include/configs/ls2080a_common.h

   1 /*
   2  * Copyright (C) 2014 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS2_COMMON_H
   8 #define __LS2_COMMON_H
   9
  10 #define CONFIG_REMAKE_ELF
  11 #define CONFIG_FSL_LAYERSCAPE
  12 #define CONFIG_MP
  13 #define CONFIG_GICV3
  14 #define CONFIG_FSL_TZPC_BP147
  15
  16 #include <asm/arch/ls2080a_stream_id.h>
  17 #include <asm/arch/config.h>
  18
  19 /* Link Definitions */
  20 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  21
  22 /* We need architecture specific misc initializations */
  23
  24 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  25
  26 /* Link Definitions */
  27 #ifndef CONFIG_QSPI_BOOT
  28 #ifdef CONFIG_SPL
  29 #define CONFIG_SYS_TEXT_BASE            0x80400000
  30 #else
  31 #define CONFIG_SYS_TEXT_BASE            0x30100000
  32 #endif
  33 #endif
  34
  35 #define CONFIG_SUPPORT_RAW_INITRD
  36
  37 #define CONFIG_SKIP_LOWLEVEL_INIT
  38
  39 #ifndef CONFIG_SPL
  40 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  41 #endif
  42 #ifndef CONFIG_SYS_FSL_DDR4
  43 #define CONFIG_SYS_DDR_RAW_TIMING
  44 #endif
  45
  46 #define CONFIG_SYS_FSL_DDR_INTLV_256B   /* force 256 byte interleaving */
  47
  48 #define CONFIG_VERY_BIG_RAM
  49 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
  50 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  51 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  52 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x8080000000ULL
  53 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS       2
  54
  55 /*
  56  * SMP Definitinos
  57  */
  58 #define CPU_RELEASE_ADDR                secondary_boot_func
  59
  60 #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
  61 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
  62 #define CONFIG_SYS_DP_DDR_BASE          0x6000000000ULL
  63 /*
  64  * DDR controller use 0 as the base address for binding.
  65  * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
  66  */
  67 #define CONFIG_SYS_DP_DDR_BASE_PHY      0
  68 #define CONFIG_DP_DDR_CTRL              2
  69 #define CONFIG_DP_DDR_NUM_CTRLS         1
  70 #endif
  71
  72 /* Generic Timer Definitions */
  73 /*
  74  * This is not an accurate number. It is used in start.S. The frequency
  75  * will be udpated later when get_bus_freq(0) is available.
  76  */
  77 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  78
  79 /* Size of malloc() pool */
  80 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2048 * 1024)
  81
  82 /* I2C */
  83 #define CONFIG_SYS_I2C
  84 #define CONFIG_SYS_I2C_MXC
  85 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  86 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  87 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  88 #define CONFIG_SYS_I2C_MXC_I2C4         /* enable I2C bus 4 */
  89
  90 /* Serial Port */
  91 #define CONFIG_CONS_INDEX       1
  92 #define CONFIG_SYS_NS16550_SERIAL
  93 #define CONFIG_SYS_NS16550_REG_SIZE     1
  94 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  95
  96 #define CONFIG_BAUDRATE                 115200
  97 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  98
  99 /* IFC */
 100 #define CONFIG_FSL_IFC
 101
 102 /*
 103  * During booting, IFC is mapped at the region of 0x30000000.
 104  * But this region is limited to 256MB. To accommodate NOR, promjet
 105  * and FPGA. This region is divided as below:
 106  * 0x30000000 - 0x37ffffff : 128MB : NOR flash
 107  * 0x38000000 - 0x3BFFFFFF : 64MB  : Promjet
 108  * 0x3C000000 - 0x40000000 : 64MB  : FPGA etc
 109  *
 110  * To accommodate bigger NOR flash and other devices, we will map IFC
 111  * chip selects to as below:
 112  * 0x5_1000_0000..0x5_1fff_ffff Memory Hole
 113  * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
 114  * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
 115  * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
 116  * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
 117  *
 118  * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
 119  * CONFIG_SYS_FLASH_BASE has the final address (core view)
 120  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
 121  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
 122  * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
 123  */
 124
 125 #define CONFIG_SYS_FLASH_BASE                   0x580000000ULL
 126 #define CONFIG_SYS_FLASH_BASE_PHYS              0x80000000
 127 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 128
 129 #define CONFIG_SYS_FLASH1_BASE_PHYS             0xC0000000
 130 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY       0x8000000
 131
 132 #ifndef __ASSEMBLY__
 133 unsigned long long get_qixis_addr(void);
 134 #endif
 135 #define QIXIS_BASE                              get_qixis_addr()
 136 #define QIXIS_BASE_PHYS                         0x20000000
 137 #define QIXIS_BASE_PHYS_EARLY                   0xC000000
 138 #define QIXIS_STAT_PRES1                        0xb
 139 #define QIXIS_SDID_MASK                         0x07
 140 #define QIXIS_ESDHC_NO_ADAPTER                  0x7
 141
 142 #define CONFIG_SYS_NAND_BASE                    0x530000000ULL
 143 #define CONFIG_SYS_NAND_BASE_PHYS               0x30000000
 144
 145 /* MC firmware */
 146 #define CONFIG_FSL_MC_ENET
 147 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */
 148 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH     0x20000
 149 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET    0x00F00000
 150 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH     0x20000
 151 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET    0x00F20000
 152 /* For LS2085A */
 153 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH    0x200000
 154 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET   0x07000000
 155
 156 /*
 157  * Carve out a DDR region which will not be used by u-boot/Linux
 158  *
 159  * It will be used by MC and Debug Server. The MC region must be
 160  * 512MB aligned, so the min size to hide is 512MB.
