include/configs/ls1046aqds.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1046AQDS_H__
   8 #define __LS1046AQDS_H__
   9
  10 #include "ls1046a_common.h"
  11
  12 #define CONFIG_DISPLAY_CPUINFO
  13 #define CONFIG_DISPLAY_BOARDINFO
  14
  15 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
  16 #define CONFIG_SYS_TEXT_BASE            0x82000000
  17 #elif defined(CONFIG_QSPI_BOOT)
  18 #define CONFIG_SYS_TEXT_BASE            0x40010000
  19 #else
  20 #define CONFIG_SYS_TEXT_BASE            0x60100000
  21 #endif
  22
  23 #ifndef __ASSEMBLY__
  24 unsigned long get_board_sys_clk(void);
  25 unsigned long get_board_ddr_clk(void);
  26 #endif
  27
  28 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  29 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  30
  31 #define CONFIG_SKIP_LOWLEVEL_INIT
  32
  33 #define CONFIG_LAYERSCAPE_NS_ACCESS
  34
  35 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  36 /* Physical Memory Map */
  37 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  38 #define CONFIG_NR_DRAM_BANKS            2
  39
  40 #define CONFIG_DDR_SPD
  41 #define SPD_EEPROM_ADDRESS              0x51
  42 #define CONFIG_SYS_SPD_BUS_NUM          0
  43
  44 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  45
  46 #define CONFIG_DDR_ECC
  47 #ifdef CONFIG_DDR_ECC
  48 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  49 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  50 #endif
  51
  52 /* DSPI */
  53 #ifdef CONFIG_FSL_DSPI
  54 #define CONFIG_SPI_FLASH_STMICRO        /* cs0 */
  55 #define CONFIG_SPI_FLASH_SST            /* cs1 */
  56 #define CONFIG_SPI_FLASH_EON            /* cs2 */
  57 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  58 #define CONFIG_SF_DEFAULT_BUS           1
  59 #define CONFIG_SF_DEFAULT_CS            0
  60 #endif
  61 #endif
  62
  63 /* QSPI */
  64 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  65 #ifdef CONFIG_FSL_QSPI
  66 #define CONFIG_SPI_FLASH_SPANSION
  67 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
  68 #define FSL_QSPI_FLASH_NUM              2
  69 #endif
  70 #endif
  71
  72 #ifdef CONFIG_SYS_DPAA_FMAN
  73 #define CONFIG_FMAN_ENET
  74 #define CONFIG_PHYLIB
  75 #define CONFIG_PHY_VITESSE
  76 #define CONFIG_PHY_REALTEK
  77 #define CONFIG_PHYLIB_10G
  78 #define RGMII_PHY1_ADDR         0x1
  79 #define RGMII_PHY2_ADDR         0x2
  80 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
  81 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
  82 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
  83 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
  84 /* PHY address on QSGMII riser card on slot 2 */
  85 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
  86 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
  87 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
  88 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
  89 #endif
  90
  91 #ifdef CONFIG_RAMBOOT_PBL
  92 #define CONFIG_SYS_FSL_PBL_PBI \
  93         board/freescale/ls1046aqds/ls1046aqds_pbi.cfg
  94 #endif
  95
  96 #ifdef CONFIG_NAND_BOOT
  97 #define CONFIG_SYS_FSL_PBL_RCW \
  98         board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg
  99 #endif
 100
 101 #ifdef CONFIG_SD_BOOT
 102 #ifdef CONFIG_SD_BOOT_QSPI
 103 #define CONFIG_SYS_FSL_PBL_RCW \
 104         board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg
 105 #else
 106 #define CONFIG_SYS_FSL_PBL_RCW \
 107         board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg
 108 #endif
 109 #endif
 110
 111 /* IFC */
 112 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 113 #define CONFIG_FSL_IFC
 114 /*
 115  * CONFIG_SYS_FLASH_BASE has the final address (core view)
 116  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
 117  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
 118  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
 119  */
 120 #define CONFIG_SYS_FLASH_BASE                   0x60000000
 121 #define CONFIG_SYS_FLASH_BASE_PHYS              CONFIG_SYS_FLASH_BASE
 122 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 123
 124 #ifndef CONFIG_SYS_NO_FLASH
 125 #define CONFIG_FLASH_CFI_DRIVER
 126 #define CONFIG_SYS_FLASH_CFI
 127 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 128 #define CONFIG_SYS_FLASH_QUIET_TEST
 129 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 130 #endif
 131 #endif
 132
 133 /* SATA */
 134 #define CONFIG_LIBATA
 135 #define CONFIG_SCSI_AHCI
 136 #define CONFIG_SCSI_AHCI_PLAT
 137 #define CONFIG_SCSI
 138 #define CONFIG_DOS_PARTITION
 139 #define CONFIG_BOARD_LATE_INIT
 140
 141 /* EEPROM */
 142 #define CONFIG_ID_EEPROM
 143 #define CONFIG_SYS_I2C_EEPROM_NXID
 144 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 145 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 146 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 147 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 148 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 149
 150 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 151
