106 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
 107 #endif
 108
 109 #ifdef CONFIG_SD_BOOT
 110 #ifdef CONFIG_SD_BOOT_QSPI
 111 #define CONFIG_SYS_FSL_PBL_RCW  \
 112         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
 113 #else
 114 #define CONFIG_SYS_FSL_PBL_RCW  \
 115         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 116 #endif
 117 #define CONFIG_SPL_FRAMEWORK
 118 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
 119 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 120 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 121 #define CONFIG_SPL_ENV_SUPPORT
 122 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 123 #define CONFIG_SPL_I2C_SUPPORT
 124 #define CONFIG_SPL_WATCHDOG_SUPPORT
 125 #define CONFIG_SPL_SERIAL_SUPPORT
 126 #define CONFIG_SPL_MMC_SUPPORT
 127 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR         0xe8
 128 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS              0x400
 129
 130 #define CONFIG_SPL_TEXT_BASE            0x10000000
 131 #define CONFIG_SPL_MAX_SIZE             0x1a000
 132 #define CONFIG_SPL_STACK                0x1001d000
 133 #define CONFIG_SPL_PAD_TO               0x1c000
 134 #define CONFIG_SYS_TEXT_BASE            0x82000000
 135
 136 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 137                 CONFIG_SYS_MONITOR_LEN)
 138 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 139 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 140 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 141 #define CONFIG_SYS_MONITOR_LEN          0x80000
 142 #endif
 143
 144 #ifdef CONFIG_QSPI_BOOT
 145 #define CONFIG_SYS_TEXT_BASE            0x40010000
 146 #endif
 147
 148 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 149 #define CONFIG_SYS_NO_FLASH
 150 #endif
 151
 152 #ifndef CONFIG_SYS_TEXT_BASE
 153 #define CONFIG_SYS_TEXT_BASE            0x60100000
 154 #endif
 155
 156 #define CONFIG_NR_DRAM_BANKS            1
 157 #define PHYS_SDRAM                      0x80000000
 158 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 159
 160 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 161 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 162
 163 #define CONFIG_SYS_HAS_SERDES
 164
 165 #define CONFIG_FSL_CAAM                 /* Enable CAAM */
 166
 167 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 168         !defined(CONFIG_QSPI_BOOT)
 169 #define CONFIG_U_QE
 170 #endif
 171
 172 /*
 173  * IFC Definitions
 174  */
 175 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 176 #define CONFIG_FSL_IFC
 177 #define CONFIG_SYS_FLASH_BASE           0x60000000
 178 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 179
 180 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 181 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 182                                 CSPR_PORT_SIZE_16 | \
 183                                 CSPR_MSEL_NOR | \
 184                                 CSPR_V)
 185 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 186
 187 /* NOR Flash Timing Params */
 188 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 189                                         CSOR_NOR_TRHZ_80)
 190 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 191                                         FTIM0_NOR_TEADC(0x5) | \
 192                                         FTIM0_NOR_TAVDS(0x0) | \
 193                                         FTIM0_NOR_TEAHC(0x5))
 194 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 195                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 196                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 197 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 198                                         FTIM2_NOR_TCH(0x4) | \
 199                                         FTIM2_NOR_TWP(0x1c) | \
 200                                         FTIM2_NOR_TWPH(0x0e))
 201 #define CONFIG_SYS_NOR_FTIM3            0
 202
 203 #define CONFIG_FLASH_CFI_DRIVER
 204 #define CONFIG_SYS_FLASH_CFI
 205 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 206 #define CONFIG_SYS_FLASH_QUIET_TEST
 207 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 208
 209 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 210 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 211 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 212 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 213
 214 #define CONFIG_SYS_FLASH_EMPTY_INFO
 215 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 216
 217 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 218 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 219 #endif
 220
 221 /* CPLD */
 222
 223 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 224 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 225
 226 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 227 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 228                                         CSPR_PORT_SIZE_8 | \
