include/configs/ls1046ardb.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1046ARDB_H__
   8 #define __LS1046ARDB_H__
   9
  10 #include "ls1046a_common.h"
  11
  12 #ifdef CONFIG_SD_BOOT
  13 #define CONFIG_SYS_TEXT_BASE            0x82000000
  14 #else
  15 #define CONFIG_SYS_TEXT_BASE            0x40100000
  16 #endif
  17
  18 #define CONFIG_SYS_CLK_FREQ             100000000
  19 #define CONFIG_DDR_CLK_FREQ             100000000
  20
  21 #define CONFIG_LAYERSCAPE_NS_ACCESS
  22 #define CONFIG_MISC_INIT_R
  23
  24 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  25 /* Physical Memory Map */
  26 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  27 #define CONFIG_NR_DRAM_BANKS            2
  28
  29 #define CONFIG_DDR_SPD
  30 #define SPD_EEPROM_ADDRESS              0x51
  31 #define CONFIG_SYS_SPD_BUS_NUM          0
  32
  33 #define CONFIG_DDR_ECC
  34 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  35 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  36 #define CONFIG_FSL_DDR_BIST     /* enable built-in memory test */
  37 #ifndef CONFIG_SPL
  38 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  39 #endif
  40
  41 #ifdef CONFIG_RAMBOOT_PBL
  42 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
  43 #endif
  44
  45 #ifdef CONFIG_SD_BOOT
  46 #ifdef CONFIG_EMMC_BOOT
  47 #define CONFIG_SYS_FSL_PBL_RCW \
  48         board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
  49 #else
  50 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
  51 #endif
  52 #endif
  53
  54 #ifndef SPL_NO_IFC
  55 /* IFC */
  56 #define CONFIG_FSL_IFC
  57 /*
  58  * NAND Flash Definitions
  59  */
  60 #define CONFIG_NAND_FSL_IFC
  61 #endif
  62
  63 #define CONFIG_SYS_NAND_BASE            0x7e800000
  64 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
  65
  66 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  67 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  68                                 | CSPR_PORT_SIZE_8      \
  69                                 | CSPR_MSEL_NAND        \
  70                                 | CSPR_V)
  71 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
  72 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
  73                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
  74                                 | CSOR_NAND_ECC_MODE_8  /* 8-bit ECC */ \
  75                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
  76                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
  77                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
  78                                 | CSOR_NAND_PB(64))     /* 64 Pages Per Block */
  79
  80 #define CONFIG_SYS_NAND_ONFI_DETECTION
  81
  82 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x7) | \
  83                                         FTIM0_NAND_TWP(0x18)   | \
  84                                         FTIM0_NAND_TWCHT(0x7) | \
  85                                         FTIM0_NAND_TWH(0xa))
  86 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
  87                                         FTIM1_NAND_TWBE(0x39)  | \
  88                                         FTIM1_NAND_TRR(0xe)   | \
  89                                         FTIM1_NAND_TRP(0x18))
  90 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0xf) | \
  91                                         FTIM2_NAND_TREH(0xa) | \
  92                                         FTIM2_NAND_TWHRE(0x1e))
  93 #define CONFIG_SYS_NAND_FTIM3           0x0
  94
  95 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
  96 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  97 #define CONFIG_MTD_NAND_VERIFY_WRITE
  98 #define CONFIG_CMD_NAND
  99
 100 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 101
 102 /*
 103  * CPLD
 104  */
 105 #define CONFIG_SYS_CPLD_BASE            0x7fb00000
 106 #define CPLD_BASE_PHYS                  CONFIG_SYS_CPLD_BASE
 107
 108 #define CONFIG_SYS_CPLD_CSPR_EXT        (0x0)
 109 #define CONFIG_SYS_CPLD_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 110                                         CSPR_PORT_SIZE_8 | \
 111                                         CSPR_MSEL_GPCM | \
 112                                         CSPR_V)
 113 #define CONFIG_SYS_CPLD_AMASK           IFC_AMASK(64 * 1024)
 114 #define CONFIG_SYS_CPLD_CSOR            CSOR_NOR_ADM_SHIFT(16)
 115
 116 /* CPLD Timing parameters for IFC GPCM */
 117 #define CONFIG_SYS_CPLD_FTIM0           (FTIM0_GPCM_TACSE(0x0e) | \
 118                                         FTIM0_GPCM_TEADC(0x0e) | \
 119                                         FTIM0_GPCM_TEAHC(0x0e))
 120 #define CONFIG_SYS_CPLD_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 121                                         FTIM1_GPCM_TRAD(0x3f))