 152 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 153 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 154 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 155                                                 CONFIG_SYS_SCSI_MAX_LUN)
 156
 157 /*
 158  * IFC Definitions
 159  */
 160 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 161 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 162 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 163                                 CSPR_PORT_SIZE_16 | \
 164                                 CSPR_MSEL_NOR | \
 165                                 CSPR_V)
 166 #define CONFIG_SYS_NOR1_CSPR_EXT        (0x0)
 167 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 168                                 + 0x8000000) | \
 169                                 CSPR_PORT_SIZE_16 | \
 170                                 CSPR_MSEL_NOR | \
 171                                 CSPR_V)
 172 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 173
 174 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 175                                         CSOR_NOR_TRHZ_80)
 176 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 177                                         FTIM0_NOR_TEADC(0x5) | \
 178                                         FTIM0_NOR_TEAHC(0x5))
 179 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 180                                         FTIM1_NOR_TRAD_NOR(0x1a) | \
 181                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 182 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 183                                         FTIM2_NOR_TCH(0x4) | \
 184                                         FTIM2_NOR_TWPH(0xe) | \
 185                                         FTIM2_NOR_TWP(0x1c))
 186 #define CONFIG_SYS_NOR_FTIM3            0
 187
 188 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 189 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 190 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 191 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 192
 193 #define CONFIG_SYS_FLASH_EMPTY_INFO
 194 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS, \
 195                                         CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 196
 197 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 198 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 199
 200 /*
 201  * NAND Flash Definitions
 202  */
 203 #define CONFIG_NAND_FSL_IFC
 204
 205 #define CONFIG_SYS_NAND_BASE            0x7e800000
 206 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 207
 208 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 209
 210 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 211                                 | CSPR_PORT_SIZE_8      \
 212                                 | CSPR_MSEL_NAND        \
 213                                 | CSPR_V)
 214 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 215 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 216                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 217                                 | CSOR_NAND_ECC_MODE_8  /* 8-bit ECC */ \
 218                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
 219                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 220                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 221                                 | CSOR_NAND_PB(64))     /* 64 Pages Per Block */
 222
 223 #define CONFIG_SYS_NAND_ONFI_DETECTION
 224
 225 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x7) | \
 226                                         FTIM0_NAND_TWP(0x18)   | \
 227                                         FTIM0_NAND_TWCHT(0x7) | \
 228                                         FTIM0_NAND_TWH(0xa))
 229 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 230                                         FTIM1_NAND_TWBE(0x39)  | \
 231                                         FTIM1_NAND_TRR(0xe)   | \
 232                                         FTIM1_NAND_TRP(0x18))
 233 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0xf) | \
 234                                         FTIM2_NAND_TREH(0xa) | \
 235                                         FTIM2_NAND_TWHRE(0x1e))
 236 #define CONFIG_SYS_NAND_FTIM3           0x0
 237
 238 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 239 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 240 #define CONFIG_MTD_NAND_VERIFY_WRITE
 241 #define CONFIG_CMD_NAND
 242
 243 #define CONFIG_SYS_NAND_BLOCK_SIZE      (256 * 1024)
 244 #endif
 245
 246 #ifdef CONFIG_NAND_BOOT
 247 #define CONFIG_SPL_PAD_TO               0x40000         /* block aligned */
 248 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 249 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
 250 #endif
 251
 252 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 253 #define CONFIG_QIXIS_I2C_ACCESS
 254 #define CONFIG_SYS_I2C_EARLY_INIT
 255 #define CONFIG_SYS_NO_FLASH
 256 #endif
 257
 258 /*
 259  * QIXIS Definitions
 260  */
 261 #define CONFIG_FSL_QIXIS
 262
 263 #ifdef CONFIG_FSL_QIXIS
 264 #define QIXIS_BASE                      0x7fb00000
 265 #define QIXIS_BASE_PHYS                 QIXIS_BASE
