include/configs/lsxl.h

   1 /*
   2  * Copyright (c) 2012 Michael Walle
   3  * Michael Walle <michael@walle.cc>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _CONFIG_LSXL_H
   9 #define _CONFIG_LSXL_H
  10
  11 /*
  12  * Version number information
  13  */
  14 #if defined(CONFIG_LSCHLV2)
  15 #define CONFIG_IDENT_STRING " LS-CHLv2"
  16 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  17 #define CONFIG_MACH_TYPE 3006
  18 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
  19 #elif defined(CONFIG_LSXHL)
  20 #define CONFIG_IDENT_STRING " LS-XHL"
  21 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  22 #define CONFIG_MACH_TYPE 2663
  23 /* CONFIG_SYS_TCLK is 200000000 by default */
  24 #else
  25 #error "unknown board"
  26 #endif
  27
  28 /*
  29  * General configuration options
  30  */
  31 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  32 #define CONFIG_KW88F6281                /* SOC Name */
  33
  34 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  35 #define CONFIG_MISC_INIT_R
  36 #define CONFIG_SHOW_BOOT_PROGRESS
  37
  38 #define CONFIG_KIRKWOOD_GPIO
  39
  40 #define CONFIG_SYS_NO_FLASH
  41 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  42 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  43
  44 /*
  45  * Enable u-boot API for standalone programs.
  46  */
  47 #define CONFIG_API
  48
  49 /*
  50  * Commands configuration
  51  */
  52 #define CONFIG_CMD_ENV
  53 #define CONFIG_CMD_IDE
  54
  55 #define CONFIG_DOS_PARTITION
  56 #define CONFIG_EFI_PARTITION
  57
  58 /*
  59  * mv-common.h should be defined after CMD configs since it used them
  60  * to enable certain macros
  61  */
  62 #include "mv-common.h"
  63
  64 /* loading initramfs images without uimage header */
  65 #define CONFIG_SUPPORT_RAW_INITRD
  66
  67 /* ST M25P40 */
  68 #undef CONFIG_ENV_SPI_MAX_HZ
  69 #define CONFIG_ENV_SPI_MAX_HZ           25000000
  70 #undef CONFIG_SF_DEFAULT_SPEED
  71 #define CONFIG_SF_DEFAULT_SPEED         25000000
  72
  73 /*
  74  *  Environment variables configurations
  75  */
  76 #ifdef CONFIG_SPI_FLASH
  77 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  78 #define CONFIG_SYS_MAX_FLASH_SECT       8
  79 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  80 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64K */
  81 #else
  82 #define CONFIG_ENV_IS_NOWHERE
  83 #endif
  84
  85 #define CONFIG_ENV_SIZE                 0x10000 /* 64k */
  86 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
  87
  88 /*
  89  * Default environment variables
  90  */
  91 #define CONFIG_LOADADDR         0x00800000
  92 #define CONFIG_BOOTCOMMAND      "run bootcmd_${bootsource}"
  93 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/sda2"
  94
  95 #if defined(CONFIG_LSXHL)
  96 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
  97 #elif defined(CONFIG_LSCHLV2)
  98 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
  99 #else
 100 #error "Unsupported board"
 101 #endif
 102
 103 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 104         "bootsource=legacy\0"                                           \
 105         "hdpart=0:1\0"                                                  \
 106         "kernel_addr=0x00800000\0"                                      \
 107         "ramdisk_addr=0x01000000\0"                                     \
 108         "fdt_addr=0x00ff0000\0"                                         \
 109         "bootcmd_legacy=ide reset "                                     \
 110                 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
 111                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
 112                 "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
 113         "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
 114                 "&& tftpboot ${ramdisk_addr} initrd.img "               \
 115                 "&& setenv ramdisk_len ${filesize} "                    \
 116                 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
 117                 "&& bootz ${kernel_addr} "                              \
 118                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 119         "bootcmd_hdd=ide reset "                                        \
 120                 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz "        \
 121                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "    \
 122                 "&& setenv ramdisk_len ${filesize} "                    \
 123                 "&& load ide ${hdpart} ${fdt_addr} /dtb "               \
 124                 "&& bootz ${kernel_addr} "                              \
 125                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 126         "bootcmd_usb=usb start "                                        \
 127                 "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
 128                 "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
 129                 "&& setenv ramdisk_len ${filesize} "                    \
 130                 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
 131                 "&& bootz ${kernel_addr} "                              \
 132                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 133         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
 134         "eraseenv=sf probe 0 "                                          \
 135                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
 136                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
 137         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
 138                 "setenv autoload no "                                   \
 139                 "&& bootp "                                             \
 140                 "&& setenv ncip "                                       \
 141                 "&& setenv autoload ${autoload_old}; "                  \
 142                 "setenv autoload_old\0"                                 \
 143         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
 144                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
 145                 "setenv bootfile; setenv dnsip; "                       \
 146                 "setenv bootsource legacy; run ser\0"                   \
 147         "restore_env=run standard_env; saveenv; reset\0"                \
 148         "ser=setenv stdin serial; setenv stdout serial; "               \
 149                 "setenv stderr serial\0"                                \
 150         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 151         "stdin=serial\0"                                                \
 152         "stdout=serial\0"                                               \
 153         "stderr=serial\0"
 154
 155 /*
 156  * Ethernet Driver configuration
 157  */
 158 #ifdef CONFIG_CMD_NET
 159 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 160 #define CONFIG_PHY_BASE_ADR             7
 161 #undef CONFIG_RESET_PHY_R
 162 #endif /* CONFIG_CMD_NET */
 163
 164 #ifdef CONFIG_CMD_IDE
 165 #undef CONFIG_IDE_LED
 166 #undef CONFIG_SYS_IDE_MAXBUS
 167 #define CONFIG_SYS_IDE_MAXBUS           1
 168 #undef CONFIG_SYS_IDE_MAXDEVICE
 169 #define CONFIG_SYS_IDE_MAXDEVICE        1
 170 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 171 #define CONFIG_SYS_64BIT_LBA
 172 #endif
 173
 174 #endif /* _CONFIG_LSXL_H */