 161  */
 162 #ifdef CONFIG_FSL_MC_ENET
 163 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE            (512UL * 1024 * 1024)
 164 #define CONFIG_SYS_MC_RSV_MEM_ALIGN                     (512UL * 1024 * 1024)
 165 #endif
 166
 167 /* Command line configuration */
 168 #define CONFIG_CMD_ENV
 169
 170 /* Miscellaneous configurable options */
 171 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 172
 173 /* Physical Memory Map */
 174 /* fixme: these need to be checked against the board */
 175 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 176
 177 #define CONFIG_NR_DRAM_BANKS            3
 178
 179 #define CONFIG_HWCONFIG
 180 #define HWCONFIG_BUFFER_SIZE            128
 181
 182 /* Allow to overwrite serial and ethaddr */
 183 #define CONFIG_ENV_OVERWRITE
 184
 185 /* Initial environment variables */
 186 #define CONFIG_EXTRA_ENV_SETTINGS               \
 187         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 188         "loadaddr=0x80100000\0"                 \
 189         "kernel_addr=0x100000\0"                \
 190         "ramdisk_addr=0x800000\0"               \
 191         "ramdisk_size=0x2000000\0"              \
 192         "fdt_high=0xa0000000\0"                 \
 193         "initrd_high=0xffffffffffffffff\0"      \
 194         "kernel_start=0x581200000\0"            \
 195         "kernel_load=0xa0000000\0"              \
 196         "kernel_size=0x2800000\0"               \
 197         "console=ttyAMA0,38400n8\0"             \
 198         "mcinitcmd=fsl_mc start mc 0x580300000" \
 199         " 0x580800000 \0"
 200
 201 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/ram0 " \
 202                                 "earlycon=uart8250,mmio,0x21c0500 " \
 203                                 "ramdisk_size=0x2000000 default_hugepagesz=2m" \
 204                                 " hugepagesz=2m hugepages=256"
 205 #define CONFIG_BOOTCOMMAND      "fsl_mc apply dpl 0x580700000 &&" \
 206                                 " cp.b $kernel_start $kernel_load" \
 207                                 " $kernel_size && bootm $kernel_load"
 208
 209 /* Monitor Command Prompt */
 210 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 211 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 212                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 213 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
 214 #define CONFIG_SYS_LONGHELP
 215 #define CONFIG_CMDLINE_EDITING          1
 216 #define CONFIG_AUTO_COMPLETE
 217 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 218
 219 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 220
 221 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 222 #define CONFIG_SPL_BSS_MAX_SIZE         0x00100000
 223 #define CONFIG_SPL_FRAMEWORK
 224 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 225 #define CONFIG_SPL_MAX_SIZE             0x16000
 226 #define CONFIG_SPL_STACK                (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 227 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 228 #define CONFIG_SPL_TEXT_BASE            0x1800a000
 229
 230 #define CONFIG_SYS_NAND_U_BOOT_DST      0x80400000
 231 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 232 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00100000
 233 #define CONFIG_SYS_SPL_MALLOC_START     0x80200000
 234 #define CONFIG_SYS_MONITOR_LEN          (640 * 1024)
 235
 236 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 237
 238 /* Hash command with SHA acceleration supported in hardware */
 239 #ifdef CONFIG_FSL_CAAM
 240 #define CONFIG_CMD_HASH
 241 #define CONFIG_SHA_HW_ACCEL
 242 #endif
 243
 244 #endif /* __LS2_COMMON_H */