 266 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 267 #define QIXIS_LBMAP_SWITCH              6
 268 #define QIXIS_LBMAP_MASK                0x0f
 269 #define QIXIS_LBMAP_SHIFT               0
 270 #define QIXIS_LBMAP_DFLTBANK            0x00
 271 #define QIXIS_LBMAP_ALTBANK             0x04
 272 #define QIXIS_LBMAP_NAND                0x09
 273 #define QIXIS_LBMAP_SD                  0x00
 274 #define QIXIS_LBMAP_SD_QSPI             0xff
 275 #define QIXIS_LBMAP_QSPI                0xff
 276 #define QIXIS_RCW_SRC_NAND              0x110
 277 #define QIXIS_RCW_SRC_SD                0x040
 278 #define QIXIS_RCW_SRC_QSPI              0x045
 279 #define QIXIS_RST_CTL_RESET             0x41
 280 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 281 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 282 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 283
 284 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 285 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
 286                                         CSPR_PORT_SIZE_8 | \
 287                                         CSPR_MSEL_GPCM | \
 288                                         CSPR_V)
 289 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 290 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 291                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 292                                         CSOR_NOR_TRHZ_80)
 293
 294 /*
 295  * QIXIS Timing parameters for IFC GPCM
 296  */
 297 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xc) | \
 298                                         FTIM0_GPCM_TEADC(0x20) | \
 299                                         FTIM0_GPCM_TEAHC(0x10))
 300 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0x50) | \
 301                                         FTIM1_GPCM_TRAD(0x1f))
 302 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0x8) | \
 303                                         FTIM2_GPCM_TCH(0x8) | \
 304                                         FTIM2_GPCM_TWP(0xf0))
 305 #define CONFIG_SYS_FPGA_FTIM3           0x0
 306 #endif
 307
 308 #ifdef CONFIG_NAND_BOOT
 309 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 310 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 311 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 312 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 313 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 314 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 315 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 316 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 317 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 318 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 319 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 320 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 321 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 322 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 323 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 324 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 325 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 326 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 327 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 328 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 329 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 330 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 331 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 332 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 333 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 334 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 335 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
 336 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 337 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_FTIM0
 338 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_FTIM1
 339 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_FTIM2
 340 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_FTIM3
 341 #else
 342 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 343 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 344 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 345 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 346 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 347 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 348 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 349 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 350 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 351 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 352 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 353 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 354 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 355 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 356 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 357 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 358 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 359 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 360 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 361 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 362 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 363 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 364 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 365 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 366 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 367 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 368 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