 229                                         CSPR_MSEL_GPCM | \
 230                                         CSPR_V)
 231 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 232 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 233                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 234                                         CSOR_NOR_TRHZ_80)
 235
 236 /* CPLD Timing parameters for IFC GPCM */
 237 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 238                                         FTIM0_GPCM_TEADC(0xf) | \
 239                                         FTIM0_GPCM_TEAHC(0xf))
 240 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 241                                         FTIM1_GPCM_TRAD(0x3f))
 242 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 243                                         FTIM2_GPCM_TCH(0xf) | \
 244                                         FTIM2_GPCM_TWP(0xff))
 245 #define CONFIG_SYS_FPGA_FTIM3           0x0
 246 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 247 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 248 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 249 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 250 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 251 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 252 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 253 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 254 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 255 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 256 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 257 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 258 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 259 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 260 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 261 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 262
 263 /*
 264  * Serial Port
 265  */
 266 #ifdef CONFIG_LPUART
 267 #define CONFIG_LPUART_32B_REG
 268 #else
 269 #define CONFIG_CONS_INDEX               1
 270 #define CONFIG_SYS_NS16550_SERIAL
 271 #ifndef CONFIG_DM_SERIAL
 272 #define CONFIG_SYS_NS16550_REG_SIZE     1
 273 #endif
 274 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 275 #endif
 276
 277 #define CONFIG_BAUDRATE                 115200
 278
 279 /*
 280  * I2C
 281  */
 282 #define CONFIG_SYS_I2C
 283 #define CONFIG_SYS_I2C_MXC
 284 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 285 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 286 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 287
 288 /* EEPROM */
 289 #define CONFIG_ID_EEPROM
 290 #define CONFIG_SYS_I2C_EEPROM_NXID
 291 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 292 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 293 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 294 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 295 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 296
 297 /*
 298  * MMC
 299  */
 300 #define CONFIG_MMC
 301 #define CONFIG_FSL_ESDHC
 302 #define CONFIG_GENERIC_MMC
 303
 304 #define CONFIG_DOS_PARTITION
 305
 306 /* SPI */
 307 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 308 /* QSPI */
 309 #define QSPI0_AMBA_BASE                 0x40000000
 310 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 311 #define FSL_QSPI_FLASH_NUM              2
 312
 313 /* DSPI */
 314 #endif
 315
 316 /* DM SPI */
 317 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 318 #define CONFIG_DM_SPI_FLASH
 319 #endif
 320
 321 /*
 322  * Video
 323  */
 324 #define CONFIG_FSL_DCU_FB
 325
 326 #ifdef CONFIG_FSL_DCU_FB
 327 #define CONFIG_VIDEO
 328 #define CONFIG_CMD_BMP
 329 #define CONFIG_CFB_CONSOLE
 330 #define CONFIG_VGA_AS_SINGLE_DEVICE
 331 #define CONFIG_VIDEO_LOGO
 332 #define CONFIG_VIDEO_BMP_LOGO
 333 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 334
 335 #define CONFIG_FSL_DCU_SII9022A
 336 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 337 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 338 #endif
 339
 340 /*
 341  * eTSEC
 342  */
 343 #define CONFIG_TSEC_ENET
 344
 345 #ifdef CONFIG_TSEC_ENET
 346 #define CONFIG_MII
 347 #define CONFIG_MII_DEFAULT_TSEC         1
 348 #define CONFIG_TSEC1                    1
 349 #define CONFIG_TSEC1_NAME               "eTSEC1"
 350 #define CONFIG_TSEC2                    1
 351 #define CONFIG_TSEC2_NAME               "eTSEC2"
 352 #define CONFIG_TSEC3                    1
 353 #define CONFIG_TSEC3_NAME               "eTSEC3"
 354
 355 #define TSEC1_PHY_ADDR                  2
 356 #define TSEC2_PHY_ADDR                  0
 357 #define TSEC3_PHY_ADDR                  1
 358
 359 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 360 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 361 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 362
