include/configs/ls1046aqds.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1046AQDS_H__
   8 #define __LS1046AQDS_H__
   9
  10 #include "ls1046a_common.h"
  11
  12 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
  13 #define CONFIG_SYS_TEXT_BASE            0x82000000
  14 #elif defined(CONFIG_QSPI_BOOT)
  15 #define CONFIG_SYS_TEXT_BASE            0x40010000
  16 #else
  17 #define CONFIG_SYS_TEXT_BASE            0x60100000
  18 #endif
  19
  20 #ifndef __ASSEMBLY__
  21 unsigned long get_board_sys_clk(void);
  22 unsigned long get_board_ddr_clk(void);
  23 #endif
  24
  25 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  26 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  27
  28 #define CONFIG_SKIP_LOWLEVEL_INIT
  29
  30 #define CONFIG_LAYERSCAPE_NS_ACCESS
  31
  32 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  33 /* Physical Memory Map */
  34 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  35 #define CONFIG_NR_DRAM_BANKS            2
  36
  37 #define CONFIG_DDR_SPD
  38 #define SPD_EEPROM_ADDRESS              0x51
  39 #define CONFIG_SYS_SPD_BUS_NUM          0
  40
  41 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  42
  43 #define CONFIG_DDR_ECC
  44 #ifdef CONFIG_DDR_ECC
  45 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  46 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  47 #endif
  48
  49 /* DSPI */
  50 #ifdef CONFIG_FSL_DSPI
  51 #define CONFIG_SPI_FLASH_STMICRO        /* cs0 */
  52 #define CONFIG_SPI_FLASH_SST            /* cs1 */
  53 #define CONFIG_SPI_FLASH_EON            /* cs2 */
  54 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  55 #define CONFIG_SF_DEFAULT_BUS           1
  56 #define CONFIG_SF_DEFAULT_CS            0
  57 #endif
  58 #endif
  59
  60 /* QSPI */
  61 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  62 #ifdef CONFIG_FSL_QSPI
  63 #define CONFIG_SPI_FLASH_SPANSION
  64 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
  65 #define FSL_QSPI_FLASH_NUM              2
  66 #endif
  67 #endif
  68
  69 #ifdef CONFIG_SYS_DPAA_FMAN
  70 #define CONFIG_FMAN_ENET
  71 #define CONFIG_PHYLIB
  72 #define CONFIG_PHY_VITESSE
  73 #define CONFIG_PHY_REALTEK
  74 #define CONFIG_PHYLIB_10G
  75 #define RGMII_PHY1_ADDR         0x1
  76 #define RGMII_PHY2_ADDR         0x2
  77 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
  78 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
  79 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
  80 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
  81 /* PHY address on QSGMII riser card on slot 2 */
  82 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
  83 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
  84 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
  85 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
  86 #endif
  87
  88 #ifdef CONFIG_RAMBOOT_PBL
  89 #define CONFIG_SYS_FSL_PBL_PBI \
  90         board/freescale/ls1046aqds/ls1046aqds_pbi.cfg
  91 #endif
  92
  93 #ifdef CONFIG_NAND_BOOT
  94 #define CONFIG_SYS_FSL_PBL_RCW \
  95         board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg
  96 #endif
  97
  98 #ifdef CONFIG_SD_BOOT
  99 #ifdef CONFIG_SD_BOOT_QSPI
 100 #define CONFIG_SYS_FSL_PBL_RCW \
 101         board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg
 102 #else
 103 #define CONFIG_SYS_FSL_PBL_RCW \
 104         board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg
 105 #endif
 106 #endif
 107
 108 /* IFC */
 109 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 110 #define CONFIG_FSL_IFC
 111 /*
 112  * CONFIG_SYS_FLASH_BASE has the final address (core view)
 113  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
 114  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
 115  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
 116  */
 117 #define CONFIG_SYS_FLASH_BASE                   0x60000000
 118 #define CONFIG_SYS_FLASH_BASE_PHYS              CONFIG_SYS_FLASH_BASE
 119 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 120
 121 #ifndef CONFIG_SYS_NO_FLASH
 122 #define CONFIG_FLASH_CFI_DRIVER
 123 #define CONFIG_SYS_FLASH_CFI
 124 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 125 #define CONFIG_SYS_FLASH_QUIET_TEST
 126 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 127 #endif
 128 #endif
 129
 130 /* SATA */
 131 #define CONFIG_LIBATA
 132 #define CONFIG_SCSI_AHCI
 133 #define CONFIG_SCSI_AHCI_PLAT
 134 #define CONFIG_SCSI
 135 #define CONFIG_DOS_PARTITION
 136 #define CONFIG_BOARD_LATE_INIT
 137
 138 /* EEPROM */
 139 #define CONFIG_ID_EEPROM
 140 #define CONFIG_SYS_I2C_EEPROM_NXID
 141 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 142 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 143 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 144 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 145 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 146
 147 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 148
 149 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 150 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 151 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 152                                                 CONFIG_SYS_SCSI_MAX_LUN)
