include/configs/ls2085a_common.h

   1 /*
   2  * Copyright (C) 2014 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS2_COMMON_H
   8 #define __LS2_COMMON_H
   9
  10
  11 #define CONFIG_REMAKE_ELF
  12 #define CONFIG_FSL_LAYERSCAPE
  13 #define CONFIG_FSL_LSCH3
  14 #define CONFIG_LS2085A
  15 #define CONFIG_MP
  16 #define CONFIG_GICV3
  17 #define CONFIG_FSL_TZPC_BP147
  18
  19 /* Errata fixes */
  20 #define CONFIG_ARM_ERRATA_828024
  21 #define CONFIG_ARM_ERRATA_826974
  22
  23 #include <asm/arch/ls2085a_stream_id.h>
  24 #include <asm/arch/config.h>
  25 #if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2))
  26 #define CONFIG_SYS_HAS_SERDES
  27 #endif
  28
  29 /* Link Definitions */
  30 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  31
  32 /* We need architecture specific misc initializations */
  33 #define CONFIG_ARCH_MISC_INIT
  34
  35 /* Link Definitions */
  36 #ifdef CONFIG_SPL
  37 #define CONFIG_SYS_TEXT_BASE            0x80400000
  38 #else
  39 #define CONFIG_SYS_TEXT_BASE            0x30100000
  40 #endif
  41
  42 #ifdef CONFIG_EMU
  43 #define CONFIG_SYS_NO_FLASH
  44 #endif
  45
  46 #define CONFIG_SUPPORT_RAW_INITRD
  47
  48 #define CONFIG_SKIP_LOWLEVEL_INIT
  49 #define CONFIG_BOARD_EARLY_INIT_F       1
  50
  51 /* Flat Device Tree Definitions */
  52 #define CONFIG_OF_LIBFDT
  53 #define CONFIG_OF_BOARD_SETUP
  54 #define CONFIG_OF_STDOUT_VIA_ALIAS
  55
  56 /* new uImage format support */
  57 #define CONFIG_FIT
  58 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
  59
  60 #ifndef CONFIG_SPL
  61 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  62 #endif
  63 #ifndef CONFIG_SYS_FSL_DDR4
  64 #define CONFIG_SYS_FSL_DDR3             /* Use DDR3 memory */
  65 #define CONFIG_SYS_DDR_RAW_TIMING
  66 #endif
  67
  68 #define CONFIG_SYS_FSL_DDR_INTLV_256B   /* force 256 byte interleaving */
  69
  70 #define CONFIG_VERY_BIG_RAM
  71 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
  72 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  73 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  74 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x8080000000ULL
  75 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS       2
  76
  77 /*
  78  * SMP Definitinos
  79  */
  80 #define CPU_RELEASE_ADDR                secondary_boot_func
  81
  82 #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
  83 #define CONFIG_SYS_DP_DDR_BASE          0x6000000000ULL
  84 /*
  85  * DDR controller use 0 as the base address for binding.
  86  * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
  87  */
  88 #define CONFIG_SYS_DP_DDR_BASE_PHY      0
  89 #define CONFIG_DP_DDR_CTRL              2
  90 #define CONFIG_DP_DDR_NUM_CTRLS         1
  91
  92 /* Generic Timer Definitions */
  93 /*
  94  * This is not an accurate number. It is used in start.S. The frequency
  95  * will be udpated later when get_bus_freq(0) is available.
  96  */
  97 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  98
  99 /* Size of malloc() pool */
 100 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2048 * 1024)
 101
 102 /* I2C */
 103 #define CONFIG_CMD_I2C
 104 #define CONFIG_SYS_I2C
 105 #define CONFIG_SYS_I2C_MXC
 106 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 107 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 108 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 109 #define CONFIG_SYS_I2C_MXC_I2C4         /* enable I2C bus 4 */
 110
 111 /* Serial Port */
 112 #define CONFIG_CONS_INDEX       1
 113 #define CONFIG_SYS_NS16550_SERIAL
 114 #define CONFIG_SYS_NS16550_REG_SIZE     1
 115 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 116
 117 #define CONFIG_BAUDRATE                 115200
 118 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 119
 120 /* IFC */
 121 #define CONFIG_FSL_IFC
 122
 123 /*
 124  * During booting, IFC is mapped at the region of 0x30000000.
