include/configs/m28evk.h

   1 /*
   2  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
   3  * on behalf of DENX Software Engineering GmbH
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License as
   7  * published by the Free Software Foundation; either version 2 of
   8  * the License, or (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  18  * MA 02111-1307 USA
  19  */
  20 #ifndef __M28EVK_CONFIG_H__
  21 #define __M28EVK_CONFIG_H__
  22
  23 /*
  24  * SoC configurations
  25  */
  26 #define CONFIG_MX28                             /* i.MX28 SoC */
  27 #define CONFIG_MXS_GPIO                         /* GPIO control */
  28 #define CONFIG_SYS_HZ           1000            /* Ticks per second */
  29
  30 /*
  31  * Define M28EVK machine type by hand until it lands in mach-types
  32  */
  33 #define MACH_TYPE_M28EVK        3613
  34
  35 #define CONFIG_MACH_TYPE        MACH_TYPE_M28EVK
  36
  37 #include <asm/arch/regs-base.h>
  38
  39 #define CONFIG_SYS_NO_FLASH
  40 #define CONFIG_BOARD_EARLY_INIT_F
  41 #define CONFIG_ARCH_MISC_INIT
  42
  43 /*
  44  * SPL
  45  */
  46 #define CONFIG_SPL
  47 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE
  48 #define CONFIG_SPL_START_S_PATH         "arch/arm/cpu/arm926ejs/mxs"
  49 #define CONFIG_SPL_LDSCRIPT     "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
  50 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  51 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  52 #define CONFIG_SPL_GPIO_SUPPORT
  53
  54 /*
  55  * U-Boot Commands
  56  */
  57 #include <config_cmd_default.h>
  58 #define CONFIG_DISPLAY_CPUINFO
  59 #define CONFIG_DOS_PARTITION
  60
  61 #define CONFIG_CMD_CACHE
  62 #define CONFIG_CMD_DATE
  63 #define CONFIG_CMD_DHCP
  64 #define CONFIG_CMD_EEPROM
  65 #define CONFIG_CMD_EXT2
  66 #define CONFIG_CMD_FAT
  67 #define CONFIG_CMD_GPIO
  68 #define CONFIG_CMD_GREPENV
  69 #define CONFIG_CMD_I2C
  70 #define CONFIG_CMD_MII
  71 #define CONFIG_CMD_MMC
  72 #define CONFIG_CMD_NAND
  73 #define CONFIG_CMD_NET
  74 #define CONFIG_CMD_NFS
  75 #define CONFIG_CMD_PING
  76 #define CONFIG_CMD_SETEXPR
  77 #define CONFIG_CMD_SF
  78 #define CONFIG_CMD_SPI
  79 #define CONFIG_CMD_USB
  80 #define CONFIG_VIDEO
  81
  82 #define CONFIG_REGEX                    /* Enable regular expression support */
  83
  84 /*
  85  * Memory configurations
  86  */
  87 #define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
  88 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  89 #define PHYS_SDRAM_1_SIZE               0x20000000      /* Max 512 MB RAM */
  90 #define CONFIG_SYS_MALLOC_LEN           0x00400000      /* 4 MB for malloc */
  91 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* Initial data */
  92 #define CONFIG_SYS_MEMTEST_START        0x40000000      /* Memtest start adr */
  93 #define CONFIG_SYS_MEMTEST_END          0x40400000      /* 4 MB RAM test */
  94 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  95 /* Point initial SP in SRAM so SPL can use it too. */
  96
  97 #define CONFIG_SYS_INIT_RAM_ADDR        0x00000000
  98 #define CONFIG_SYS_INIT_RAM_SIZE        (128 * 1024)
  99
 100 #define CONFIG_SYS_INIT_SP_OFFSET \
 101         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 102 #define CONFIG_SYS_INIT_SP_ADDR \
 103         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 104 /*
 105  * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
 106  * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
 107  * binary. In case there was more of this mess, 0x100 bytes are skipped.
