include/configs/ls1021atwr.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_PSCI_1_0
  13
  14 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  15
  16 #define CONFIG_SYS_FSL_CLK
  17
  18 #define CONFIG_DISPLAY_CPUINFO
  19 #define CONFIG_DISPLAY_BOARDINFO
  20
  21 #define CONFIG_BOARD_EARLY_INIT_F
  22 #define CONFIG_DEEP_SLEEP
  23 #ifdef CONFIG_DEEP_SLEEP
  24 #define CONFIG_SILENT_CONSOLE
  25 #endif
  26
  27 /*
  28  * Size of malloc() pool
  29  */
  30 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  31
  32 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  33 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  34
  35 /*
  36  * USB
  37  */
  38
  39 /*
  40  * EHCI Support - disbaled by default as
  41  * there is no signal coming out of soc on
  42  * this board for this controller. However,
  43  * the silicon still has this controller,
  44  * and anyone can use this controller by
  45  * taking signals out on their board.
  46  */
  47
  48 /*#define CONFIG_HAS_FSL_DR_USB*/
  49
  50 #ifdef CONFIG_HAS_FSL_DR_USB
  51 #define CONFIG_USB_EHCI
  52 #define CONFIG_USB_EHCI_FSL
  53 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  54 #endif
  55
  56 /* XHCI Support - enabled by default */
  57 #define CONFIG_HAS_FSL_XHCI_USB
  58
  59 #ifdef CONFIG_HAS_FSL_XHCI_USB
  60 #define CONFIG_USB_XHCI_FSL
  61 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
  62 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
  63 #endif
  64
  65 /*
  66  * Generic Timer Definitions
  67  */
  68 #define GENERIC_TIMER_CLK               12500000
  69
  70 #define CONFIG_SYS_CLK_FREQ             100000000
  71 #define CONFIG_DDR_CLK_FREQ             100000000
  72
  73 #define DDR_SDRAM_CFG                   0x470c0008
  74 #define DDR_CS0_BNDS                    0x008000bf
  75 #define DDR_CS0_CONFIG                  0x80014302
  76 #define DDR_TIMING_CFG_0                0x50550004
  77 #define DDR_TIMING_CFG_1                0xbcb38c56
  78 #define DDR_TIMING_CFG_2                0x0040d120
  79 #define DDR_TIMING_CFG_3                0x010e1000
  80 #define DDR_TIMING_CFG_4                0x00000001
  81 #define DDR_TIMING_CFG_5                0x03401400
  82 #define DDR_SDRAM_CFG_2                 0x00401010
  83 #define DDR_SDRAM_MODE                  0x00061c60
  84 #define DDR_SDRAM_MODE_2                0x00180000
  85 #define DDR_SDRAM_INTERVAL              0x18600618
  86 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  87 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  88 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  89 #define DDR_DDR_CDR1                    0x80040000
  90 #define DDR_DDR_CDR2                    0x00000001
  91 #define DDR_SDRAM_CLK_CNTL              0x02000000
  92 #define DDR_DDR_ZQ_CNTL                 0x89080600
  93 #define DDR_CS0_CONFIG_2                0
  94 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  95 #define SDRAM_CFG2_D_INIT               0x00000010
  96 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  97 #define SDRAM_CFG2_FRC_SR               0x80000000
  98 #define SDRAM_CFG_BI                    0x00000001
  99
 100 #ifdef CONFIG_RAMBOOT_PBL
 101 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
 102 #endif
 103
 104 #ifdef CONFIG_SD_BOOT
 105 #ifdef CONFIG_SD_BOOT_QSPI
 106 #define CONFIG_SYS_FSL_PBL_RCW  \
 107         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
 108 #else
 109 #define CONFIG_SYS_FSL_PBL_RCW  \
 110         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 111 #endif
 112 #define CONFIG_SPL_FRAMEWORK
 113 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
 114 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR         0xe8
 115
 116 #ifdef CONFIG_SECURE_BOOT
 117 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
 118 /*
 119  * HDR would be appended at end of image and copied to DDR along
 120  * with U-Boot image.
