include/configs/lsxl.h

   1 /*
   2  * Copyright (c) 2012 Michael Walle
   3  * Michael Walle <michael@walle.cc>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _CONFIG_LSXL_H
   9 #define _CONFIG_LSXL_H
  10
  11
  12 /*
  13  * Version number information
  14  */
  15 #if defined(CONFIG_LSCHLV2)
  16 #define CONFIG_IDENT_STRING " LS-CHLv2"
  17 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  18 #define CONFIG_MACH_TYPE 3006
  19 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
  20 #elif defined(CONFIG_LSXHL)
  21 #define CONFIG_IDENT_STRING " LS-XHL"
  22 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  23 #define CONFIG_MACH_TYPE 2663
  24 /* CONFIG_SYS_TCLK is 200000000 by default */
  25 #else
  26 #error "unknown board"
  27 #endif
  28
  29 /*
  30  * General configuration options
  31  */
  32 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  33 #define CONFIG_KW88F6281                /* SOC Name */
  34
  35 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  36 #define CONFIG_MISC_INIT_R
  37 #define CONFIG_SHOW_BOOT_PROGRESS
  38
  39 #define CONFIG_KIRKWOOD_GPIO
  40
  41 #define CONFIG_SYS_NO_FLASH
  42 #define CONFIG_SYS_HUSH_PARSER
  43 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  44 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  45
  46 /*
  47  * Enable u-boot API for standalone programs.
  48  */
  49 #define CONFIG_API
  50
  51 /*
  52  * Commands configuration
  53  */
  54 #define CONFIG_CMD_BOOTZ
  55 #define CONFIG_CMD_DHCP
  56 #define CONFIG_CMD_ENV
  57 #define CONFIG_CMD_EXT2
  58 #define CONFIG_CMD_FAT
  59 #define CONFIG_CMD_IDE
  60 #define CONFIG_CMD_PING
  61 #define CONFIG_CMD_PING
  62 #define CONFIG_CMD_SF
  63 #define CONFIG_CMD_SPI
  64 #define CONFIG_CMD_USB
  65 #define CONFIG_CMD_FS_GENERIC
  66
  67 #define CONFIG_DOS_PARTITION
  68 #define CONFIG_EFI_PARTITION
  69
  70 /*
  71  * mv-common.h should be defined after CMD configs since it used them
  72  * to enable certain macros
  73  */
  74 #include "mv-common.h"
  75
  76 /* loading initramfs images without uimage header */
  77 #define CONFIG_SUPPORT_RAW_INITRD
  78
  79 /* ST M25P40 */
  80 #undef CONFIG_ENV_SPI_MAX_HZ
  81 #define CONFIG_ENV_SPI_MAX_HZ           25000000
  82 #undef CONFIG_SF_DEFAULT_SPEED
  83 #define CONFIG_SF_DEFAULT_SPEED         25000000
  84
  85
  86 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  87
  88 /*
  89  *  Environment variables configurations
  90  */
  91 #ifdef CONFIG_SPI_FLASH
  92 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  93 #define CONFIG_SYS_MAX_FLASH_SECT       8
  94 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  95 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64K */
  96 #else
  97 #define CONFIG_ENV_IS_NOWHERE
  98 #endif
  99
 100 #define CONFIG_ENV_SIZE                 0x10000 /* 64k */
 101 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
 102
 103 /*
 104  * Default environment variables
 105  */
 106 #define CONFIG_LOADADDR         0x00800000
 107 #define CONFIG_BOOTCOMMAND      "run bootcmd_${bootsource}"
 108 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/sda2"
 109
 110 #if defined(CONFIG_LSXHL)
 111 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
 112 #elif defined(CONFIG_LSCHLV2)
 113 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
 114 #else
 115 #error "Unsupported board"
 116 #endif
 117
 118 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 119         "bootsource=legacy\0"                                           \
 120         "hdpart=0:1\0"                                                  \
 121         "kernel_addr=0x00800000\0"                                      \
 122         "ramdisk_addr=0x01000000\0"                                     \
 123         "fdt_addr=0x00ff0000\0"                                         \
 124         "bootcmd_legacy=ide reset "                                     \
 125                 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
 126                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
 127                 "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
 128         "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
 129                 "&& tftpboot ${ramdisk_addr} initrd.img "               \
 130                 "&& setenv ramdisk_len ${filesize} "                    \
 131                 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
 132                 "&& bootz ${kernel_addr} "                              \
 133                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 134         "bootcmd_hdd=ide reset "                                        \
 135                 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz "        \
 136                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "    \
 137                 "&& setenv ramdisk_len ${filesize} "                    \
 138                 "&& load ide ${hdpart} ${fdt_addr} /dtb "               \
 139                 "&& bootz ${kernel_addr} "                              \
 140                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 141         "bootcmd_usb=usb start "                                        \
 142                 "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
 143                 "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
 144                 "&& setenv ramdisk_len ${filesize} "                    \
 145                 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
 146                 "&& bootz ${kernel_addr} "                              \
 147                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 148         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
 149         "eraseenv=sf probe 0 "                                          \
 150                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
 151                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
 152         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
 153                 "setenv autoload no "                                   \
 154                 "&& bootp "                                             \
 155                 "&& setenv ncip "                                       \
 156                 "&& setenv autoload ${autoload_old}; "                  \
 157                 "setenv autoload_old\0"                                 \
 158         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
 159                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
 160                 "setenv bootfile; setenv dnsip; "                       \
 161                 "setenv bootsource legacy; run ser\0"                   \
 162         "restore_env=run standard_env; saveenv; reset\0"                \
 163         "ser=setenv stdin serial; setenv stdout serial; "               \
 164                 "setenv stderr serial\0"                                \
 165         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 166         "stdin=serial\0"                                                \
 167         "stdout=serial\0"                                               \
 168         "stderr=serial\0"
 169
 170 /*
 171  * Ethernet Driver configuration
 172  */
 173 #ifdef CONFIG_CMD_NET
 174 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 175 #define CONFIG_PHY_BASE_ADR             7
 176 #undef CONFIG_RESET_PHY_R
 177 #endif /* CONFIG_CMD_NET */
 178
 179 #ifdef CONFIG_CMD_IDE
 180 #undef CONFIG_IDE_LED
 181 #undef CONFIG_SYS_IDE_MAXBUS
 182 #define CONFIG_SYS_IDE_MAXBUS           1
 183 #undef CONFIG_SYS_IDE_MAXDEVICE
 184 #define CONFIG_SYS_IDE_MAXDEVICE        1
 185 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 186 #define CONFIG_SYS_64BIT_LBA
 187 #endif
 188
 189 #endif /* _CONFIG_LSXL_H */