 108  */
 109 #define CONFIG_SYS_TEXT_BASE            0x40000100
 110
 111 /*
 112  * U-Boot general configurations
 113  */
 114 #define CONFIG_SYS_LONGHELP
 115 #define CONFIG_SYS_PROMPT       "=> "
 116 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
 117 #define CONFIG_SYS_PBSIZE       \
 118         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 119                                                 /* Print buffer size */
 120 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
 121 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 122                                                 /* Boot argument buffer size */
 123 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
 124 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
 125 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
 126 #define CONFIG_SYS_HUSH_PARSER
 127
 128 /*
 129  * Serial Driver
 130  */
 131 #define CONFIG_PL011_SERIAL
 132 #define CONFIG_PL011_CLOCK              24000000
 133 #define CONFIG_PL01x_PORTS              { (void *)MXS_UARTDBG_BASE }
 134 #define CONFIG_CONS_INDEX               0
 135 #define CONFIG_BAUDRATE                 115200  /* Default baud rate */
 136
 137 /*
 138  * MMC Driver
 139  */
 140 #ifdef  CONFIG_CMD_MMC
 141 #define CONFIG_MMC
 142 #define CONFIG_BOUNCE_BUFFER
 143 #define CONFIG_GENERIC_MMC
 144 #define CONFIG_MXS_MMC
 145 #endif
 146
 147 /*
 148  * APBH DMA
 149  */
 150 #define CONFIG_APBH_DMA
 151
 152 /*
 153  * NAND
 154  */
 155 #define CONFIG_ENV_SIZE                 (16 * 1024)
 156 #ifdef  CONFIG_CMD_NAND
 157 #define CONFIG_NAND_MXS
 158 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 159 #define CONFIG_SYS_NAND_BASE            0x60000000
 160 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 161
 162 /* Environment is in NAND */
 163 #define CONFIG_ENV_IS_IN_NAND
 164 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 165 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 166 #define CONFIG_ENV_RANGE                (512 * 1024)
 167 #define CONFIG_ENV_OFFSET               0x300000
 168 #define CONFIG_ENV_OFFSET_REDUND        \
 169                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 170
 171 #define CONFIG_CMD_UBI
 172 #define CONFIG_CMD_UBIFS
 173 #define CONFIG_CMD_MTDPARTS
 174 #define CONFIG_RBTREE
 175 #define CONFIG_LZO
 176 #define CONFIG_MTD_DEVICE
 177 #define CONFIG_MTD_PARTITIONS
 178 #define MTDIDS_DEFAULT                  "nand0=gpmi-nand"
 179 #define MTDPARTS_DEFAULT                        \
 180         "mtdparts=gpmi-nand:"                   \
 181                 "3m(bootloader)ro,"             \
 182                 "512k(environment),"            \
 183                 "512k(redundant-environment),"  \
 184                 "4m(kernel),"                   \
 185                 "128k(fdt),"                    \
 186                 "8m(ramdisk),"                  \
 187                 "-(filesystem)"
 188 #else
 189 #define CONFIG_ENV_IS_NOWHERE
 190 #endif
 191
 192 /*
 193  * Ethernet on SOC (FEC)
 194  */
 195 #ifdef  CONFIG_CMD_NET
 196 #define CONFIG_ETHPRIME                 "FEC0"
 197 #define CONFIG_FEC_MXC
 198 #define CONFIG_MII
 199 #define CONFIG_FEC_XCV_TYPE             RMII
 200 #endif
 201
 202 /*
 203  * I2C
 204  */
 205 #ifdef  CONFIG_CMD_I2C
 206 #define CONFIG_I2C_MXS
 207 #define CONFIG_HARD_I2C
 208 #define CONFIG_SYS_I2C_SPEED            400000
 209 #endif
 210
 211 /*
 212  * EEPROM
 213  */
 214 #ifdef  CONFIG_CMD_EEPROM
 215 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 216 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 217 #endif
 218
 219 /*
 220  * RTC
 221  */
 222 #ifdef  CONFIG_CMD_DATE
 223 /* Use the internal RTC in the MXS chip */
 224 #define CONFIG_RTC_INTERNAL
 225 #ifdef  CONFIG_RTC_INTERNAL
 226 #define CONFIG_RTC_MXS
 227 #else
 228 #define CONFIG_RTC_M41T62
 229 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 230 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 231 #endif
 232 #endif
 233
 234 /*
 235  * USB
 236  */
 237 #ifdef  CONFIG_CMD_USB
 238 #define CONFIG_USB_EHCI
 239 #define CONFIG_USB_EHCI_MXS
 240 #define CONFIG_EHCI_MXS_PORT0
 241 #define CONFIG_EHCI_MXS_PORT1
 242 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 243 #define CONFIG_EHCI_IS_TDI
 244 #define CONFIG_USB_STORAGE
 245 #endif
 246
 247 /*
 248  * SPI
 249  */
 250 #ifdef  CONFIG_CMD_SPI
 251 #define CONFIG_HARD_SPI
 252 #define CONFIG_MXS_SPI
 253 #define CONFIG_SPI_HALF_DUPLEX
 254 #define CONFIG_DEFAULT_SPI_BUS          2
 255 #define CONFIG_DEFAULT_SPI_CS           0
 256 #define CONFIG_DEFAULT_SPI_MODE         SPI_MODE_0