 121  */
 122 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS              (0x400 + \
 123                 (CONFIG_U_BOOT_HDR_SIZE / 512)
 124 #else
 125 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS              0x400
 126 #endif /* ifdef CONFIG_SECURE_BOOT */
 127
 128 #define CONFIG_SPL_TEXT_BASE            0x10000000
 129 #define CONFIG_SPL_MAX_SIZE             0x1a000
 130 #define CONFIG_SPL_STACK                0x1001d000
 131 #define CONFIG_SPL_PAD_TO               0x1c000
 132 #define CONFIG_SYS_TEXT_BASE            0x82000000
 133
 134 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 135                 CONFIG_SYS_MONITOR_LEN)
 136 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 137 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 138 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 139
 140 #ifdef CONFIG_U_BOOT_HDR_SIZE
 141 /*
 142  * HDR would be appended at end of image and copied to DDR along
 143  * with U-Boot image. Here u-boot max. size is 512K. So if binary
 144  * size increases then increase this size in case of secure boot as
 145  * it uses raw u-boot image instead of fit image.
 146  */
 147 #define CONFIG_SYS_MONITOR_LEN          (0x80000 + CONFIG_U_BOOT_HDR_SIZE)
 148 #else
 149 #define CONFIG_SYS_MONITOR_LEN          0x80000
 150 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 151 #endif
 152
 153 #ifdef CONFIG_QSPI_BOOT
 154 #define CONFIG_SYS_TEXT_BASE            0x40010000
 155 #endif
 156
 157 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 158 #define CONFIG_SYS_NO_FLASH
 159 #endif
 160
 161 #ifndef CONFIG_SYS_TEXT_BASE
 162 #define CONFIG_SYS_TEXT_BASE            0x60100000
 163 #endif
 164
 165 #define CONFIG_NR_DRAM_BANKS            1
 166 #define PHYS_SDRAM                      0x80000000
 167 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 168
 169 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 170 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 171
 172 #define CONFIG_FSL_CAAM                 /* Enable CAAM */
 173
 174 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 175         !defined(CONFIG_QSPI_BOOT)
 176 #define CONFIG_U_QE
 177 #endif
 178
 179 /*
 180  * IFC Definitions
 181  */
 182 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 183 #define CONFIG_FSL_IFC
 184 #define CONFIG_SYS_FLASH_BASE           0x60000000
 185 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 186
 187 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 188 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 189                                 CSPR_PORT_SIZE_16 | \
 190                                 CSPR_MSEL_NOR | \
 191                                 CSPR_V)
 192 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 193
 194 /* NOR Flash Timing Params */
 195 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 196                                         CSOR_NOR_TRHZ_80)
 197 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 198                                         FTIM0_NOR_TEADC(0x5) | \
 199                                         FTIM0_NOR_TAVDS(0x0) | \
 200                                         FTIM0_NOR_TEAHC(0x5))
 201 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 202                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 203                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 204 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 205                                         FTIM2_NOR_TCH(0x4) | \
 206                                         FTIM2_NOR_TWP(0x1c) | \
 207                                         FTIM2_NOR_TWPH(0x0e))
 208 #define CONFIG_SYS_NOR_FTIM3            0
 209
 210 #define CONFIG_FLASH_CFI_DRIVER
 211 #define CONFIG_SYS_FLASH_CFI
 212 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 213 #define CONFIG_SYS_FLASH_QUIET_TEST
 214 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 215
 216 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 217 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 218 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 219 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 220
 221 #define CONFIG_SYS_FLASH_EMPTY_INFO
 222 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 223
 224 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 225 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 226 #endif
 227
 228 /* CPLD */
 229
 230 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 231 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 232
 233 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 234 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 235                                         CSPR_PORT_SIZE_8 | \
 236                                         CSPR_MSEL_GPCM | \