 153
 154 /*
 155  * IFC Definitions
 156  */
 157 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 158 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 159 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 160                                 CSPR_PORT_SIZE_16 | \
 161                                 CSPR_MSEL_NOR | \
 162                                 CSPR_V)
 163 #define CONFIG_SYS_NOR1_CSPR_EXT        (0x0)
 164 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 165                                 + 0x8000000) | \
 166                                 CSPR_PORT_SIZE_16 | \
 167                                 CSPR_MSEL_NOR | \
 168                                 CSPR_V)
 169 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 170
 171 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 172                                         CSOR_NOR_TRHZ_80)
 173 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 174                                         FTIM0_NOR_TEADC(0x5) | \
 175                                         FTIM0_NOR_TEAHC(0x5))
 176 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 177                                         FTIM1_NOR_TRAD_NOR(0x1a) | \
 178                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 179 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 180                                         FTIM2_NOR_TCH(0x4) | \
 181                                         FTIM2_NOR_TWPH(0xe) | \
 182                                         FTIM2_NOR_TWP(0x1c))
 183 #define CONFIG_SYS_NOR_FTIM3            0
 184
 185 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 186 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 187 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 188 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 189
 190 #define CONFIG_SYS_FLASH_EMPTY_INFO
 191 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS, \
 192                                         CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 193
 194 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 195 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 196
 197 /*
 198  * NAND Flash Definitions
 199  */
 200 #define CONFIG_NAND_FSL_IFC
 201
 202 #define CONFIG_SYS_NAND_BASE            0x7e800000
 203 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 204
 205 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 206
 207 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 208                                 | CSPR_PORT_SIZE_8      \
 209                                 | CSPR_MSEL_NAND        \
 210                                 | CSPR_V)
 211 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 212 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 213                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 214                                 | CSOR_NAND_ECC_MODE_8  /* 8-bit ECC */ \
 215                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
 216                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 217                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 218                                 | CSOR_NAND_PB(64))     /* 64 Pages Per Block */
 219
 220 #define CONFIG_SYS_NAND_ONFI_DETECTION
 221
 222 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x7) | \
 223                                         FTIM0_NAND_TWP(0x18)   | \
 224                                         FTIM0_NAND_TWCHT(0x7) | \
 225                                         FTIM0_NAND_TWH(0xa))
 226 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 227                                         FTIM1_NAND_TWBE(0x39)  | \
 228                                         FTIM1_NAND_TRR(0xe)   | \
 229                                         FTIM1_NAND_TRP(0x18))
 230 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0xf) | \
 231                                         FTIM2_NAND_TREH(0xa) | \
 232                                         FTIM2_NAND_TWHRE(0x1e))
 233 #define CONFIG_SYS_NAND_FTIM3           0x0
 234
 235 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 236 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 237 #define CONFIG_MTD_NAND_VERIFY_WRITE
 238 #define CONFIG_CMD_NAND
 239
 240 #define CONFIG_SYS_NAND_BLOCK_SIZE      (256 * 1024)
 241 #endif
 242
 243 #ifdef CONFIG_NAND_BOOT
 244 #define CONFIG_SPL_PAD_TO               0x40000         /* block aligned */
 245 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 246 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
 247 #endif
 248
 249 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 250 #define CONFIG_QIXIS_I2C_ACCESS
 251 #define CONFIG_SYS_I2C_EARLY_INIT
 252 #define CONFIG_SYS_NO_FLASH
 253 #endif
 254
 255 /*
 256  * QIXIS Definitions
 257  */
 258 #define CONFIG_FSL_QIXIS
 259
 260 #ifdef CONFIG_FSL_QIXIS
 261 #define QIXIS_BASE                      0x7fb00000
 262 #define QIXIS_BASE_PHYS                 QIXIS_BASE