 122 #define CONFIG_SYS_CPLD_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 123                                         FTIM2_GPCM_TCH(0xf) | \
 124                                         FTIM2_GPCM_TWP(0x3E))
 125 #define CONFIG_SYS_CPLD_FTIM3           0x0
 126
 127 /* IFC Timing Params */
 128 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 129 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 130 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 131 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 132 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 133 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 134 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 135 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 136
 137 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_CPLD_CSPR_EXT
 138 #define CONFIG_SYS_CSPR2                CONFIG_SYS_CPLD_CSPR
 139 #define CONFIG_SYS_AMASK2               CONFIG_SYS_CPLD_AMASK
 140 #define CONFIG_SYS_CSOR2                CONFIG_SYS_CPLD_CSOR
 141 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_CPLD_FTIM0
 142 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_CPLD_FTIM1
 143 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_CPLD_FTIM2
 144 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_CPLD_FTIM3
 145
 146 /* EEPROM */
 147 #define CONFIG_ID_EEPROM
 148 #define CONFIG_SYS_I2C_EEPROM_NXID
 149 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 150 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 151 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 152 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 153 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 154 #define I2C_RETIMER_ADDR                        0x18
 155
 156 /* PMIC */
 157 #define CONFIG_POWER
 158 #ifdef CONFIG_POWER
 159 #define CONFIG_POWER_I2C
 160 #endif
 161
 162 /*
 163  * Environment
 164  */
 165 #ifndef SPL_NO_ENV
 166 #define CONFIG_ENV_OVERWRITE
 167 #endif
 168
 169 #if defined(CONFIG_SD_BOOT)
 170 #define CONFIG_SYS_MMC_ENV_DEV          0
 171 #define CONFIG_ENV_OFFSET               (3 * 1024 * 1024)
 172 #define CONFIG_ENV_SIZE                 0x2000
 173 #else
 174 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 175 #define CONFIG_ENV_OFFSET               0x300000        /* 3MB */
 176 #define CONFIG_ENV_SECT_SIZE            0x40000         /* 256KB */
 177 #endif
 178
 179 #define AQR105_IRQ_MASK                 0x80000000
 180 /* FMan */
 181 #ifndef SPL_NO_FMAN
 182
 183 #ifdef CONFIG_NET
 184 #define CONFIG_PHYLIB
 185 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 186 #define CONFIG_PHY_REALTEK
 187 #endif
 188
 189 #ifdef CONFIG_SYS_DPAA_FMAN
 190 #define CONFIG_FMAN_ENET
 191 #define CONFIG_PHY_AQUANTIA
 192 #define CONFIG_PHYLIB_10G
 193 #define RGMII_PHY1_ADDR                 0x1
 194 #define RGMII_PHY2_ADDR                 0x2
 195
 196 #define SGMII_PHY1_ADDR                 0x3
 197 #define SGMII_PHY2_ADDR                 0x4
 198
 199 #define FM1_10GEC1_PHY_ADDR             0x0
 200
 201 #define CONFIG_ETHPRIME                 "FM1@DTSEC3"
 202 #endif
 203
 204 #endif
 205
 206 /* QSPI device */
 207 #ifndef SPL_NO_QSPI
 208 #ifdef CONFIG_FSL_QSPI
 209 #define CONFIG_SPI_FLASH_SPANSION
 210 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
 211 #define FSL_QSPI_FLASH_NUM              2
 212 #endif
 213 #endif
 214
 215 /* USB */
 216 #ifndef SPL_NO_USB
 217 #define CONFIG_HAS_FSL_XHCI_USB
 218 #ifdef CONFIG_HAS_FSL_XHCI_USB
 219 #define CONFIG_USB_XHCI_HCD
 220 #define CONFIG_USB_XHCI_FSL
 221 #define CONFIG_USB_XHCI_DWC3
 222 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
 223 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 224 #define CONFIG_USB_STORAGE
 225 #endif
 226 #endif
 227
 228 /* SATA */
 229 #ifndef SPL_NO_SATA
 230 #define CONFIG_LIBATA
 231 #define CONFIG_SCSI_AHCI
 232 #define CONFIG_SCSI_AHCI_PLAT
 233
 234 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 235
 236 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 237 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 238 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 239                                                 CONFIG_SYS_SCSI_MAX_LUN)
 240 #endif
 241
 242 #ifndef SPL_NO_MISC
 243 #undef CONFIG_BOOTCOMMAND
 244 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"  \
 245                            "&& esbc_halt; run qspi_bootcmd;"
 246 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
 247                         "15m(u-boot),48m(kernel.itb);" \
 248                         "7e800000.flash:16m(nand_uboot)," \
 249                         "48m(nand_kernel),448m(nand_free)"
 250 #endif
 251
 252 #include <asm/fsl_secure_boot.h>
 253
 254 #endif /* __LS1046ARDB_H__ */