 237                                         CSPR_V)
 238 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 239 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 240                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 241                                         CSOR_NOR_TRHZ_80)
 242
 243 /* CPLD Timing parameters for IFC GPCM */
 244 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 245                                         FTIM0_GPCM_TEADC(0xf) | \
 246                                         FTIM0_GPCM_TEAHC(0xf))
 247 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 248                                         FTIM1_GPCM_TRAD(0x3f))
 249 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 250                                         FTIM2_GPCM_TCH(0xf) | \
 251                                         FTIM2_GPCM_TWP(0xff))
 252 #define CONFIG_SYS_FPGA_FTIM3           0x0
 253 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 254 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 255 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 256 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 257 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 258 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 259 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 260 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 261 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 262 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 263 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 264 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 265 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 266 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 267 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 268 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 269
 270 /*
 271  * Serial Port
 272  */
 273 #ifdef CONFIG_LPUART
 274 #define CONFIG_LPUART_32B_REG
 275 #else
 276 #define CONFIG_CONS_INDEX               1
 277 #define CONFIG_SYS_NS16550_SERIAL
 278 #ifndef CONFIG_DM_SERIAL
 279 #define CONFIG_SYS_NS16550_REG_SIZE     1
 280 #endif
 281 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 282 #endif
 283
 284 #define CONFIG_BAUDRATE                 115200
 285
 286 /*
 287  * I2C
 288  */
 289 #define CONFIG_SYS_I2C
 290 #define CONFIG_SYS_I2C_MXC
 291 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 292 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 293 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 294
 295 /* EEPROM */
 296 #define CONFIG_ID_EEPROM
 297 #define CONFIG_SYS_I2C_EEPROM_NXID
 298 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 299 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 300 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 301 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 302 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 303
 304 /*
 305  * MMC
 306  */
 307 #define CONFIG_MMC
 308 #define CONFIG_FSL_ESDHC
 309 #define CONFIG_GENERIC_MMC
 310
 311 #define CONFIG_DOS_PARTITION
 312
 313 /* SPI */
 314 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 315 /* QSPI */
 316 #define QSPI0_AMBA_BASE                 0x40000000
 317 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 318 #define FSL_QSPI_FLASH_NUM              2
 319
 320 /* DSPI */
 321 #endif
 322
 323 /* DM SPI */
 324 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 325 #define CONFIG_DM_SPI_FLASH
 326 #endif
 327
 328 /*
 329  * Video
 330  */
 331 #define CONFIG_FSL_DCU_FB
 332
 333 #ifdef CONFIG_FSL_DCU_FB
 334 #define CONFIG_VIDEO
 335 #define CONFIG_CMD_BMP
 336 #define CONFIG_CFB_CONSOLE
 337 #define CONFIG_VGA_AS_SINGLE_DEVICE
 338 #define CONFIG_VIDEO_LOGO
 339 #define CONFIG_VIDEO_BMP_LOGO
 340 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 341
 342 #define CONFIG_FSL_DCU_SII9022A
 343 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 344 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 345 #endif
 346
 347 /*
 348  * eTSEC
 349  */
 350 #define CONFIG_TSEC_ENET
 351
 352 #ifdef CONFIG_TSEC_ENET
 353 #define CONFIG_MII
 354 #define CONFIG_MII_DEFAULT_TSEC         1
 355 #define CONFIG_TSEC1                    1
 356 #define CONFIG_TSEC1_NAME               "eTSEC1"
 357 #define CONFIG_TSEC2                    1
 358 #define CONFIG_TSEC2_NAME               "eTSEC2"
 359 #define CONFIG_TSEC3                    1
 360 #define CONFIG_TSEC3_NAME               "eTSEC3"
 361
 362 #define TSEC1_PHY_ADDR                  2
 363 #define TSEC2_PHY_ADDR                  0
 364 #define TSEC3_PHY_ADDR                  1
 365
 366 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 367 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 368 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 369