 363 #define TSEC1_PHYIDX                    0
 364 #define TSEC2_PHYIDX                    0
 365 #define TSEC3_PHYIDX                    0
 366
 367 #define CONFIG_ETHPRIME                 "eTSEC1"
 368
 369 #define CONFIG_PHY_GIGE
 370 #define CONFIG_PHYLIB
 371 #define CONFIG_PHY_ATHEROS
 372
 373 #define CONFIG_HAS_ETH0
 374 #define CONFIG_HAS_ETH1
 375 #define CONFIG_HAS_ETH2
 376 #endif
 377
 378 /* PCIe */
 379 #define CONFIG_PCI              /* Enable PCI/PCIE */
 380 #define CONFIG_PCIE1            /* PCIE controler 1 */
 381 #define CONFIG_PCIE2            /* PCIE controler 2 */
 382 #define CONFIG_PCIE_LAYERSCAPE  /* Use common FSL Layerscape PCIe code */
 383 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 384
 385 #define CONFIG_SYS_PCI_64BIT
 386
 387 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
 388 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
 389 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
 390 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
 391
 392 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
 393 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
 394 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 395
 396 #define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
 397 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
 398 #define CONFIG_SYS_PCIE_MEM_SIZE        0x08000000      /* 128M */
 399
 400 #ifdef CONFIG_PCI
 401 #define CONFIG_PCI_PNP
 402 #define CONFIG_PCI_SCAN_SHOW
 403 #define CONFIG_CMD_PCI
 404 #endif
 405
 406 #define CONFIG_CMDLINE_TAG
 407 #define CONFIG_CMDLINE_EDITING
 408
 409 #define CONFIG_ARMV7_NONSEC
 410 #define CONFIG_ARMV7_VIRT
 411 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 412 #define CONFIG_LAYERSCAPE_NS_ACCESS
 413 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 414 #define CONFIG_TIMER_CLK_FREQ           12500000
 415
 416 #define CONFIG_HWCONFIG
 417 #define HWCONFIG_BUFFER_SIZE            256
 418
 419 #define CONFIG_FSL_DEVICE_DISABLE
 420
 421 #define CONFIG_BOOTDELAY                3
 422
 423 #ifdef CONFIG_LPUART
 424 #define CONFIG_EXTRA_ENV_SETTINGS       \
 425         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 426         "initrd_high=0xffffffff\0"      \
 427         "fdt_high=0xffffffff\0"
 428 #else
 429 #define CONFIG_EXTRA_ENV_SETTINGS       \
 430         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 431         "initrd_high=0xffffffff\0"      \
 432         "fdt_high=0xffffffff\0"
 433 #endif
 434
 435 /*
 436  * Miscellaneous configurable options
 437  */
 438 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 439 #define CONFIG_AUTO_COMPLETE
 440 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 441 #define CONFIG_SYS_PBSIZE               \
 442                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 443 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 444 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 445
 446 #define CONFIG_SYS_MEMTEST_START        0x80000000
 447 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 448
 449 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 450
 451 #define CONFIG_LS102XA_STREAM_ID
 452
 453 /*
 454  * Stack sizes
 455  * The stack sizes are set up in start.S using the settings below
 456  */
 457 #define CONFIG_STACKSIZE                (30 * 1024)
 458
 459 #define CONFIG_SYS_INIT_SP_OFFSET \
 460         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 461 #define CONFIG_SYS_INIT_SP_ADDR \
 462         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 463
 464 #ifdef CONFIG_SPL_BUILD
 465 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 466 #else
 467 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 468 #endif
 469
 470 #define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 471
 472 /*
 473  * Environment
 474  */
 475 #define CONFIG_ENV_OVERWRITE
 476
 477 #if defined(CONFIG_SD_BOOT)
 478 #define CONFIG_ENV_OFFSET               0x100000
 479 #define CONFIG_ENV_IS_IN_MMC
 480 #define CONFIG_SYS_MMC_ENV_DEV          0
 481 #define CONFIG_ENV_SIZE                 0x20000
 482 #elif defined(CONFIG_QSPI_BOOT)
 483 #define CONFIG_ENV_IS_IN_SPI_FLASH
 484 #define CONFIG_ENV_SIZE                 0x2000
 485 #define CONFIG_ENV_OFFSET               0x100000
 486 #define CONFIG_ENV_SECT_SIZE            0x10000
 487 #else
 488 #define CONFIG_ENV_IS_IN_FLASH
 489 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 490 #define CONFIG_ENV_SIZE                 0x20000
 491 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 492 #endif
 493
 494 #define CONFIG_MISC_INIT_R
 495
 496 /* Hash command with SHA acceleration supported in hardware */
 497 #ifdef CONFIG_FSL_CAAM
 498 #define CONFIG_CMD_HASH
 499 #define CONFIG_SHA_HW_ACCEL
 500 #endif
 501
 502 #include <asm/fsl_secure_boot.h>
 503 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 504
 505 #endif