 257
 258 /* SPI FLASH */
 259 #ifdef  CONFIG_CMD_SF
 260 #define CONFIG_SPI_FLASH
 261 #define CONFIG_SPI_FLASH_STMICRO
 262 #define CONFIG_SF_DEFAULT_BUS           2
 263 #define CONFIG_SF_DEFAULT_CS            0
 264 #define CONFIG_SF_DEFAULT_SPEED         40000000
 265 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 266
 267 #define CONFIG_ENV_SPI_BUS              2
 268 #define CONFIG_ENV_SPI_CS               0
 269 #define CONFIG_ENV_SPI_MAX_HZ           40000000
 270 #define CONFIG_ENV_SPI_MODE             SPI_MODE_0
 271 #endif
 272 #endif
 273
 274 /*
 275  * LCD
 276  */
 277 #ifdef  CONFIG_VIDEO
 278 #define CONFIG_CFB_CONSOLE
 279 #define CONFIG_VIDEO_MXS
 280 #define CONFIG_VIDEO_LOGO
 281 #define CONFIG_VIDEO_SW_CURSOR
 282 #define CONFIG_VGA_AS_SINGLE_DEVICE
 283 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 284 #define CONFIG_SPLASH_SCREEN
 285 #define CONFIG_CMD_BMP
 286 #define CONFIG_BMP_16BPP
 287 #define CONFIG_VIDEO_BMP_RLE8
 288 #define CONFIG_VIDEO_BMP_GZIP
 289 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (512 << 10)
 290 #endif
 291
 292 /*
 293  * Boot Linux
 294  */
 295 #define CONFIG_CMDLINE_TAG
 296 #define CONFIG_SETUP_MEMORY_TAGS
 297 #define CONFIG_BOOTDELAY        3
 298 #define CONFIG_BOOTFILE         "uImage"
 299 #define CONFIG_BOOTARGS         "console=ttyAMA0,115200n8 "
 300 #define CONFIG_BOOTCOMMAND      "run bootcmd_net"
 301 #define CONFIG_LOADADDR         0x42000000
 302 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 303 #define CONFIG_OF_LIBFDT
 304
 305 /*
 306  * Extra Environments
 307  */
 308 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 309         "update_nand_full_filename=u-boot.nand\0"                       \
 310         "update_nand_firmware_filename=u-boot.sb\0"                     \
 311         "update_sd_firmware_filename=u-boot.sd\0"                       \
 312         "update_nand_firmware_maxsz=0x100000\0"                         \
 313         "update_nand_stride=0x40\0"     /* MX28 datasheet ch. 12.12 */  \
 314         "update_nand_count=0x4\0"       /* MX28 datasheet ch. 12.12 */  \
 315         "update_nand_get_fcb_size="     /* Get size of FCB blocks */    \
 316                 "nand device 0 ; "                                      \
 317                 "nand info ; "                                          \
 318                 "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
 319                 "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
 320         "update_nand_full="             /* Update FCB, DBBT and FW */   \
 321                 "if tftp ${update_nand_full_filename} ; then "          \
 322                 "run update_nand_get_fcb_size ; "                       \
 323                 "nand scrub -y 0x0 ${filesize} ; "                      \
 324                 "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "   \
 325                 "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
 326                 "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
 327                 "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
 328                 "fi\0"                                                  \
 329         "update_nand_firmware="         /* Update only firmware */      \
 330                 "if tftp ${update_nand_firmware_filename} ; then "      \
 331                 "run update_nand_get_fcb_size ; "                       \
 332                 "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
 333                 "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; "    \
 334                 "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
 335                 "nand erase ${fcb_sz} ${fw_sz} ; "                      \
 336                 "nand write ${loadaddr} ${fcb_sz} ${filesize} ; "       \
 337                 "nand write ${loadaddr} ${fw_off} ${filesize} ; "       \
 338                 "fi\0"                                                  \
 339         "update_sd_firmware="           /* Update the SD firmware partition */ \
 340                 "if mmc rescan ; then "                                 \
 341                 "if tftp ${update_sd_firmware_filename} ; then "        \
 342                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
 343                 "setexpr fw_sz ${fw_sz} + 1 ; "                         \
 344                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; "               \
 345                 "fi ; "                                                 \
 346                 "fi\0"
 347
 348 #endif /* __M28EVK_CONFIG_H__ */