 263 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 264 #define QIXIS_LBMAP_SWITCH              6
 265 #define QIXIS_LBMAP_MASK                0x0f
 266 #define QIXIS_LBMAP_SHIFT               0
 267 #define QIXIS_LBMAP_DFLTBANK            0x00
 268 #define QIXIS_LBMAP_ALTBANK             0x04
 269 #define QIXIS_LBMAP_NAND                0x09
 270 #define QIXIS_LBMAP_SD                  0x00
 271 #define QIXIS_LBMAP_SD_QSPI             0xff
 272 #define QIXIS_LBMAP_QSPI                0xff
 273 #define QIXIS_RCW_SRC_NAND              0x110
 274 #define QIXIS_RCW_SRC_SD                0x040
 275 #define QIXIS_RCW_SRC_QSPI              0x045
 276 #define QIXIS_RST_CTL_RESET             0x41
 277 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 278 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 279 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 280
 281 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 282 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
 283                                         CSPR_PORT_SIZE_8 | \
 284                                         CSPR_MSEL_GPCM | \
 285                                         CSPR_V)
 286 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 287 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 288                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 289                                         CSOR_NOR_TRHZ_80)
 290
 291 /*
 292  * QIXIS Timing parameters for IFC GPCM
 293  */
 294 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xc) | \
 295                                         FTIM0_GPCM_TEADC(0x20) | \
 296                                         FTIM0_GPCM_TEAHC(0x10))
 297 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0x50) | \
 298                                         FTIM1_GPCM_TRAD(0x1f))
 299 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0x8) | \
 300                                         FTIM2_GPCM_TCH(0x8) | \
 301                                         FTIM2_GPCM_TWP(0xf0))
 302 #define CONFIG_SYS_FPGA_FTIM3           0x0
 303 #endif
 304
 305 #ifdef CONFIG_NAND_BOOT
 306 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 307 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 308 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 309 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 310 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 311 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 312 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 313 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 314 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 315 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 316 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 317 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 318 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 319 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 320 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 321 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 322 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 323 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 324 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 325 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 326 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 327 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 328 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 329 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 330 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 331 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 332 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
 333 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 334 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_FTIM0
 335 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_FTIM1
 336 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_FTIM2
 337 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_FTIM3
 338 #else
 339 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 340 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 341 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 342 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 343 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 344 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 345 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 346 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 347 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 348 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 349 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 350 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 351 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 352 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 353 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 354 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 355 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 356 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 357 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 358 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 359 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 360 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 361 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 362 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 363 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 364 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 365 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