 125  * But this region is limited to 256MB. To accommodate NOR, promjet
 126  * and FPGA. This region is divided as below:
 127  * 0x30000000 - 0x37ffffff : 128MB : NOR flash
 128  * 0x38000000 - 0x3BFFFFFF : 64MB  : Promjet
 129  * 0x3C000000 - 0x40000000 : 64MB  : FPGA etc
 130  *
 131  * To accommodate bigger NOR flash and other devices, we will map IFC
 132  * chip selects to as below:
 133  * 0x5_1000_0000..0x5_1fff_ffff Memory Hole
 134  * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
 135  * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
 136  * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
 137  * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
 138  *
 139  * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
 140  * CONFIG_SYS_FLASH_BASE has the final address (core view)
 141  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
 142  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
 143  * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
 144  */
 145
 146 #define CONFIG_SYS_FLASH_BASE                   0x580000000ULL
 147 #define CONFIG_SYS_FLASH_BASE_PHYS              0x80000000
 148 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 149
 150 #define CONFIG_SYS_FLASH1_BASE_PHYS             0xC0000000
 151 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY       0x8000000
 152
 153 #ifndef CONFIG_SYS_NO_FLASH
 154 #define CONFIG_FLASH_CFI_DRIVER
 155 #define CONFIG_SYS_FLASH_CFI
 156 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 157 #define CONFIG_SYS_FLASH_QUIET_TEST
 158 #endif
 159
 160 #ifndef __ASSEMBLY__
 161 unsigned long long get_qixis_addr(void);
 162 #endif
 163 #define QIXIS_BASE                              get_qixis_addr()
 164 #define QIXIS_BASE_PHYS                         0x20000000
 165 #define QIXIS_BASE_PHYS_EARLY                   0xC000000
 166 #define QIXIS_STAT_PRES1                        0xb
 167 #define QIXIS_SDID_MASK                         0x07
 168 #define QIXIS_ESDHC_NO_ADAPTER                  0x7
 169
 170 #define CONFIG_SYS_NAND_BASE                    0x530000000ULL
 171 #define CONFIG_SYS_NAND_BASE_PHYS               0x30000000
 172
 173 /* Debug Server firmware */
 174 #define CONFIG_FSL_DEBUG_SERVER
 175 /* 2 sec timeout */
 176 #define CONFIG_SYS_DEBUG_SERVER_TIMEOUT                 (2 * 1000 * 1000)
 177
 178 /* MC firmware */
 179 #define CONFIG_FSL_MC_ENET
 180 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */
 181 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH     0x20000
 182 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET    0x00F00000
 183 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH     0x20000
 184 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET    0x00F20000
 185 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH    0x200000
 186 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET   0x07000000
 187
 188 /*
 189  * Carve out a DDR region which will not be used by u-boot/Linux
 190  *
 191  * It will be used by MC and Debug Server. The MC region must be
 192  * 512MB aligned, so the min size to hide is 512MB.