 370 #define TSEC1_PHYIDX                    0
 371 #define TSEC2_PHYIDX                    0
 372 #define TSEC3_PHYIDX                    0
 373
 374 #define CONFIG_ETHPRIME                 "eTSEC1"
 375
 376 #define CONFIG_PHY_GIGE
 377 #define CONFIG_PHYLIB
 378 #define CONFIG_PHY_ATHEROS
 379
 380 #define CONFIG_HAS_ETH0
 381 #define CONFIG_HAS_ETH1
 382 #define CONFIG_HAS_ETH2
 383 #endif
 384
 385 /* PCIe */
 386 #define CONFIG_PCI              /* Enable PCI/PCIE */
 387 #define CONFIG_PCIE1            /* PCIE controller 1 */
 388 #define CONFIG_PCIE2            /* PCIE controller 2 */
 389 #define CONFIG_PCIE_LAYERSCAPE  /* Use common FSL Layerscape PCIe code */
 390 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 391
 392 #define CONFIG_SYS_PCI_64BIT
 393
 394 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
 395 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
 396 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
 397 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
 398
 399 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
 400 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
 401 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 402
 403 #define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
 404 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
 405 #define CONFIG_SYS_PCIE_MEM_SIZE        0x08000000      /* 128M */
 406
 407 #ifdef CONFIG_PCI
 408 #define CONFIG_PCI_PNP
 409 #define CONFIG_PCI_SCAN_SHOW
 410 #define CONFIG_CMD_PCI
 411 #endif
 412
 413 #define CONFIG_CMDLINE_TAG
 414 #define CONFIG_CMDLINE_EDITING
 415
 416 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 417 #define CONFIG_LAYERSCAPE_NS_ACCESS
 418 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 419 #define CONFIG_TIMER_CLK_FREQ           12500000
 420
 421 #define CONFIG_HWCONFIG
 422 #define HWCONFIG_BUFFER_SIZE            256
 423
 424 #define CONFIG_FSL_DEVICE_DISABLE
 425
 426
 427 #ifdef CONFIG_LPUART
 428 #define CONFIG_EXTRA_ENV_SETTINGS       \
 429         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 430         "initrd_high=0xffffffff\0"      \
 431         "fdt_high=0xffffffff\0"
 432 #else
 433 #define CONFIG_EXTRA_ENV_SETTINGS       \
 434         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 435         "initrd_high=0xffffffff\0"      \
 436         "fdt_high=0xffffffff\0"
 437 #endif
 438
 439 /*
 440  * Miscellaneous configurable options
 441  */
 442 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 443 #define CONFIG_AUTO_COMPLETE
 444 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 445 #define CONFIG_SYS_PBSIZE               \
 446                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 447 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 448 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 449
 450 #define CONFIG_SYS_MEMTEST_START        0x80000000
 451 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 452
 453 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 454
 455 #define CONFIG_LS102XA_STREAM_ID
 456
 457 /*
 458  * Stack sizes
 459  * The stack sizes are set up in start.S using the settings below
 460  */
 461 #define CONFIG_STACKSIZE                (30 * 1024)
 462
 463 #define CONFIG_SYS_INIT_SP_OFFSET \
 464         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 465 #define CONFIG_SYS_INIT_SP_ADDR \
 466         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 467
 468 #ifdef CONFIG_SPL_BUILD
 469 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 470 #else
 471 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 472 #endif
 473
 474 #define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 475
 476 /*
 477  * Environment
 478  */
 479 #define CONFIG_ENV_OVERWRITE
 480
 481 #if defined(CONFIG_SD_BOOT)
 482 #define CONFIG_ENV_OFFSET               0x100000
 483 #define CONFIG_ENV_IS_IN_MMC
 484 #define CONFIG_SYS_MMC_ENV_DEV          0
 485 #define CONFIG_ENV_SIZE                 0x20000
 486 #elif defined(CONFIG_QSPI_BOOT)
 487 #define CONFIG_ENV_IS_IN_SPI_FLASH
 488 #define CONFIG_ENV_SIZE                 0x2000
 489 #define CONFIG_ENV_OFFSET               0x100000
 490 #define CONFIG_ENV_SECT_SIZE            0x10000
 491 #else
 492 #define CONFIG_ENV_IS_IN_FLASH
 493 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 494 #define CONFIG_ENV_SIZE                 0x20000
 495 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 496 #endif
 497
 498 #define CONFIG_MISC_INIT_R
 499
 500 /* Hash command with SHA acceleration supported in hardware */
 501 #ifdef CONFIG_FSL_CAAM
 502 #define CONFIG_CMD_HASH
 503 #define CONFIG_SHA_HW_ACCEL
 504 #endif
 505
 506 #include <asm/fsl_secure_boot.h>
 507 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 508
 509 #endif