 366 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 367 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_FTIM0
 368 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_FTIM1
 369 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_FTIM2
 370 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_FTIM3
 371 #endif
 372
 373 /*
 374  * I2C bus multiplexer
 375  */
 376 #define I2C_MUX_PCA_ADDR_PRI            0x77
 377 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 378 #define I2C_RETIMER_ADDR                0x18
 379 #define I2C_MUX_CH_DEFAULT              0x8
 380 #define I2C_MUX_CH_CH7301               0xC
 381 #define I2C_MUX_CH5                     0xD
 382 #define I2C_MUX_CH6                     0xE
 383 #define I2C_MUX_CH7                     0xF
 384
 385 #define I2C_MUX_CH_VOL_MONITOR 0xa
 386
 387 /* Voltage monitor on channel 2*/
 388 #define I2C_VOL_MONITOR_ADDR           0x40
 389 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 390 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 391 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 392
 393 #define CONFIG_VID_FLS_ENV              "ls1046aqds_vdd_mv"
 394 #ifndef CONFIG_SPL_BUILD
 395 #define CONFIG_VID
 396 #endif
 397 #define CONFIG_VOL_MONITOR_IR36021_SET
 398 #define CONFIG_VOL_MONITOR_INA220
 399 /* The lowest and highest voltage allowed for LS1046AQDS */
 400 #define VDD_MV_MIN                      819
 401 #define VDD_MV_MAX                      1212
 402
 403 /*
 404  * Miscellaneous configurable options
 405  */
 406 #define CONFIG_MISC_INIT_R
 407 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 408 #define CONFIG_AUTO_COMPLETE
 409 #define CONFIG_SYS_PBSIZE               \
 410                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 411 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 412
 413 #define CONFIG_SYS_MEMTEST_START        0x80000000
 414 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 415
 416 #define CONFIG_SYS_HZ                   1000
 417
 418 /*
 419  * Stack sizes
 420  * The stack sizes are set up in start.S using the settings below
 421  */
 422 #define CONFIG_STACKSIZE                (30 * 1024)
 423
 424 #define CONFIG_SYS_INIT_SP_OFFSET \
 425         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 426
 427 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 428
 429 /*
 430  * Environment
 431  */
 432 #define CONFIG_ENV_OVERWRITE
 433
 434 #ifdef CONFIG_NAND_BOOT
 435 #define CONFIG_ENV_IS_IN_NAND
 436 #define CONFIG_ENV_SIZE                 0x2000
 437 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 438 #elif defined(CONFIG_SD_BOOT)
 439 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 440 #define CONFIG_ENV_IS_IN_MMC
 441 #define CONFIG_SYS_MMC_ENV_DEV          0
 442 #define CONFIG_ENV_SIZE                 0x2000
 443 #elif defined(CONFIG_QSPI_BOOT)
 444 #define CONFIG_ENV_IS_IN_SPI_FLASH
 445 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 446 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 447 #define CONFIG_ENV_SECT_SIZE            0x10000
 448 #else
 449 #define CONFIG_ENV_IS_IN_FLASH
 450 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x200000)
 451 #define CONFIG_ENV_SECT_SIZE            0x20000
 452 #define CONFIG_ENV_SIZE                 0x20000
 453 #endif
 454
 455 #define CONFIG_CMDLINE_TAG
 456
 457 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 458 #define CONFIG_BOOTCOMMAND              "sf probe && sf read $kernel_load "    \
 459                                         "e0000 f00000 && bootm $kernel_load"
 460 #else
 461 #define CONFIG_BOOTCOMMAND              "cp.b $kernel_start $kernel_load "     \
 462                                         "$kernel_size && bootm $kernel_load"
 463 #endif
 464
 465 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 466 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:2m(uboot)," \
 467                         "14m(free)"
 468 #else
 469 #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
 470                         "1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
 471                         "1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
 472                         "1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
 473                         "1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
 474                         "40m(nor_bank4_fit);7e800000.flash:" \
 475                         "4m(nand_uboot),36m(nand_kernel)," \
 476                         "472m(nand_free);spi0.0:2m(uboot)," \
 477                         "14m(free)"
 478 #endif
 479
 480 #include <asm/fsl_secure_boot.h>
 481
 482 #endif /* __LS1046AQDS_H__ */