include/configs/ls1046ardb.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1046ARDB_H__
   8 #define __LS1046ARDB_H__
   9
  10 #include "ls1046a_common.h"
  11
  12 #if defined(CONFIG_FSL_LS_PPA)
  13 #define CONFIG_ARMV8_PSCI
  14 #define CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
  15 #define CONFIG_SYS_LS_PPA_DRAM_BLOCK_MIN_SIZE           (1UL * 1024 * 1024)
  16
  17 #define CONFIG_SYS_LS_PPA_FW_IN_XIP
  18 #ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
  19 #define CONFIG_SYS_LS_PPA_FW_ADDR       0x40500000
  20 #endif
  21 #endif
  22
  23 #ifdef CONFIG_SD_BOOT
  24 #define CONFIG_SYS_TEXT_BASE            0x82000000
  25 #else
  26 #define CONFIG_SYS_TEXT_BASE            0x40100000
  27 #endif
  28
  29 #define CONFIG_SYS_CLK_FREQ             100000000
  30 #define CONFIG_DDR_CLK_FREQ             100000000
  31
  32 #define CONFIG_LAYERSCAPE_NS_ACCESS
  33 #define CONFIG_MISC_INIT_R
  34
  35 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  36 /* Physical Memory Map */
  37 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  38 #define CONFIG_NR_DRAM_BANKS            2
  39
  40 #define CONFIG_DDR_SPD
  41 #define SPD_EEPROM_ADDRESS              0x51
  42 #define CONFIG_SYS_SPD_BUS_NUM          0
  43
  44 #define CONFIG_DDR_ECC
  45 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  46 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  47 #define CONFIG_FSL_DDR_BIST     /* enable built-in memory test */
  48 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  49
  50 #ifdef CONFIG_RAMBOOT_PBL
  51 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
  52 #endif
  53
  54 #ifdef CONFIG_SD_BOOT
  55 #ifdef CONFIG_EMMC_BOOT
  56 #define CONFIG_SYS_FSL_PBL_RCW \
  57         board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
  58 #else
  59 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
  60 #endif
  61 #endif
  62
  63 /* No NOR flash */
  64 #define CONFIG_SYS_NO_FLASH
  65
  66 /* IFC */
  67 #define CONFIG_FSL_IFC
  68
  69 /*
  70  * NAND Flash Definitions
  71  */
  72 #define CONFIG_NAND_FSL_IFC
  73
  74 #define CONFIG_SYS_NAND_BASE            0x7e800000
  75 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
  76
  77 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  78 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  79                                 | CSPR_PORT_SIZE_8      \
  80                                 | CSPR_MSEL_NAND        \
  81                                 | CSPR_V)
  82 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
  83 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
  84                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
  85                                 | CSOR_NAND_ECC_MODE_8  /* 8-bit ECC */ \
  86                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
  87                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
  88                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
  89                                 | CSOR_NAND_PB(64))     /* 64 Pages Per Block */
  90
  91 #define CONFIG_SYS_NAND_ONFI_DETECTION
  92
  93 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x7) | \
  94                                         FTIM0_NAND_TWP(0x18)   | \
  95                                         FTIM0_NAND_TWCHT(0x7) | \
  96                                         FTIM0_NAND_TWH(0xa))
  97 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
  98                                         FTIM1_NAND_TWBE(0x39)  | \
  99                                         FTIM1_NAND_TRR(0xe)   | \
 100                                         FTIM1_NAND_TRP(0x18))
 101 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0xf) | \
 102                                         FTIM2_NAND_TREH(0xa) | \
 103                                         FTIM2_NAND_TWHRE(0x1e))
 104 #define CONFIG_SYS_NAND_FTIM3           0x0
 105
 106 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 107 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 108 #define CONFIG_MTD_NAND_VERIFY_WRITE
 109 #define CONFIG_CMD_NAND
 110
 111 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 112
 113 /*
 114  * CPLD
 115  */
 116 #define CONFIG_SYS_CPLD_BASE            0x7fb00000
 117 #define CPLD_BASE_PHYS                  CONFIG_SYS_CPLD_BASE
 118
 119 #define CONFIG_SYS_CPLD_CSPR_EXT        (0x0)
 120 #define CONFIG_SYS_CPLD_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 121                                         CSPR_PORT_SIZE_8 | \
 122                                         CSPR_MSEL_GPCM | \
 123                                         CSPR_V)
 124 #define CONFIG_SYS_CPLD_AMASK           IFC_AMASK(64 * 1024)