 193  */
 194 #if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER)
 195 #define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE     (256UL * 1024 * 1024)
 196 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE            (256UL * 1024 * 1024)
 197 #define CONFIG_SYS_MEM_TOP_HIDE_MIN                     (512UL * 1024 * 1024)
 198 #define CONFIG_SYS_MEM_TOP_HIDE         get_dram_size_to_hide()
 199 #endif
 200
 201 /* PCIe */
 202 #define CONFIG_PCIE1            /* PCIE controler 1 */
 203 #define CONFIG_PCIE2            /* PCIE controler 2 */
 204 #define CONFIG_PCIE3            /* PCIE controler 3 */
 205 #define CONFIG_PCIE4            /* PCIE controler 4 */
 206 #define CONFIG_PCIE_LAYERSCAPE  /* Use common FSL Layerscape PCIe code */
 207 #define FSL_PCIE_COMPAT "fsl,ls2085a-pcie"
 208
 209 #define CONFIG_SYS_PCI_64BIT
 210
 211 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
 212 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
 213 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
 214 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
 215
 216 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
 217 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
 218 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 219
 220 #define CONFIG_SYS_PCIE_MEM_BUS         0x40000000
 221 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x40000000
 222 #define CONFIG_SYS_PCIE_MEM_SIZE        0x40000000      /* 1G */
 223
 224 /* Command line configuration */
 225 #define CONFIG_CMD_CACHE
 226 #define CONFIG_CMD_DHCP
 227 #define CONFIG_CMD_ENV
 228 #define CONFIG_CMD_GREPENV
 229 #define CONFIG_CMD_MII
 230 #define CONFIG_CMD_PING
 231
 232 /* Miscellaneous configurable options */
 233 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 234 #define CONFIG_ARCH_EARLY_INIT_R
 235
 236 /* Physical Memory Map */
 237 /* fixme: these need to be checked against the board */
 238 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 239
 240 #define CONFIG_NR_DRAM_BANKS            3
 241
 242 #define CONFIG_HWCONFIG
 243 #define HWCONFIG_BUFFER_SIZE            128
 244
 245 #define CONFIG_DISPLAY_CPUINFO
 246
 247 /* Initial environment variables */
 248 #define CONFIG_EXTRA_ENV_SETTINGS               \
 249         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 250         "loadaddr=0x80100000\0"                 \
 251         "kernel_addr=0x100000\0"                \
 252         "ramdisk_addr=0x800000\0"               \
 253         "ramdisk_size=0x2000000\0"              \
 254         "fdt_high=0xa0000000\0"                 \
 255         "initrd_high=0xffffffffffffffff\0"      \
 256         "kernel_start=0x581200000\0"            \
 257         "kernel_load=0xa0000000\0"              \
 258         "kernel_size=0x2800000\0"               \
 259         "console=ttyAMA0,38400n8\0"
 260
 261 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/ram0 " \
 262                                 "earlycon=uart8250,mmio,0x21c0500,115200 " \
 263                                 "ramdisk_size=0x2000000 default_hugepagesz=2m" \
 264                                 " hugepagesz=2m hugepages=16"
 265 #define CONFIG_BOOTCOMMAND              "cp.b $kernel_start $kernel_load "     \
 266                                         "$kernel_size && bootm $kernel_load"
 267 #define CONFIG_BOOTDELAY                10
 268
 269 /* Monitor Command Prompt */
 270 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 271 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 272                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 273 #define CONFIG_SYS_HUSH_PARSER
 274 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 275 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
 276 #define CONFIG_SYS_LONGHELP
 277 #define CONFIG_CMDLINE_EDITING          1
 278 #define CONFIG_AUTO_COMPLETE
 279 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 280
 281 #ifndef __ASSEMBLY__
 282 unsigned long get_dram_size_to_hide(void);
 283 #endif
 284
 285 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 286
 287 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 288 #define CONFIG_SPL_BSS_MAX_SIZE         0x00100000
 289 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 290 #define CONFIG_SPL_ENV_SUPPORT
 291 #define CONFIG_SPL_FRAMEWORK
 292 #define CONFIG_SPL_I2C_SUPPORT
 293 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 294 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 295 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 296 #define CONFIG_SPL_MAX_SIZE             0x16000
 297 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 298 #define CONFIG_SPL_NAND_SUPPORT
 299 #define CONFIG_SPL_SERIAL_SUPPORT
 300 #define CONFIG_SPL_STACK                (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 301 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 302 #define CONFIG_SPL_TEXT_BASE            0x1800a000
 303
 304 #define CONFIG_SYS_NAND_U_BOOT_DST      0x80400000
 305 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 306 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00100000
 307 #define CONFIG_SYS_SPL_MALLOC_START     0x80200000
 308 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 309
 310 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 311
 312
 313 #endif /* __LS2_COMMON_H */