 369 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 370 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_FTIM0
 371 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_FTIM1
 372 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_FTIM2
 373 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_FTIM3
 374 #endif
 375
 376 /*
 377  * I2C bus multiplexer
 378  */
 379 #define I2C_MUX_PCA_ADDR_PRI            0x77
 380 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 381 #define I2C_RETIMER_ADDR                0x18
 382 #define I2C_MUX_CH_DEFAULT              0x8
 383 #define I2C_MUX_CH_CH7301               0xC
 384 #define I2C_MUX_CH5                     0xD
 385 #define I2C_MUX_CH6                     0xE
 386 #define I2C_MUX_CH7                     0xF
 387
 388 #define I2C_MUX_CH_VOL_MONITOR 0xa
 389
 390 /* Voltage monitor on channel 2*/
 391 #define I2C_VOL_MONITOR_ADDR           0x40
 392 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 393 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 394 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 395
 396 #define CONFIG_VID_FLS_ENV              "ls1046aqds_vdd_mv"
 397 #ifndef CONFIG_SPL_BUILD
 398 #define CONFIG_VID
 399 #endif
 400 #define CONFIG_VOL_MONITOR_IR36021_SET
 401 #define CONFIG_VOL_MONITOR_INA220
 402 /* The lowest and highest voltage allowed for LS1046AQDS */
 403 #define VDD_MV_MIN                      819
 404 #define VDD_MV_MAX                      1212
 405
 406 /*
 407  * Miscellaneous configurable options
 408  */
 409 #define CONFIG_MISC_INIT_R
 410 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 411 #define CONFIG_AUTO_COMPLETE
 412 #define CONFIG_SYS_PBSIZE               \
 413                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 414 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 415
 416 #define CONFIG_SYS_MEMTEST_START        0x80000000
 417 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 418
 419 #define CONFIG_SYS_HZ                   1000
 420
 421 /*
 422  * Stack sizes
 423  * The stack sizes are set up in start.S using the settings below
 424  */
 425 #define CONFIG_STACKSIZE                (30 * 1024)
 426
 427 #define CONFIG_SYS_INIT_SP_OFFSET \
 428         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 429
 430 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 431
 432 /*
 433  * Environment
 434  */
 435 #define CONFIG_ENV_OVERWRITE
 436
 437 #ifdef CONFIG_NAND_BOOT
 438 #define CONFIG_ENV_IS_IN_NAND
 439 #define CONFIG_ENV_SIZE                 0x2000
 440 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 441 #elif defined(CONFIG_SD_BOOT)
 442 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 443 #define CONFIG_ENV_IS_IN_MMC
 444 #define CONFIG_SYS_MMC_ENV_DEV          0
 445 #define CONFIG_ENV_SIZE                 0x2000
 446 #elif defined(CONFIG_QSPI_BOOT)
 447 #define CONFIG_ENV_IS_IN_SPI_FLASH
 448 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 449 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 450 #define CONFIG_ENV_SECT_SIZE            0x10000
 451 #else
 452 #define CONFIG_ENV_IS_IN_FLASH
 453 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x200000)
 454 #define CONFIG_ENV_SECT_SIZE            0x20000
 455 #define CONFIG_ENV_SIZE                 0x20000
 456 #endif
 457
 458 #define CONFIG_CMDLINE_TAG
 459
 460 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 461 #define CONFIG_BOOTCOMMAND              "sf probe && sf read $kernel_load "    \
 462                                         "e0000 f00000 && bootm $kernel_load"
 463 #else
 464 #define CONFIG_BOOTCOMMAND              "cp.b $kernel_start $kernel_load "     \
 465                                         "$kernel_size && bootm $kernel_load"
 466 #endif
 467
 468 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 469 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:2m(uboot)," \
 470                         "14m(free)"
 471 #else
 472 #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
 473                         "1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
 474                         "1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
 475                         "1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
 476                         "1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
 477                         "40m(nor_bank4_fit);7e800000.flash:" \
 478                         "4m(nand_uboot),36m(nand_kernel)," \
 479                         "472m(nand_free);spi0.0:2m(uboot)," \
 480                         "14m(free)"
 481 #endif
 482
 483 #include <asm/fsl_secure_boot.h>
 484
 485 #endif /* __LS1046AQDS_H__ */