 125 #define CONFIG_SYS_CPLD_CSOR            CSOR_NOR_ADM_SHIFT(16)
 126
 127 /* CPLD Timing parameters for IFC GPCM */
 128 #define CONFIG_SYS_CPLD_FTIM0           (FTIM0_GPCM_TACSE(0x0e) | \
 129                                         FTIM0_GPCM_TEADC(0x0e) | \
 130                                         FTIM0_GPCM_TEAHC(0x0e))
 131 #define CONFIG_SYS_CPLD_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 132                                         FTIM1_GPCM_TRAD(0x3f))
 133 #define CONFIG_SYS_CPLD_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 134                                         FTIM2_GPCM_TCH(0xf) | \
 135                                         FTIM2_GPCM_TWP(0x3E))
 136 #define CONFIG_SYS_CPLD_FTIM3           0x0
 137
 138 /* IFC Timing Params */
 139 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 140 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 141 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 142 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 143 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 144 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 145 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 146 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 147
 148 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_CPLD_CSPR_EXT
 149 #define CONFIG_SYS_CSPR2                CONFIG_SYS_CPLD_CSPR
 150 #define CONFIG_SYS_AMASK2               CONFIG_SYS_CPLD_AMASK
 151 #define CONFIG_SYS_CSOR2                CONFIG_SYS_CPLD_CSOR
 152 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_CPLD_FTIM0
 153 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_CPLD_FTIM1
 154 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_CPLD_FTIM2
 155 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_CPLD_FTIM3
 156
 157 /* EEPROM */
 158 #define CONFIG_ID_EEPROM
 159 #define CONFIG_SYS_I2C_EEPROM_NXID
 160 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 161 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 162 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 163 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 164 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 165 #define I2C_RETIMER_ADDR                        0x18
 166
 167 /*
 168  * Environment
 169  */
 170 #define CONFIG_ENV_OVERWRITE
 171
 172 #if defined(CONFIG_SD_BOOT)
 173 #define CONFIG_ENV_IS_IN_MMC
 174 #define CONFIG_SYS_MMC_ENV_DEV          0
 175 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 176 #define CONFIG_ENV_SIZE                 0x2000
 177 #else
 178 #define CONFIG_ENV_IS_IN_SPI_FLASH
 179 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 180 #define CONFIG_ENV_OFFSET               0x200000        /* 2MB */
 181 #define CONFIG_ENV_SECT_SIZE            0x40000         /* 256KB */
 182 #endif
 183
 184 /* FMan */
 185 #ifdef CONFIG_SYS_DPAA_FMAN
 186 #define CONFIG_FMAN_ENET
 187 #define CONFIG_PHYLIB
 188 #define CONFIG_PHYLIB_10G
 189 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 190
 191 #define CONFIG_PHY_REALTEK
 192 #define CONFIG_PHY_AQUANTIA
 193 #define AQR105_IRQ_MASK                 0x80000000
 194
 195 #define RGMII_PHY1_ADDR                 0x1
 196 #define RGMII_PHY2_ADDR                 0x2
 197
 198 #define SGMII_PHY1_ADDR                 0x3
 199 #define SGMII_PHY2_ADDR                 0x4
 200
 201 #define FM1_10GEC1_PHY_ADDR             0x0
 202
 203 #define CONFIG_ETHPRIME                 "FM1@DTSEC3"
 204 #endif
 205
 206 /* QSPI device */
 207 #ifdef CONFIG_FSL_QSPI
 208 #define CONFIG_SPI_FLASH_SPANSION
 209 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
 210 #define FSL_QSPI_FLASH_NUM              2
 211 #define CONFIG_SPI_FLASH_BAR
 212 #endif
 213
 214 /* SATA */
 215 #define CONFIG_LIBATA
 216 #define CONFIG_SCSI_AHCI
 217 #define CONFIG_SCSI_AHCI_PLAT
 218 #define CONFIG_SCSI
 219 #define CONFIG_DOS_PARTITION
 220 #define CONFIG_BOARD_LATE_INIT
 221
 222 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 223
 224 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 225 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 226 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 227                                                 CONFIG_SYS_SCSI_MAX_LUN)
 228 #define CONFIG_BOOTCOMMAND              "sf probe 0:0;sf read $kernel_load" \
 229                                         "$kernel_start $kernel_size;" \
 230                                         "bootm $kernel_load"
 231
 232 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
 233                         "15m(u-boot),48m(kernel.itb);" \
 234                         "7e800000.flash:16m(nand_uboot)," \
 235                         "48m(nand_kernel),448m(nand_free)"
 236
 237 #endif /* __LS1046ARDB_H__ */